On Thu, 7 Dec 2017, Aaron Armstrong Skomra wrote:
> Background: ExpressKey Remotes communicate their events via usb dongle.
> Each dongle can hold up to 5 pairings at one time and one EKR (identified
> by its serial number) can unfortunately be paired with its dongle
> more than once. The pairing takes place in a round-robin fashion.
>
> Input devices are only created once per EKR, when a new serial number
> is seen in the list of pairings. However, if a device is created for
> a "higher" paring index and subsequently a second pairing occurs at a
> lower pairing index, unpairing the remote with that serial number from
> any pairing index will currently cause a driver crash. This occurs
> infrequently, as two remotes are necessary to trigger this bug and most
> users have only one remote.
>
> As an illustration, to trigger the bug you need to have two remotes,
> and pair them in this order:
>
> 1. slot 0 -> remote 1 (input device created for remote 1)
> 2. slot 1 -> remote 1 (duplicate pairing - no device created)
> 3. slot 2 -> remote 1 (duplicate pairing - no device created)
> 4. slot 3 -> remote 1 (duplicate pairing - no device created)
> 5. slot 4 -> remote 2 (input device created for remote 2)
>
> 6. slot 0 -> remote 2 (1 destroyed and recreated at slot 1)
> 7. slot 1 -> remote 2 (1 destroyed and recreated at slot 2)
> 8. slot 2 -> remote 2 (1 destroyed and recreated at slot 3)
> 9. slot 3 -> remote 2 (1 destroyed and not recreated)
> 10. slot 4 -> remote 2 (2 was already in this slot so no changes)
>
> 11. slot 0 -> remote 1 (The current code sees remote 2 was paired over in
> one of the dongle slots it occupied and attempts
> to remove all information about remote 2 [1]. It
> calls wacom_remote_destroy_one for remote 2, but
> the destroy function assumes the lowest index is
> where the remote's input device was created. The
> code "cleans up" the other remote 2 pairings
> including the one which the input device was based
> on, assuming they were were just duplicate
> pairings. However, the cleanup doesn't call the
> devres release function for the input device that
> was created in slot 4).
>
> This issue is fixed by this commit.
>
> [1] Remote 2 should subsequently be re-created on the next packet from the
> EKR at the lowest numbered slot that it occupies (here slot 1).
>
> Fixes: f9036bd43602 ("HID: wacom: EKR: use devres groups to manage resources")
> Cc: stable <stable@xxxxxxxxxxxxxxx> #4.9
> Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@xxxxxxxxx>
Applied, thanks.
--
Jiri Kosina
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
