Hi Kevin, The Bluetooth and tablet issues are likely to be unrelated. The Bluetooth button is completely independent from the rest of the tablet, with neither the tablet sensor nor the Wacom driver being aware of it. >From what I understand, in normal operation the Bluetooth button is disconnected most of the time. When you press it, it briefly wakes up, connects to the paired PC, appears as a keyboard, sends a key combo, and then disconnects until you press it again. If you run something like `sudo libinput-debug-events` and then press the button, you should be able to see the key combo being sent (as well as the connect/disconnect). I'm not sure what's up with the deadlock warning that appears in dmesg, however... As for the tablet, the "last error = -121" indicates that we got an EREMOTEIO error. I've not come across that particular error in this function before. I'll need some time to track down why we might be getting this from the lower layers. Jason --- Now instead of four in the eights place / you’ve got three, ‘Cause you added one / (That is to say, eight) to the two, / But you can’t take seven from three, / So you look at the sixty-fours.... On Mon, Nov 27, 2017 at 12:23 PM, Kevin Fenzi <kevin@xxxxxxxxx> wrote: > Greetings. > > I'm running into some problems with Lenovo active pen 2 and wacom tablet > on a new yoga 920. > > Filed: > https://bugzilla.redhat.com/show_bug.cgi?id=1514837 > > but I thought I would ask here if anyone had any ideas... > > Basically when pairing the pen it shows for a second, then drops: > > [Sat Nov 18 12:22:42 2017] input: Lenovo Active Pen2 as > /devices/virtual/misc/uhid/0005:17EF:60A8.0006/input/input23 > [Sat Nov 18 12:22:42 2017] hid-generic 0005:17EF:60A8.0006: > input,hidraw4: BLUETOOTH HID v0.02 Keyboard [Lenovo Active Pen2] on > 64:6E:69:D1:A0:48 > [Sat Nov 18 12:22:47 2017] Bluetooth: hci0: last event is not cmd > complete (0x0f) > [Sat Nov 18 12:23:03 2017] Bluetooth: hci0: last event is not cmd > complete (0x0f) > [Sat Nov 18 12:23:19 2017] Bluetooth: hci0: last event is not cmd > complete (0x0f) > > The wacom tablet is never connecting: > > [Fri Nov 24 21:47:01 2017] input: Wacom HID 5110 Pen as > /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM5110:00/0018:056A:5110.0003/input/input26 > [Fri Nov 24 21:47:01 2017] input: Wacom HID 5110 Finger as > /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM5110:00/0018:056A:5110.0003/input/input27 > [Fri Nov 24 21:47:01 2017] wacom 0018:056A:5110.0003: hidraw3: I2C HID > v1.00 Mouse [WCOM5110:00 056A:5110] on i2c-WCOM5110:00 > [Fri Nov 24 21:47:02 2017] i2c_hid i2c-WCOM5110:00: failed to set a > report to device. > [Fri Nov 24 21:47:02 2017] wacom 0018:056A:5110.0003: wacom_set_report: > ran out of retries (last error = -121) > [Fri Nov 24 21:47:02 2017] i2c_hid i2c-WCOM5110:00: failed to set a > report to device. > > Happy to gather more info and/or try patches. > > Thanks. > > kevin > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
