The property "post-power-on-delay-ms" allows a platform to specify
the delay needed after power-on, but only via device trees currently.
Use device_property_* instead of of_* reads to allow ACPI systems to
also provide the same information. This is useful for Wacom hardware
on ACPI systems.
Signed-off-by: Rajat Jain <rajatja@xxxxxxxxxx>
---
v3: introduce i2c_hid_fwnode_probe() to parse common device_properties.
Also fixup the binding doc to indicate that regulator isn't a
requirement for "post-power-on-delay-ms"
v2: Don't change any other existing logic, only read "post-power-on-delay-ms"
in i2c_hid_acpi_pdata() also.
v1: Try to unify everything using device properties, convert i2c_hid_of_probe()
to i2c_hid_fwnode_probe() and call i2c_hid_acpi_pdata() if can't get
HID register address using device_property.
.../devicetree/bindings/input/hid-over-i2c.txt | 2 +-
drivers/hid/i2c-hid/i2c-hid.c | 18 +++++++++++++-----
2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index 28e8bd8b7d64..4d3da9d91de4 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -31,7 +31,7 @@ device-specific compatible properties, which should be used in addition to the
- vdd-supply: phandle of the regulator that provides the supply voltage.
- post-power-on-delay-ms: time required by the device after enabling its regulators
- before it is ready for communication. Must be used with 'vdd-supply'.
+ or powering it on, before it is ready for communication.
Example:
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 77396145d2d0..741a457dfe61 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -928,11 +928,6 @@ static int i2c_hid_of_probe(struct i2c_client *client,
}
pdata->hid_descriptor_address = val;
- ret = of_property_read_u32(dev->of_node, "post-power-on-delay-ms",
- &val);
- if (!ret)
- pdata->post_power_delay_ms = val;
-
return 0;
}
@@ -949,6 +944,16 @@ static inline int i2c_hid_of_probe(struct i2c_client *client,
}
#endif
+static void i2c_hid_fwnode_probe(struct i2c_client *client,
+ struct i2c_hid_platform_data *pdata)
+{
+ u32 val;
+
+ if (!device_property_read_u32(&client->dev, "post-power-on-delay-ms",
+ &val))
+ pdata->post_power_delay_ms = val;
+}
+
static int i2c_hid_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
@@ -992,6 +997,9 @@ static int i2c_hid_probe(struct i2c_client *client,
ihid->pdata = *platform_data;
}
+ /* Parse platform agnostic common properties from ACPI / device tree */
+ i2c_hid_fwnode_probe(client, &ihid->pdata);
+
ihid->pdata.supply = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(ihid->pdata.supply)) {
ret = PTR_ERR(ihid->pdata.supply);
--
2.14.2.822.g60be5d43e6-goog
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
