On Mon, Sep 25, 2017 at 06:34:28PM +0200, Linus Walleij wrote:
> This adds DT bindings for simple mice attached to GPIO lines.
> As the properties are very general and pertains to all mice I
> can think of, we use very generic names for the 4-7 GPIO lines,
> "up", "down" etc.
>
> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@xxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Adding Rob. I am good with the patches unless there is objection to the
binding...
> ---
> ChangeLog v1->v2:
> - Collect Hand-Christian's ACK
> - Uses 5-7 lines rather than 4-7 lines
> - Add suffix "-ms" to the scan interval property
> - Fix compatible string in the example
> ---
> .../devicetree/bindings/input/gpio-mouse.txt | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/gpio-mouse.txt
>
> diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.txt b/Documentation/devicetree/bindings/input/gpio-mouse.txt
> new file mode 100644
> index 000000000000..519510a11af9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/gpio-mouse.txt
> @@ -0,0 +1,32 @@
> +Device-Tree bindings for GPIO attached mice
> +
> +This simply uses standard GPIO handles to define a simple mouse connected
> +to 5-7 GPIO lines.
> +
> +Required properties:
> + - compatible: must be "gpio-mouse"
> + - scan-interval-ms: The scanning interval in milliseconds
> + - up-gpios: GPIO line phandle to the line indicating "up"
> + - down-gpios: GPIO line phandle to the line indicating "down"
> + - left-gpios: GPIO line phandle to the line indicating "left"
> + - right-gpios: GPIO line phandle to the line indicating "right"
> +
> +Optional properties:
> + - button-left-gpios: GPIO line handle to the left mouse button
> + - button-middle-gpios: GPIO line handle to the middle mouse button
> + - button-right-gpios: GPIO line handle to the right mouse button
> +Example:
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +gpio-mouse {
> + compatible = "gpio-mouse";
> + scan-interval-ms = <50>;
> + up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
> + down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
> + left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> + right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
> + button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> + button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
> + button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
> +};
> --
> 2.13.5
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
