Hi Takashi, On Tue, Aug 22, 2017 at 07:57:09AM +0200, Takashi Iwai wrote: > This provides a new input driver for supporting the power button on > Dollar Cove TI PMIC, found on Cherrytrail-based devices. > The patch is based on the original work by Intel, found at: > https://github.com/01org/ProductionKernelQuilts > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891 > Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> > --- > drivers/input/keyboard/Kconfig | 7 +++ > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/dc_ti_pwrbtn.c | 85 +++++++++++++++++++++++++++++++++++ Not sure if it ends up in drivers/input/keyboard, or drivers/input/misc/ (where most power buttons live) or in platform drivers, still a few comments below. > 3 files changed, 93 insertions(+) > create mode 100644 drivers/input/keyboard/dc_ti_pwrbtn.c > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index 4c4ab1ced235..673748b3cc34 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -756,4 +756,11 @@ config KEYBOARD_BCM > To compile this driver as a module, choose M here: the > module will be called bcm-keypad. > > +config KEYBOARD_DC_TI_PWRBTN > + tristate "Dollar Cove TI power button driver" > + depends on INTEL_SOC_PMIC_DC_TI > + help > + Say Y here fi you want to have a power button driver for > + Dollar Cove TI PMIC. If keeping in input we customarily call out the module name (see a few lines above). > + > endif > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index d2338bacdad1..fa473d241e5c 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -66,3 +66,4 @@ obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o > obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o > obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o > obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o > +obj-$(CONFIG_KEYBOARD_DC_TI_PWRBTN) += dc_ti_pwrbtn.o > diff --git a/drivers/input/keyboard/dc_ti_pwrbtn.c b/drivers/input/keyboard/dc_ti_pwrbtn.c > new file mode 100644 > index 000000000000..a0900a440c92 > --- /dev/null > +++ b/drivers/input/keyboard/dc_ti_pwrbtn.c > @@ -0,0 +1,85 @@ > +/* > + * Power button driver for Dollar Cove TI PMIC > + * Copyright (C) 2014 Intel Corp > + * Copyright (c) 2017 Takashi Iwai <tiwai@xxxxxxx> > + */ > + > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/slab.h> > +#include <linux/device.h> > +#include <linux/platform_device.h> > +#include <linux/input.h> > +#include <linux/mfd/intel_soc_pmic.h> > + > +#define DC_TI_SIRQ_REG 0x3 > +#define SIRQ_PWRBTN_REL (1 << 0) BIT()? > + > +#define DRIVER_NAME "dc_ti_pwrbtn" > + > +static irqreturn_t dc_ti_pwrbtn_interrupt(int irq, void *dev_id) > +{ > + struct input_dev *pwrbtn_input = dev_id; > + struct device *dev = pwrbtn_input->dev.parent; > + struct regmap *regmap = dev_get_drvdata(dev); > + int state; > + > + if (!regmap_read(regmap, DC_TI_SIRQ_REG, &state)) { > + dev_dbg(dev, "SIRQ_REG=0x%x\n", state); > + state &= SIRQ_PWRBTN_REL; > + input_event(pwrbtn_input, EV_KEY, KEY_POWER, !state); Why not input_report_key(pwrbtn_input, KEY_POWER, !(state & SIRQ_PWRBTN_REL)); > + input_sync(pwrbtn_input); > + } > + > + return IRQ_HANDLED; > +} > + > +static int dc_ti_pwrbtn_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent); > + struct input_dev *pwrbtn_input; > + int irq; > + int ret; > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) > + return -EINVAL; Why do you clobber return value? Simply return "irq". > + pwrbtn_input = devm_input_allocate_device(dev); > + if (!pwrbtn_input) > + return -ENOMEM; > + pwrbtn_input->name = pdev->name; > + pwrbtn_input->phys = "dc-ti-power/input0"; > + pwrbtn_input->id.bustype = BUS_HOST; > + pwrbtn_input->dev.parent = dev; Not needed since devm_input_allocate_device() does it for us. > + input_set_capability(pwrbtn_input, EV_KEY, KEY_POWER); > + ret = input_register_device(pwrbtn_input); > + if (ret) > + return ret; If staying in input, can we please call this variable err or error? > + > + dev_set_drvdata(dev, pmic->regmap); > + > + ret = devm_request_threaded_irq(dev, irq, NULL, dc_ti_pwrbtn_interrupt, > + 0, KBUILD_MODNAME, pwrbtn_input); > + if (ret) > + return ret; > + > + ret = enable_irq_wake(irq); > + if (ret) > + dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret); We do not normally enable wake IRQs in probe, but instead do: device_init_wakeup(&pdev->dev, true); in probe() and then check it in suspend/resume: if (device_may_wakeup(dev)) { err = enable_irq_wake(XXX->irq); if (!err) XXX->irq_wake_enabled = true; } ... if (XXX->irq_wake_enabled) disable_irq_wake(XXX->irq); This allows userspace to inhibit wakeup, if needed. > + > + return 0; > +} > + > +static struct platform_driver dc_ti_pwrbtn_driver = { > + .driver = { > + .name = DRIVER_NAME, > + }, > + .probe = dc_ti_pwrbtn_probe, > +}; > + > +module_platform_driver(dc_ti_pwrbtn_driver); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:" DRIVER_NAME); > -- > 2.14.0 > Thanks! -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
