The PS/2 gpio device binding defines the gpio pins (data and clock)
as well as the interrupt which should be used to drive the ps/2 bus.
It is expected to get an interrupt on the falling edge of the clock
line.
Also it can be configured whether the host should support writing to
the device.
Signed-off-by: Danilo Krummrich <danilokrummrich@xxxxxxxxxxxxx>
---
.../devicetree/bindings/serio/ps2-gpio.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serio/ps2-gpio.txt
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.txt b/Documentation/devicetree/bindings/serio/ps2-gpio.txt
new file mode 100644
index 000000000000..83e05ea05883
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/ps2-gpio.txt
@@ -0,0 +1,22 @@
+Device-Tree binding for ps/2 gpio device
+
+Required properties:
+ - compatible = "ps2-gpio"
+ - gpios: data and clock gpio
+ - interrupts: Should trigger on the falling edge of the clock line.
+
+Optional properties:
+ - write-enable: Indicates whether write function is provided
+ to serio device. Possibly providing the write fn will not work, because
+ of the tough timing requirements.
+
+Example nodes:
+
+ps2@0 {
+ compatible = "ps2-gpio";
+ interrupt-parent = <&gpio>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ write-enable;
+};
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
