Am Freitag, 21. Juli 2017, 10:00:29 CEST schrieb Jianhong Chen: > > 在 2017/6/29 18:29, Heiko Stübner 写道: > > > Hi, > > > > Am Mittwoch, 14. Juni 2017, 20:11:06 CEST schrieb Jianhong Chen: > >> 在 2017/6/9 20:17, Heiko Stuebner 写道: > >>> Am Freitag, 9. Juni 2017, 13:37:26 CEST schrieb Linus Walleij: > >>>> Heiko, can you please look at this patch. > >>>> > >>>> On Thu, Jun 8, 2017 at 9:30 AM, Jianhong Chen <chenjh@xxxxxxxxxxxxxx> > > wrote: > >>>>> From: chenjh <chenjh@xxxxxxxxxxxxxx> > >>>> Full name please. > >>> git config --global user.name "John Doe" > >>> > >>> might do the and make this permanent for all your commits :-) > >>> > >>>>> RK805 has two configurable GPIOs that can be used for several > >>>>> purposes. These are output only. > >>>>> > >>>>> This driver is generic for other Rockchip PMICs to be added. > >>>>> > >>>>> Signed-off-by: chenjh <chenjh@xxxxxxxxxxxxxx> > >>>> Dito. > >>>> > >>>> Your commit message says they are output-only, yet you implement > >>>> .direction_input(). So what is is going to be? > >>> So far, I've only seen the rk808 and rk818. Both do not have any > >>> configurable pins. > >>> > >>> The rk805 which is a sort of variant of the above, does have the two > >>> pins defined below, but in the manual I could also only find them as > >>> output-only and having no other function than being output-pins. > >>> > >>> So I don't really know if all the input- or "gpio-mode"- handling is only > >>> an oversight (copy'n'paste) or if there are yet other rk808 variants > >>> around > >>> that can actually be configured as inputs or even non-gpio modes? > >>> > >>> I hope Jianhong will be able to answer that. > >>> > >>> > >>> Heiko > >> This driver is not only for rk805, but also intend for rk816 and furtrue > >> PMICs. > >> The rk816 has one multi function pin(TS/GPIO), when setting as gpio, it > >> can be configured as output or input. > >> Here is simple description from manual: "Thermistor input. Connect a > >> thermistor from this pin to ground. The thermistor is usually inside the > >> battery pack. (multi-function for GPIO) ". > > As Linus suggested, this sounds like you want a pinctrl driver that > > also handles the gpios. > > > > Ideally you might also directly provide support for this rk816 in the > > same patch series, so reviewers can see the full extend of what is > > supported. > > > > > > Heiko > > > > Hi, Heiko: > > I have moved gpio-rk805.c to drivers/pinctrl/pinctrl-rk805.c, this > driver is also designed for rk816 or furture PMICs to extend. > RK816 is not in our team's plan at this porting, it will be added > at next time, so I don't directly provide rk816 in this driver. I will > add more descriptions in commit message to express my design purpose. > > Are you agreed ? If so, I will send [PATCH v7] today. yep, sounds good. But we will of course see more, once you have sent the patches :-) . Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
