On Tue, Jul 11, 2017 at 05:01:47PM +0900, 김태영 wrote: > 2017-07-10 10:17 GMT+09:00 Rob Herring <robh@xxxxxxxxxx>: > > > > On Wed, Jul 05, 2017 at 03:19:48PM +0900, Anthony Kim wrote: > > > The HiDeep touchscreen device is a capacitive multi-touch controller > > > mainly for multi-touch supported devices use. It use I2C interface for > > > communication to IC and provide axis X, Y, Z locations for ten finger > > > touch through input event interface to userspace. > > > > > > It support the Crimson and the Lime two type IC. They are different > > > the number of channel supported and FW size. But the working protocol > > > is same. > > > > > > Signed-off-by: Anthony Kim <anthony.kim@xxxxxxxxxx> > > > --- > > > .../bindings/input/touchscreen/hideep.txt | 40 + > > > .../devicetree/bindings/vendor-prefixes.txt | 1 + > > > drivers/input/touchscreen/Kconfig | 32 + > > > drivers/input/touchscreen/Makefile | 2 + > > > drivers/input/touchscreen/hideep.h | 338 +++++++ > > > drivers/input/touchscreen/hideep_core.c | 1029 ++++++++++++++++++++ > > > drivers/input/touchscreen/hideep_dbg.c | 405 ++++++++ > > > drivers/input/touchscreen/hideep_dbg.h | 24 + > > > drivers/input/touchscreen/hideep_isp.c | 584 +++++++++++ > > > drivers/input/touchscreen/hideep_isp.h | 96 ++ > > > drivers/input/touchscreen/hideep_sysfs.c | 249 +++++ > > > 11 files changed, 2800 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hideep.txt > > > create mode 100644 drivers/input/touchscreen/hideep.h > > > create mode 100644 drivers/input/touchscreen/hideep_core.c > > > create mode 100644 drivers/input/touchscreen/hideep_dbg.c > > > create mode 100644 drivers/input/touchscreen/hideep_dbg.h > > > create mode 100644 drivers/input/touchscreen/hideep_isp.c > > > create mode 100644 drivers/input/touchscreen/hideep_isp.h > > > create mode 100644 drivers/input/touchscreen/hideep_sysfs.c > > > > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt > > > new file mode 100644 > > > index 0000000..f5ab5e6 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt > > > @@ -0,0 +1,40 @@ > > > +* HiDeep Finger and Stylus touchscreen controller > > > + > > > +Required properties: > > > +- compatible : must be "hideep,hideep_ts". > > > > s/_/-/ > > > > Is there only 1 version or another way to determine the exact chip and > > firmware? If not, then you need a more specific compatible. > > Yes, we have to determine the chip and firmware through the firmware file name > and reading I2C about info. How do you determine the firmware filename then? > Also the chip can select by kernel config. If the kernel knows the specific chip, then the DT certainly should have that. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
