The icn8505 variant is found on some x86 tablets, which use ACPI
enumeration, add support for ACPI enumeration.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/input/touchscreen/Kconfig | 2 +-
drivers/input/touchscreen/chipone_icn8318.c | 67 ++++++++++++++++++++++++++++-
2 files changed, 67 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index fff1467506e7..e3b52d356e13 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -155,7 +155,7 @@ config TOUCHSCREEN_CHIPONE_ICN8318
tristate "chipone icn8318 touchscreen controller"
depends on GPIOLIB || COMPILE_TEST
depends on I2C
- depends on OF
+ depends on OF || ACPI
help
Say Y here if you have a ChipOne icn8318 or icn8505 based
I2C touchscreen.
diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c
index 993df804883f..b209872954f7 100644
--- a/drivers/input/touchscreen/chipone_icn8318.c
+++ b/drivers/input/touchscreen/chipone_icn8318.c
@@ -12,6 +12,7 @@
* Hans de Goede <hdegoede@xxxxxxxxxx>
*/
+#include <linux/acpi.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@@ -232,6 +233,66 @@ static int icn8318_probe_of(struct icn8318_data *data, struct device *dev)
}
#endif
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id icn8318_acpi_match[] = {
+ { "CHPN0001", ICN8505 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, icn8318_acpi_match);
+
+static int icn8318_probe_acpi(struct icn8318_data *data, struct device *dev)
+{
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+ struct input_dev *input = data->input;
+ const struct acpi_device_id *id;
+ struct acpi_device *adev;
+ acpi_status status;
+ const char *sub;
+
+ adev = ACPI_COMPANION(dev);
+ id = acpi_match_device(icn8318_acpi_match, dev);
+ if (!adev || !id)
+ return -ENODEV;
+
+ data->model = id->driver_data;
+
+ /* The _SUB ACPI object describes the touchscreen model */
+ status = acpi_evaluate_object_typed(adev->handle, "_SUB", NULL,
+ &buf, ACPI_TYPE_STRING);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "ACPI _SUB object not found\n");
+ return -ENODEV;
+ }
+ sub = ((union acpi_object *)buf.pointer)->string.pointer;
+
+ if (strcmp(sub, "HAMP0002") == 0) {
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, 1199, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 1919, 0, 0);
+ } else {
+ dev_err(dev, "Unknown model _SUB: %s\n", sub);
+ kfree(buf.pointer);
+ return -ENODEV;
+ }
+ kfree(buf.pointer);
+
+ /*
+ * Disable ACPI power management the _PS3 method is empty, so
+ * there is no powersaving when using ACPI power management.
+ * The _PS0 method resets the controller causing it to loose its
+ * firmware, which has been loaded by the BIOS and we do not
+ * know how to restore the firmware.
+ */
+ adev->flags.power_manageable = 0;
+
+ return 0;
+}
+#else
+static int icn8318_probe_acpi(struct icn8318_data *data, struct device *dev)
+{
+ return -ENODEV;
+}
+#endif
+
static int icn8318_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
@@ -264,7 +325,10 @@ static int icn8318_probe(struct i2c_client *client)
input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
- error = icn8318_probe_of(data, dev);
+ if (client->dev.of_node)
+ error = icn8318_probe_of(data, dev);
+ else
+ error = icn8318_probe_acpi(data, dev);
if (error)
return error;
@@ -318,6 +382,7 @@ static struct i2c_driver icn8318_driver = {
.driver = {
.name = "chipone_icn8318",
.pm = &icn8318_pm_ops,
+ .acpi_match_table = ACPI_PTR(icn8318_acpi_match),
.of_match_table = icn8318_of_match,
},
.probe_new = icn8318_probe,
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
