On Wed, May 24, 2017 at 04:53:50PM +0800, 廖崇榮 wrote: > Hi Dmitry > > -----Original Message----- > From: Dmitry Torokhov [mailto:dmitry.torokhov@xxxxxxxxx] > Sent: Wednesday, May 24, 2017 5:14 AM > To: KT Liao > Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-input@xxxxxxxxxxxxxxx; > phoenix@xxxxxxxxxx > Subject: Re: [PATCH] Input: elan_i2c - Prevent breaking of FW updating from > unexpected signal > > Hi KT, > > On Tue, May 23, 2017 at 10:32:02PM +0800, KT Liao wrote: > > Use wait_for_completion_timeout to prevent breaking of FW updating from > unexpected signal > > > > Signed-off-by: KT Liao <kt.liao@xxxxxxxxxx> > > --- > > drivers/input/mouse/elan_i2c_i2c.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/input/mouse/elan_i2c_i2c.c > b/drivers/input/mouse/elan_i2c_i2c.c > > index 3be75c6e..34356c7 100644 > > --- a/drivers/input/mouse/elan_i2c_i2c.c > > +++ b/drivers/input/mouse/elan_i2c_i2c.c > > @@ -619,7 +619,7 @@ static int elan_i2c_finish_fw_update(struct i2c_client > *client, > > > > error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, > ETP_I2C_RESET); > > if (!error) > > - ret = wait_for_completion_interruptible_timeout(completion, > > + ret = wait_for_completion_timeout(completion, > > > msecs_to_jiffies(300)); > > disable_irq(client->irq); > > > > -- > > 2.7.4 > > > > wait_for_completion_timeout(), unlike > wait_for_completion_interruptible_timeout() returns unsigned long, so > the code below checking if 'ret' is negative, is no longer needed. How > about the version of the patch below? > [KT] : Thanks, it's ok. We have tested it on some Chrome system. Great, applied. > -- > Dmitry > > > Input: elan_i2c - ignore signals when finishing updating firmware > > From: KT Liao <kt.liao@xxxxxxxxxx> > > Use wait_for_completion_timeout() instead of > wait_for_completion_interruptible_timeout() to avoid stray signals ruining > firmware update. Our timeout is only 300 msec so we are fine simply letting > it expire in case device misbehaves. > > Signed-off-by: KT Liao <kt.liao@xxxxxxxxxx> > Patchwork-Id: 9742857 > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> > --- > drivers/input/mouse/elan_i2c_i2c.c | 21 ++++++++------------- > 1 file changed, 8 insertions(+), 13 deletions(-) > > diff --git a/drivers/input/mouse/elan_i2c_i2c.c > b/drivers/input/mouse/elan_i2c_i2c.c > index 3be75c6e8090..278832047075 100644 > --- a/drivers/input/mouse/elan_i2c_i2c.c > +++ b/drivers/input/mouse/elan_i2c_i2c.c > @@ -609,7 +609,6 @@ static int elan_i2c_finish_fw_update(struct i2c_client > *client, > struct completion *completion) > { > struct device *dev = &client->dev; > - long ret; > int error; > int len; > u8 buffer[ETP_I2C_INF_LENGTH]; > @@ -618,23 +617,19 @@ static int elan_i2c_finish_fw_update(struct i2c_client > *client, > enable_irq(client->irq); > > error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, > ETP_I2C_RESET); > - if (!error) > - ret = wait_for_completion_interruptible_timeout(completion, > - msecs_to_jiffies(300 > )); > - disable_irq(client->irq); > - > if (error) { > dev_err(dev, "device reset failed: %d\n", error); > - return error; > - } else if (ret == 0) { > + } else if (!wait_for_completion_timeout(completion, > + msecs_to_jiffies(300))) { > dev_err(dev, "timeout waiting for device reset\n"); > - return -ETIMEDOUT; > - } else if (ret < 0) { > - error = ret; > - dev_err(dev, "error waiting for device reset: %d\n", error); > - return error; > + error = -ETIMEDOUT; > } > > + disable_irq(client->irq); > + > + if (error) > + return error; > + > len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH); > if (len != ETP_I2C_INF_LENGTH) { > error = len < 0 ? len : -EIO; > -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
