This adds device tree bindings for the D-Link DIR-685 touchpad.
It's a simple homebrewn touchpad on I2C.
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
.../bindings/input/dlink,dir685-touchpad.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt
diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt
new file mode 100644
index 000000000000..25bc538a6e39
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt
@@ -0,0 +1,21 @@
+* D-Link DIR-685 Touchpad
+
+This is a I2C one-off touchpad controller based on the Cypress Semiconductor
+CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+board inside the router is named E119921.
+
+The touchpad device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: must be "dlink,dir685-touchpad"
+- reg: the I2C address of the touchpad
+- interrupts: reference to the interrupt number
+
+Example:
+
+touchpad@26 {
+ compatible = "dlink,dir685-touchpad";
+ reg = <0x26>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
