The driver has been converted to use generic device properties, so
stop referring to platform data.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
Documentation/input/rotary-encoder.rst | 85 ++++++++++++++++++----------------
1 file changed, 44 insertions(+), 41 deletions(-)
diff --git a/Documentation/input/rotary-encoder.rst b/Documentation/input/rotary-encoder.rst
index 4695bea67f9b..b07b20a295ac 100644
--- a/Documentation/input/rotary-encoder.rst
+++ b/Documentation/input/rotary-encoder.rst
@@ -81,48 +81,51 @@ Board integration
To use this driver in your system, register a platform_device with the
name 'rotary-encoder' and associate the IRQs and some specific platform
-data with it.
+data with it. Because the driver uses generic device properties, this can
+be done either via device tree, ACPI, or using static board files, like in
+example below:
-struct rotary_encoder_platform_data is declared in
-include/linux/rotary-encoder.h and needs to be filled with the number of
-steps the encoder has and can carry information about externally inverted
-signals (because of an inverting buffer or other reasons). The encoder
-can be set up to deliver input information as either an absolute or relative
-axes. For relative axes the input event returns +/-1 for each step. For
-absolute axes the position of the encoder can either roll over between zero
-and the number of steps or will clamp at the maximum and zero depending on
-the configuration.
+::
-Because GPIO to IRQ mapping is platform specific, this information must
-be given in separately to the driver. See the example below.
+ /* board support file example */
-::
+ #include <linux/input.h>
+ #include <linux/gpio/machine.h>
+ #include <linux/property.h>
+
+ #define GPIO_ROTARY_A 1
+ #define GPIO_ROTARY_B 2
+
+ static struct gpiod_lookup_table rotary_encoder_gpios = {
+ .dev_id = "rotary-encoder.0",
+ .table = {
+ GPIO_LOOKUP_IDX("gpio-0",
+ GPIO_ROTARY_A, NULL, 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-0",
+ GPIO_ROTARY_B, NULL, 1, GPIO_ACTIVE_HIGH),
+ { },
+ },
+ };
+
+ static const struct property_entry rotary_encoder_properties[] __initconst = {
+ PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
+ PROPERTY_ENTRY_INTEGER("linux,axis", u32, ABS_X),
+ PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis", u32, 0),
+ { },
+ };
+
+ static struct platform_device rotary_encoder_device = {
+ .name = "rotary-encoder",
+ .id = 0,
+ };
+
+ ...
+
+ gpiod_add_lookup_table(&rotary_encoder_gpios);
+ device_add_properties(&rotary_encoder_device, rotary_encoder_properties);
+ platform_device_register(&rotary_encoder_device);
+
+ ...
- /* board support file example */
-
- #include <linux/input.h>
- #include <linux/rotary_encoder.h>
-
- #define GPIO_ROTARY_A 1
- #define GPIO_ROTARY_B 2
-
- static struct rotary_encoder_platform_data my_rotary_encoder_info = {
- .steps = 24,
- .axis = ABS_X,
- .relative_axis = false,
- .rollover = false,
- .gpio_a = GPIO_ROTARY_A,
- .gpio_b = GPIO_ROTARY_B,
- .inverted_a = 0,
- .inverted_b = 0,
- .half_period = false,
- .wakeup_source = false,
- };
-
- static struct platform_device rotary_encoder_device = {
- .name = "rotary-encoder",
- .id = 0,
- .dev = {
- .platform_data = &my_rotary_encoder_info,
- }
- };
+Please consult device tree binding documentation to see all properties
+supported by the driver.
--
2.12.2.762.g0e3151a226-goog
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
