On Sat, Apr 01, 2017 at 11:42:05PM -0300, Mauro Carvalho Chehab wrote: > Em Sun, 2 Apr 2017 11:16:35 +1000 > Peter Hutterer <peter.hutterer@xxxxxxxxx> escreveu: > > > On Sat, Apr 01, 2017 at 03:15:54PM -0300, Mauro Carvalho Chehab wrote: > > > This file require minimum adjustments to be a valid ReST file. > > > Do it, in order to be able to parse it with Sphinx. > > > > > > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx> > > > > there's a conflict markerleft in this file, see below > > > Gah! Sorry for that. The correct patch is enclosed. > > I also updated the html for it: > http://www.infradead.org/~mchehab/kernel_docs/input/event-codes.html > > Thanks, > Mauro > > [PATCH] docs: input/event-codes: convert it to ReST format > > This file require minimum adjustments to be a valid ReST file. > Do it, in order to be able to parse it with Sphinx. > > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx> Appears to do what it should, now :) Thanks for the update Reviewed-by: Peter Hutterer <peter.hutterer@xxxxxxxxx> Cheers, Peter > > diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt > index 36ea940e5bb9..92db50954169 100644 > --- a/Documentation/input/event-codes.txt > +++ b/Documentation/input/event-codes.txt > @@ -1,3 +1,8 @@ > +================= > +Input event codes > +================= > + > + > The input protocol uses a map of types and codes to express input device values > to userspace. This document describes the types and codes and how and when they > may be used. > @@ -17,82 +22,102 @@ reports supported by a device are also provided by sysfs in > class/input/event*/device/capabilities/, and the properties of a device are > provided in class/input/event*/device/properties. > > -Event types: > +Event types > =========== > + > Event types are groupings of codes under a logical input construct. Each > type has a set of applicable codes to be used in generating events. See the > Codes section for details on valid codes for each type. > > * EV_SYN: > + > - Used as markers to separate events. Events may be separated in time or in > space, such as with the multitouch protocol. > > * EV_KEY: > + > - Used to describe state changes of keyboards, buttons, or other key-like > devices. > > * EV_REL: > + > - Used to describe relative axis value changes, e.g. moving the mouse 5 units > to the left. > > * EV_ABS: > + > - Used to describe absolute axis value changes, e.g. describing the > coordinates of a touch on a touchscreen. > > * EV_MSC: > + > - Used to describe miscellaneous input data that do not fit into other types. > > * EV_SW: > + > - Used to describe binary state input switches. > > * EV_LED: > + > - Used to turn LEDs on devices on and off. > > * EV_SND: > + > - Used to output sound to devices. > > * EV_REP: > + > - Used for autorepeating devices. > > * EV_FF: > + > - Used to send force feedback commands to an input device. > > * EV_PWR: > + > - A special type for power button and switch input. > > * EV_FF_STATUS: > + > - Used to receive force feedback device status. > > -Event codes: > +Event codes > =========== > + > Event codes define the precise type of event. > > -EV_SYN: > ----------- > +EV_SYN > +------ > + > EV_SYN event values are undefined. Their usage is defined only by when they are > sent in the evdev event stream. > > * SYN_REPORT: > + > - Used to synchronize and separate events into packets of input data changes > occurring at the same moment in time. For example, motion of a mouse may set > the REL_X and REL_Y values for one motion, then emit a SYN_REPORT. The next > motion will emit more REL_X and REL_Y values and send another SYN_REPORT. > > * SYN_CONFIG: > + > - TBD > > * SYN_MT_REPORT: > + > - Used to synchronize and separate touch events. See the > multi-touch-protocol.txt document for more information. > > * SYN_DROPPED: > + > - Used to indicate buffer overrun in the evdev client's event queue. > Client should ignore all events up to and including next SYN_REPORT > event and query the device (using EVIOCG* ioctls) to obtain its > current state. > > -EV_KEY: > ----------- > +EV_KEY > +------ > + > EV_KEY events take the form KEY_<name> or BTN_<name>. For example, KEY_A is used > to represent the 'A' key on a keyboard. When a key is depressed, an event with > the key's code is emitted with value 1. When the key is released, an event is > @@ -103,6 +128,7 @@ BTN_<name> is used for other types of momentary switch events. > A few EV_KEY codes have special meanings: > > * BTN_TOOL_<name>: > + > - These codes are used in conjunction with input trackpads, tablets, and > touchscreens. These devices may be used with fingers, pens, or other tools. > When an event occurs and a tool is used, the corresponding BTN_TOOL_<name> > @@ -112,6 +138,7 @@ A few EV_KEY codes have special meanings: > code when events are generated. > > * BTN_TOUCH: > + > BTN_TOUCH is used for touch contact. While an input tool is determined to be > within meaningful physical contact, the value of this property must be set > to 1. Meaningful physical contact may mean any contact, or it may mean > @@ -132,6 +159,7 @@ future, this distinction will be deprecated and the device properties ioctl > EVIOCGPROP, defined in linux/input.h, will be used to convey the device type. > > * BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP, BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP: > + > - These codes denote one, two, three, and four finger interaction on a > trackpad or touchscreen. For example, if the user uses two fingers and moves > them on the touchpad in an effort to scroll content on screen, > @@ -147,8 +175,9 @@ a value of 1 in the same synchronization frame. This usage is deprecated. > Note: In multitouch drivers, the input_mt_report_finger_count() function should > be used to emit these codes. Please see multi-touch-protocol.txt for details. > > -EV_REL: > ----------- > +EV_REL > +------ > + > EV_REL events describe relative changes in a property. For example, a mouse may > move to the left by a certain number of units, but its absolute position in > space is unknown. If the absolute position is known, EV_ABS codes should be used > @@ -157,17 +186,20 @@ instead of EV_REL codes. > A few EV_REL codes have special meanings: > > * REL_WHEEL, REL_HWHEEL: > + > - These codes are used for vertical and horizontal scroll wheels, > respectively. > > -EV_ABS: > ----------- > +EV_ABS > +------ > + > EV_ABS events describe absolute changes in a property. For example, a touchpad > may emit coordinates for a touch location. > > A few EV_ABS codes have special meanings: > > * ABS_DISTANCE: > + > - Used to describe the distance of a tool from an interaction surface. This > event should only be emitted while the tool is hovering, meaning in close > proximity of the device and while the value of the BTN_TOUCH code is 0. If > @@ -179,11 +211,13 @@ A few EV_ABS codes have special meanings: > hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH. > > * ABS_MT_<name>: > + > - Used to describe multitouch input events. Please see > multi-touch-protocol.txt for details. > > -EV_SW: > ----------- > +EV_SW > +----- > + > EV_SW events describe stateful binary switches. For example, the SW_LID code is > used to denote when a laptop lid is closed. > > @@ -195,14 +229,16 @@ Upon resume, if the switch state is the same as before suspend, then the input > subsystem will filter out the duplicate switch state reports. The driver does > not need to keep the state of the switch at any time. > > -EV_MSC: > ----------- > +EV_MSC > +------ > + > EV_MSC events are used for input and output events that do not fall under other > categories. > > A few EV_MSC codes have special meaning: > > * MSC_TIMESTAMP: > + > - Used to report the number of microseconds since the last reset. This event > should be coded as an uint32 value, which is allowed to wrap around with > no special consequence. It is assumed that the time difference between two > @@ -211,39 +247,46 @@ A few EV_MSC codes have special meaning: > unknown. If the device does not provide this information, the driver must > not provide it to user space. > > -EV_LED: > ----------- > +EV_LED > +------ > + > EV_LED events are used for input and output to set and query the state of > various LEDs on devices. > > -EV_REP: > ----------- > +EV_REP > +------ > + > EV_REP events are used for specifying autorepeating events. > > -EV_SND: > ----------- > +EV_SND > +------ > + > EV_SND events are used for sending sound commands to simple sound output > devices. > > -EV_FF: > ----------- > +EV_FF > +----- > + > EV_FF events are used to initialize a force feedback capable device and to cause > such device to feedback. > > -EV_PWR: > ----------- > +EV_PWR > +------ > + > EV_PWR events are a special type of event used specifically for power > management. Its usage is not well defined. To be addressed later. > > -Device properties: > +Device properties > ================= > + > Normally, userspace sets up an input device based on the data it emits, > i.e., the event types. In the case of two devices emitting the same event > types, additional information can be provided in the form of device > properties. > > -INPUT_PROP_DIRECT + INPUT_PROP_POINTER: > +INPUT_PROP_DIRECT + INPUT_PROP_POINTER > -------------------------------------- > + > The INPUT_PROP_DIRECT property indicates that device coordinates should be > directly mapped to screen coordinates (not taking into account trivial > transformations, such as scaling, flipping and rotating). Non-direct input > @@ -260,8 +303,9 @@ If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is > considered undefined and the device type should be deduced in the > traditional way, using emitted event types. > > -INPUT_PROP_BUTTONPAD: > +INPUT_PROP_BUTTONPAD > -------------------- > + > For touchpads where the button is placed beneath the surface, such that > pressing down on the pad causes a button click, this property should be > set. Common in clickpad notebooks and macbooks from 2009 and onwards. > @@ -270,8 +314,9 @@ Originally, the buttonpad property was coded into the bcm5974 driver > version field under the name integrated button. For backwards > compatibility, both methods need to be checked in userspace. > > -INPUT_PROP_SEMI_MT: > +INPUT_PROP_SEMI_MT > ------------------ > + > Some touchpads, most common between 2008 and 2011, can detect the presence > of multiple contacts without resolving the individual positions; only the > number of contacts and a rectangular shape is known. For such > @@ -285,9 +330,10 @@ gestures can normally be extracted from it. > If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT > device. > > -INPUT_PROP_TOPBUTTONPAD: > +INPUT_PROP_TOPBUTTONPAD > ----------------------- > -Some laptops, most notably the Lenovo *40 series provide a trackstick > + > +Some laptops, most notably the Lenovo 40 series provide a trackstick > device but do not have physical buttons associated with the trackstick > device. Instead, the top area of the touchpad is marked to show > visual/haptic areas for left, middle, right buttons intended to be used > @@ -299,26 +345,30 @@ The kernel does not provide button emulation for such devices but treats > them as any other INPUT_PROP_BUTTONPAD device. > > INPUT_PROP_ACCELEROMETER > -------------------------- > +------------------------ > + > Directional axes on this device (absolute and/or relative x, y, z) represent > accelerometer data. All other axes retain their meaning. A device must not mix > regular directional axes and accelerometer axes on the same event node. > > -Guidelines: > +Guidelines > ========== > + > The guidelines below ensure proper single-touch and multi-finger functionality. > For multi-touch functionality, see the multi-touch-protocol.txt document for > more information. > > -Mice: > ----------- > +Mice > +---- > + > REL_{X,Y} must be reported when the mouse moves. BTN_LEFT must be used to report > the primary button press. BTN_{MIDDLE,RIGHT,4,5,etc.} should be used to report > further buttons of the device. REL_WHEEL and REL_HWHEEL should be used to report > scroll wheel events where available. > > -Touchscreens: > ----------- > +Touchscreens > +------------ > + > ABS_{X,Y} must be reported with the location of the touch. BTN_TOUCH must be > used to report when a touch is active on the screen. > BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch > @@ -326,8 +376,9 @@ contact. BTN_TOOL_<name> events should be reported where possible. > > For new hardware, INPUT_PROP_DIRECT should be set. > > -Trackpads: > ----------- > +Trackpads > +--------- > + > Legacy trackpads that only provide relative position information must report > events like mice described above. > > @@ -338,8 +389,9 @@ be used to report the number of touches active on the trackpad. > > For new hardware, INPUT_PROP_POINTER should be set. > > -Tablets: > ----------- > +Tablets > +------- > + > BTN_TOOL_<name> events must be reported when a stylus or other tool is active on > the tablet. ABS_{X,Y} must be reported with the location of the tool. BTN_TOUCH > should be used to report when the tool is in contact with the tablet. > > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
