The driver uses a hardcoded value for the register, so the parameter set in the device tree is not actually used. Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Signed-off-by: Damien Riegel <damien.riegel@xxxxxxxxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt index 4ed467b1e402..86ce95fc6cf8 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt @@ -12,7 +12,8 @@ PROPERTIES - reg: Usage: required Value type: <prop-encoded-array> - Definition: address of vibration control register + Definition: address of vibration control register. This value is + actually ignored and hardcoded in the driver to value 0x4a EXAMPLE -- 2.12.0 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
