And here's a screenshot of the device info in Windows:
On Tue, Mar 28, 2017 at 3:13 AM, M K <m.kolesinski@xxxxxxxxx> wrote:
> Hi Johnny,
>
> Did you mean to add the {.driver_data...} to a static in i2c-hid.c, or
> in hid-multitouch.c? If so, where? After downloading the kernel
> source and building these modules, it looks to me like
> hid-multitouch.c is its own module (part of the Makefile for
> "M=drivers/hid") separate from i2c-hid ("M=drivers/hid/i2c-hid")
>
> Also, the comments in hid-multitouch.c state that definitions for
> items using MT_CLS_DEFAULT don't do anything. Finally, what device
> type should I use? The code you provided won't compile, because the
> HID_DEVICE() macro expects another argument. I presume this would be
> "HID_GROUP_MULTITOUCH" ?
>
> After trying the above, I recompiled the two modules and re-installed
> them in my kernel using modprobe. However, I could find no evidence
> that the ELAN0732 device was actually detected as an input device (cat
> /proc/bus/input/devices, and xinput both don't show anything new). I
> also tried rebooting (however, neither of these modules is in the
> standard initramfs for Arch Linux, so I don't think rebooting is
> necessary).
>
> Any other ideas?
>
> Also, here's a snippet of the DxDiag report from Windows..for this
> vendor ID, it lists 4 devices (0x2B28)...not sure if this is the same
> piece of hardware or not:
> "-------------------
> DirectInput Devices
> -------------------
> Device Name: Mouse
> Attached: 1
> Controller ID: n/a
> Vendor/Product ID: n/a
> FF Driver: n/a
>
> Device Name: Keyboard
> Attached: 1
> Controller ID: n/a
> Vendor/Product ID: n/a
> FF Driver: n/a
>
> Device Name: HIDI2C Device
> Attached: 1
> Controller ID: 0x0
> Vendor/Product ID: 0x04F3, 0x2B28
> FF Driver: n/a
>
> Device Name: HIDI2C Device
> Attached: 1
> Controller ID: 0x0
> Vendor/Product ID: 0x04F3, 0x2B28
> FF Driver: n/a
>
> Device Name: HIDI2C Device
> Attached: 1
> Controller ID: 0x0
> Vendor/Product ID: 0x04F3, 0x2B28
> FF Driver: n/a
>
> Device Name: HIDI2C Device
> Attached: 1
> Controller ID: 0x0
> Vendor/Product ID: 0x04F3, 0x2B28
> FF Driver: n/a
>
> Device Name: HP Wireless Button Driver
> Attached: 1
> Controller ID: 0x0
> Vendor/Product ID: 0x0001, 0x0001
> FF Driver: n/a
>
> Device Name: ST_SENSOR_HUB
> Attached: 1
> Controller ID: 0x0
> Vendor/Product ID: 0x0483, 0x91D1
> FF Driver: n/a
>
> Poll w/ Interrupt: No
>
> -----------"
>
>
>
>
> Thanks,
>
> MK
>
>
> On Mon, Mar 27, 2017 at 10:06 PM, Johnny.Chuang
> <johnny.chuang@xxxxxxxxxx> wrote:
>> Hi Dmitry,
>>
>> Sorry for late response.
>>
>> ELAN0732 is hid over i2c touch screen device.
>> There is a compatible linux inbox driver which is drivers/hid/i2c-hid/i2c-hid.c.
>> Please make i2c-hid.c as build-in driver or module.
>>
>> And please also add VID/PID at hid-ids.h and hid-multitouch.c
>> drivers/hid/hid-ids.h
>> #define USB_VENDOR_ID_ELAN 0x04f3
>> #define USB_DEVICE_ID_ELAN_A 0x0732
>> #define USB_DEVICE_ID_ELAN_B 0x000b
>> drivers/hid/hid-multitouch.c
>> /* Elan i2c-hid TouchSystems panel */
>> { .driver_data = MT_CLS_DEFAULT,
>> HID_DEVICE(BUS_I2C, USB_VENDOR_ID_ELAN,
>> USB_DEVICE_ID_ELAN_A) },
>>
>> Many thanks,
>> Johnny
>> -----Original Message-----
>> From: 廖崇榮 [mailto:kt.liao@xxxxxxxxxx]
>> Sent: Tuesday, March 21, 2017 1:55 PM
>> To: 'Dmitry Torokhov'; 'M K'
>> Cc: linux-input@xxxxxxxxxxxxxxx; 'ELAN 劉嘉駿'; 'Johnny.Chuang'
>> Subject: RE: ELAN0732 I2C Touchscreen Driver
>>
>> Add Johnny who handle ELAN touchscreen in loop.
>>
>> -----Original Message-----
>> From: Dmitry Torokhov [mailto:dmitry.torokhov@xxxxxxxxx]
>> Sent: Tuesday, March 21, 2017 12:45 PM
>> To: M K; 廖崇榮
>> Cc: linux-input@xxxxxxxxxxxxxxx; ELAN 劉嘉駿
>> Subject: Re: ELAN0732 I2C Touchscreen Driver
>>
>> On Sun, Mar 19, 2017 at 11:26 PM, M K <m.kolesinski@xxxxxxxxx> wrote:
>>> Is there a compatible driver for this device? I've tried loading
>>> various modules with no success (elants_i2c, hid_multitouch, etc.).
>>>
>>> The device shows up under /sys/bus/i2c/devices/i2c-ELAN0732:00
>>
>> You would need to add "ELAN0732" to elants_i2c_id table for elants_i2c to load and bind to the device.
>>
>>>
>>> However, xinput does not list it at all.
>>>
>>> This is an HP m6-ar004dx laptop (Envy x360) with touchscreen display,
>>> and AMD FX-9800P processor.
>>>
>>> Scott Liu suggested I try posting here.
>>
>> Hmm, I'd expect Scott to know if elants_i2c could theoretically drive this device. KT, do you know by chance?
>> Hi Johnny,
>> Could you help to check this TS issue
>> Thanks.
>>
>> --
>> Dmitry
>>
Attachment:
elan_0732_info.png
Description: PNG image
