On Mon, Feb 20, 2017 at 09:37:43AM +0100, Heiko Schocher wrote:
> From: Guan Ben <ben.guan@xxxxxxxxxxxx>
>
> extend the pwm-beeper driver to support customized frequency
> for SND_BELL from device tree.
>
> Signed-off-by: Guan Ben <ben.guan@xxxxxxxxxxxx>
> Signed-off-by: Mark Jonas <mark.jonas@xxxxxxxxxxxx>
> [hs@xxxxxxx: adapted to 4.10-rc7]
> Signed-off-by: Heiko Schocher <hs@xxxxxxx>
>
> ---
>
> Changes in v2:
> - add comment from Rob Herring:
> rename property name "bell-frequency" to "beeper-hz"
> - add comment from Dmitry Torokhov:
> use device_property_read_u32() instead of of_property_read_u32()
> - rebased against c470abd4fde40ea6a0846a2beab642a578c0b8cd
> Linux 4.10
>
> .../devicetree/bindings/input/pwm-beeper.txt | 3 ++
Acked-by: Rob Herring <robh@xxxxxxxxxx>
A few comments on the driver though.
> drivers/input/misc/pwm-beeper.c | 36 ++++++++++++++++------
> 2 files changed, 30 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
> index be332ae..4e4e128 100644
> --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
> +++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
> @@ -5,3 +5,6 @@ Registers a PWM device as beeper.
> Required properties:
> - compatible: should be "pwm-beeper"
> - pwms: phandle to the physical PWM device
> +
> +optional properties:
> +- beeper-hz: bell frequency in Hz
> diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
> index 5f9655d..5ea6fda 100644
> --- a/drivers/input/misc/pwm-beeper.c
> +++ b/drivers/input/misc/pwm-beeper.c
> @@ -27,6 +27,7 @@ struct pwm_beeper {
> struct pwm_device *pwm;
> struct work_struct work;
> unsigned long period;
> + unsigned int bell_frequency;
> };
>
> #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
> @@ -58,20 +59,17 @@ static int pwm_beeper_event(struct input_dev *input,
> if (type != EV_SND || value < 0)
> return -EINVAL;
>
> - switch (code) {
> - case SND_BELL:
> - value = value ? 1000 : 0;
> - break;
> - case SND_TONE:
> - break;
> - default:
> + if (code != SND_BELL && code != SND_TONE)
> return -EINVAL;
> - }
>
> if (value == 0)
> beeper->period = 0;
> - else
> + else {
> + if (code == SND_BELL)
> + value = beeper->bell_frequency;
> +
> beeper->period = HZ_TO_NANOSECONDS(value);
> + }
>
> schedule_work(&beeper->work);
>
> @@ -93,6 +91,25 @@ static void pwm_beeper_close(struct input_dev *input)
> pwm_beeper_stop(beeper);
> }
>
> +static void pwm_beeper_init_bell_frequency(struct device *dev,
> + struct pwm_beeper *beeper)
> +{
> + struct device_node *node;
> + unsigned int bell_frequency = 1000;
> + int err;
> +
> + if (IS_ENABLED(CONFIG_OF)) {
You don't really need this. There should be an empty version of the
function.
> + node = dev->of_node;
You don't need this line.
> + err = device_property_read_u32(dev, "beeper-hz",
> + &bell_frequency);
> + if (err < 0)
> + dev_dbg(dev, "Failed to read beeper-hz, using default: %u Hz\n",
> + bell_frequency);
> + }
> +
> + beeper->bell_frequency = bell_frequency;
> +}
> +
> static int pwm_beeper_probe(struct platform_device *pdev)
> {
> unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
> @@ -122,6 +139,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
> pwm_apply_args(beeper->pwm);
>
> INIT_WORK(&beeper->work, pwm_beeper_work);
> + pwm_beeper_init_bell_frequency(&pdev->dev, beeper);
>
> beeper->input = input_allocate_device();
> if (!beeper->input) {
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
