From: Douglas Anderson <dianders@xxxxxxxxxxxx>
Add the defines for the new buttons and switches connected to the CrosEC.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---
include/linux/mfd/cros_ec_commands.h | 73 +++++++++++++++++++++++++++++++++++-
1 file changed, 71 insertions(+), 2 deletions(-)
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 23619b2..a01dde4 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1865,18 +1865,69 @@ struct ec_response_tmp006_get_raw {
*
* Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for
* expected response size.
+ *
+ * NOTE: This has been superseded by EC_CMD_MKBP_GET_NEXT_EVENT. If you wish
+ * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type
+ * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX.
*/
#define EC_CMD_MKBP_STATE 0x60
-/* Provide information about the matrix : number of rows and columns */
+/*
+ * Provide information about various MKBP things. See enum ec_mkbp_info_type.
+ */
#define EC_CMD_MKBP_INFO 0x61
struct ec_response_mkbp_info {
uint32_t rows;
uint32_t cols;
- uint8_t switches;
+ /* Formerly "switches", which was 0. */
+ uint8_t reserved;
} __packed;
+struct ec_params_mkbp_info {
+ uint8_t info_type;
+ uint8_t event_type;
+} __packed;
+
+enum ec_mkbp_info_type {
+ /*
+ * Info about the keyboard matrix: number of rows and columns.
+ *
+ * Returns struct ec_response_mkbp_info.
+ */
+ EC_MKBP_INFO_KBD = 0,
+
+ /*
+ * For buttons and switches, info about which specifically are
+ * supported. event_type must be set to one of the values in enum
+ * ec_mkbp_event.
+ *
+ * For EC_MKBP_EVENT_BUTTON and EC_MKBP_EVENT_SWITCH, returns a 4 byte
+ * bitmask indicating which buttons or switches are present. See the
+ * bit inidices below.
+ */
+ EC_MKBP_INFO_SUPPORTED = 1,
+
+ /*
+ * Instantaneous state of buttons and switches.
+ *
+ * event_type must be set to one of the values in enum ec_mkbp_event.
+ *
+ * For EC_MKBP_EVENT_KEY_MATRIX, returns uint8_t key_matrix[13]
+ * indicating the current state of the keyboard matrix.
+ *
+ * For EC_MKBP_EVENT_HOST_EVENT, return uint32_t host_event, the raw
+ * event state.
+ *
+ * For EC_MKBP_EVENT_BUTTON, returns uint32_t buttons, indicating the
+ * state of supported buttons.
+ *
+ * For EC_MKBP_EVENT_SWITCH, returns uint32_t switches, indicating the
+ * state of supported switches.
+ */
+ EC_MKBP_INFO_CURRENT = 2,
+};
+
/* Simulate key press */
#define EC_CMD_MKBP_SIMULATE_KEY 0x62
@@ -2009,6 +2060,12 @@ enum ec_mkbp_event {
/* New Sensor FIFO data. The event data is fifo_info structure. */
EC_MKBP_EVENT_SENSOR_FIFO = 2,
+ /* The state of the non-matrixed buttons have changed. */
+ EC_MKBP_EVENT_BUTTON = 3,
+
+ /* The state of the switches have changed. */
+ EC_MKBP_EVENT_SWITCH = 4,
+
/* Number of MKBP events */
EC_MKBP_EVENT_COUNT,
};
@@ -2018,6 +2075,9 @@ union ec_response_get_next_data {
/* Unaligned */
uint32_t host_event;
+
+ uint32_t buttons;
+ uint32_t switches;
} __packed;
struct ec_response_get_next_event {
@@ -2026,6 +2086,15 @@ struct ec_response_get_next_event {
union ec_response_get_next_data data;
} __packed;
+/* Bit indices for buttons and switches.*/
+/* Buttons */
+#define EC_MKBP_POWER_BUTTON 0
+#define EC_MKBP_VOL_UP 1
+#define EC_MKBP_VOL_DOWN 2
+
+/* Switches */
+#define EC_MKBP_LID_OPEN 0
+
/*****************************************************************************/
/* Temperature sensor commands */
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
