This patch adds the documentation for the devicetree bindings to set
the volume levels.
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxx>
---
Changes in v3:
- change description of volume-levels to be used for linear levels
.../devicetree/bindings/input/pwm-beeper.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
index be332ae..496b68f 100644
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -5,3 +5,23 @@ Registers a PWM device as beeper.
Required properties:
- compatible: should be "pwm-beeper"
- pwms: phandle to the physical PWM device
+
+Optional properties:
+- volume-levels: Array of PWM duty cycle values that correspond to
+ linear volume levels. These need to be in the range of 0 to 500,
+ while 0 means 0% duty cycle (mute) and 500 means 50% duty cycle
+ (max volume).
+ Please note that the actual volume of most beepers is highly
+ non-linear, which means that low volume levels are probably somewhere
+ in the range of 1 to 30 (0.1-3% duty cycle).
+- default-volume-level: the default volume level (index into the
+ array defined by the "volume-levels" property)
+
+Example:
+
+ pwm-beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm4 0 5000>;
+ volume-levels = <0 8 20 40 500>;
+ default-volume-level = <4>;
+ };
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
