Re: [PATCH v6 2/3] input: tm2-touchkey: Add touchkey driver support for TM2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Dmitry Torokhov,

On Sat, Jan 14, 2017 at 11:11:10PM -0800, Dmitry Torokhov wrote:
> Hi Jaechul,
> 
> On Mon, Jan 09, 2017 at 04:22:14PM +0900, Jaechul Lee wrote:
> > +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
> > +{
> > +	struct tm2_touchkey_data *touchkey = devid;
> > +	u32 data;
> > +
> > +	data = i2c_smbus_read_byte_data(touchkey->client,
> > +					TM2_TOUCHKEY_KEYCODE_REG);
> > +
> > +	if (data < 0) {
> 
> You declared data as u32 so it will never be negative.

Yes, it won't be negative.

> 
> > +		dev_err(&touchkey->client->dev, "Failed to read i2c data\n");
> > +		return IRQ_HANDLED;
> > +	}
> > +
> > +	touchkey->keycode_type = data & TM2_TOUCHKEY_BIT_KEYCODE;
> > +	touchkey->pressed = !(data & TM2_TOUCHKEY_BIT_PRESS_EV);
> 
> There is no need to store this in touchkey structure as you are not
> going to use it past this function.

I agree with you. it doesn't need to store variables in touchkey structure.

> 
> Does the version of the patch below work for you?

I found that the condition is inverted.
if data & TM2_TOUCHKEY_BIT_PRESS_EV is true, it means touchkey is released.

it should be changed like this.

	if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
		input_report_key(touchkey->input_dev, KEY_PHONE, 0);
		input_report_key(touchkey->input_dev, KEY_BACK, 0);
	} else {
		input_report_key(touchkey->input_dev, key, 1);
	}

I will prepare for patch v7 based on your modifications.
Thank you very much for your reviews.

Best Regards,
Jaechul

> 
> Thanks.
> 
> -- 
> Dmitry
> 
> 
> Input: tm2-touchkey - add touchkey driver support for TM2
> 
> From: Jaechul Lee <jcsing.lee@xxxxxxxxxxx>
> 
> This patch adds support for the TM2 touch key and led functionality.
> 
> The driver interfaces with userspace through an input device and
> reports KEY_PHONE and KEY_BACK event types. LED brightness can be
> controlled by "/sys/class/leds/tm2-touchkey/brightness".
> 
> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> Signed-off-by: Jaechul Lee <jcsing.lee@xxxxxxxxxxx>
> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
> Acked-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Patchwork-Id: 9504149
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
>  drivers/input/keyboard/Kconfig        |   11 +
>  drivers/input/keyboard/Makefile       |    1 
>  drivers/input/keyboard/tm2-touchkey.c |  286 +++++++++++++++++++++++++++++++++
>  3 files changed, 298 insertions(+)
>  create mode 100644 drivers/input/keyboard/tm2-touchkey.c
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index cbd75cf44739..97acd6524ad7 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -666,6 +666,17 @@ config KEYBOARD_TC3589X
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called tc3589x-keypad.
>  
> +config KEYBOARD_TM2_TOUCHKEY
> +	tristate "TM2 touchkey support"
> +	depends on I2C
> +	depends on LEDS_CLASS
> +	help
> +	  Say Y here to enable device driver for tm2-touchkey with
> +	  LED control for the Exynos5433 TM2 board.
> +
> +	  To compile this driver as a module, choose M here.
> +	  module will be called tm2-touchkey.
> +
>  config KEYBOARD_TWL4030
>  	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
>  	depends on TWL4030_CORE
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index d9f4cfcf3410..7d9acff819a7 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC)	+= sun4i-lradc-keys.o
>  obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
>  obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
>  obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o
> +obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY)	+= tm2-touchkey.o
>  obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
>  obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
>  obj-$(CONFIG_KEYBOARD_W90P910)		+= w90p910_keypad.o
> diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
> new file mode 100644
> index 000000000000..79bc2d2bd4b9
> --- /dev/null
> +++ b/drivers/input/keyboard/tm2-touchkey.c
> @@ -0,0 +1,286 @@
> +/*
> + * TM2 touchkey device driver
> + *
> + * Copyright 2005 Phil Blundell
> + * Copyright 2016 Samsung Electronics Co., Ltd.
> + *
> + * Author: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> + * Author: Jaechul Lee <jcsing.lee@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/pm.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define TM2_TOUCHKEY_DEV_NAME		"tm2-touchkey"
> +#define TM2_TOUCHKEY_KEYCODE_REG	0x03
> +#define TM2_TOUCHKEY_BASE_REG		0x00
> +#define TM2_TOUCHKEY_CMD_LED_ON		0x10
> +#define TM2_TOUCHKEY_CMD_LED_OFF	0x20
> +#define TM2_TOUCHKEY_BIT_PRESS_EV	BIT(3)
> +#define TM2_TOUCHKEY_BIT_KEYCODE	GENMASK(2, 0)
> +#define TM2_TOUCHKEY_LED_VOLTAGE_MIN	2500000
> +#define TM2_TOUCHKEY_LED_VOLTAGE_MAX	3300000
> +
> +enum {
> +	TM2_TOUCHKEY_KEY_MENU = 0x1,
> +	TM2_TOUCHKEY_KEY_BACK,
> +};
> +
> +struct tm2_touchkey_data {
> +	struct i2c_client *client;
> +	struct input_dev *input_dev;
> +	struct led_classdev led_dev;
> +	struct regulator *vdd;
> +	struct regulator_bulk_data regulators[2];
> +};
> +
> +static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
> +					    enum led_brightness brightness)
> +{
> +	struct tm2_touchkey_data *touchkey =
> +		container_of(led_dev, struct tm2_touchkey_data, led_dev);
> +	u32 volt;
> +	u8 data;
> +
> +	if (brightness == LED_OFF) {
> +		volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
> +		data = TM2_TOUCHKEY_CMD_LED_OFF;
> +	} else {
> +		volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
> +		data = TM2_TOUCHKEY_CMD_LED_ON;
> +	}
> +
> +	regulator_set_voltage(touchkey->vdd, volt, volt);
> +	i2c_smbus_write_byte_data(touchkey->client,
> +				  TM2_TOUCHKEY_BASE_REG, data);
> +}
> +
> +static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
> +{
> +	int error;
> +
> +	error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
> +				      touchkey->regulators);
> +	if (error)
> +		return error;
> +
> +	/* waiting for device initialization, at least 150ms */
> +	msleep(150);
> +
> +	return 0;
> +}
> +
> +static void tm2_touchkey_power_disable(void *data)
> +{
> +	struct tm2_touchkey_data *touchkey = data;
> +
> +	regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
> +			       touchkey->regulators);
> +}
> +
> +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
> +{
> +	struct tm2_touchkey_data *touchkey = devid;
> +	int data;
> +	int key;
> +
> +	data = i2c_smbus_read_byte_data(touchkey->client,
> +					TM2_TOUCHKEY_KEYCODE_REG);
> +	if (data < 0) {
> +		dev_err(&touchkey->client->dev,
> +			"failed to read i2c data: %d\n", data);
> +		goto out;
> +	}
> +
> +	switch (data & TM2_TOUCHKEY_BIT_KEYCODE) {
> +	case TM2_TOUCHKEY_KEY_MENU:
> +		key = KEY_PHONE;
> +		break;
> +
> +	case TM2_TOUCHKEY_KEY_BACK:
> +		key = KEY_BACK;
> +		break;
> +
> +	default:
> +		dev_warn(&touchkey->client->dev,
> +			 "unhandled keycode, data %#02x\n", data);
> +		goto out;
> +	}
> +
> +	if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
> +		input_report_key(touchkey->input_dev, key, 1);
> +	} else {
> +		input_report_key(touchkey->input_dev, KEY_PHONE, 0);
> +		input_report_key(touchkey->input_dev, KEY_BACK, 0);
> +	}
> +
> +	input_sync(touchkey->input_dev);
> +
> +out:
> +	return IRQ_HANDLED;
> +}
> +
> +static int tm2_touchkey_probe(struct i2c_client *client,
> +			      const struct i2c_device_id *id)
> +{
> +	struct tm2_touchkey_data *touchkey;
> +	int error;
> +
> +	if (!i2c_check_functionality(client->adapter,
> +			I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
> +		dev_err(&client->dev, "incompatible I2C adapter\n");
> +		return -EIO;
> +	}
> +
> +	touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL);
> +	if (!touchkey)
> +		return -ENOMEM;
> +
> +	touchkey->client = client;
> +	i2c_set_clientdata(client, touchkey);
> +
> +	touchkey->regulators[0].supply = "vcc";
> +	touchkey->regulators[1].supply = "vdd";
> +	error = devm_regulator_bulk_get(&client->dev,
> +					ARRAY_SIZE(touchkey->regulators),
> +					touchkey->regulators);
> +	if (error) {
> +		dev_err(&client->dev, "failed to get regulators: %d\n", error);
> +		return error;
> +	}
> +
> +	/* Save VDD for easy access */
> +	touchkey->vdd = touchkey->regulators[1].consumer;
> +
> +	error = tm2_touchkey_power_enable(touchkey);
> +	if (error) {
> +		dev_err(&client->dev, "failed to power up device: %d\n", error);
> +		return error;
> +	}
> +
> +	error = devm_add_action_or_reset(&client->dev,
> +					 tm2_touchkey_power_disable, touchkey);
> +	if (error) {
> +		dev_err(&client->dev,
> +			"failed to install poweroff handler: %d\n", error);
> +		return error;
> +	}
> +
> +	/* input device */
> +	touchkey->input_dev = devm_input_allocate_device(&client->dev);
> +	if (!touchkey->input_dev) {
> +		dev_err(&client->dev, "failed to allocate input device\n");
> +		return -ENOMEM;
> +	}
> +
> +	touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
> +	touchkey->input_dev->id.bustype = BUS_I2C;
> +
> +	input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
> +	input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
> +
> +	input_set_drvdata(touchkey->input_dev, touchkey);
> +
> +	error = input_register_device(touchkey->input_dev);
> +	if (error) {
> +		dev_err(&client->dev,
> +			"failed to register input device: %d\n", error);
> +		return error;
> +	}
> +
> +	error = devm_request_threaded_irq(&client->dev, client->irq,
> +					  NULL, tm2_touchkey_irq_handler,
> +					  IRQF_ONESHOT,
> +					  TM2_TOUCHKEY_DEV_NAME, touchkey);
> +	if (error) {
> +		dev_err(&client->dev,
> +			"failed to request threaded irq: %d\n", error);
> +		return error;
> +	}
> +
> +	/* led device */
> +	touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
> +	touchkey->led_dev.brightness = LED_FULL;
> +	touchkey->led_dev.max_brightness = LED_FULL;
> +	touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
> +
> +	error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
> +	if (error) {
> +		dev_err(&client->dev,
> +			"failed to register touchkey led: %d\n", error);
> +		return error;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused tm2_touchkey_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
> +
> +	disable_irq(client->irq);
> +	tm2_touchkey_power_disable(touchkey);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused tm2_touchkey_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
> +	int ret;
> +
> +	enable_irq(client->irq);
> +
> +	ret = tm2_touchkey_power_enable(touchkey);
> +	if (ret)
> +		dev_err(dev, "failed to enable power: %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops,
> +			 tm2_touchkey_suspend, tm2_touchkey_resume);
> +
> +static const struct i2c_device_id tm2_touchkey_id_table[] = {
> +	{ TM2_TOUCHKEY_DEV_NAME, 0 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
> +
> +static const struct of_device_id tm2_touchkey_of_match[] = {
> +	{ .compatible = "cypress,tm2-touchkey", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);
> +
> +static struct i2c_driver tm2_touchkey_driver = {
> +	.driver = {
> +		.name = TM2_TOUCHKEY_DEV_NAME,
> +		.pm = &tm2_touchkey_pm_ops,
> +		.of_match_table = of_match_ptr(tm2_touchkey_of_match),
> +	},
> +	.probe = tm2_touchkey_probe,
> +	.id_table = tm2_touchkey_id_table,
> +};
> +module_i2c_driver(tm2_touchkey_driver);
> +
> +MODULE_AUTHOR("Beomho Seo <beomho.seo@xxxxxxxxxxx>");
> +MODULE_AUTHOR("Jaechul Lee <jcsing.lee@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Samsung touchkey driver");
> +MODULE_LICENSE("GPL v2");
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux