Hi Chanwoo,
> >>> + touchkey@20 {
> >>> + compatible = "samsung,tm2-touchkey";
> >>> + reg = <0x20>;
> >>> + interrupt-parent = <&gpa3>;
> >>> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> >>> + vcc-supply = <&ldo32_reg>;
> >>> + vdd-supply = <&ldo33_reg>;
> >>> + };
> >>> +};
> >>> +
> >>> &ldo31_reg {
> >>> regulator-name = "TSP_VDD_1.85V_AP";
> >>> regulator-min-microvolt = <1850000>;
>
> I repiled the touchkey driver against compatible name.
> Usually, when developing the device driver, we use the specific h/w name
> but in this patch, the touckey dt node uses the h/w board name instead of
> original touckhey name.
this should be a device specifically done for the tm2 and we are
not sure who is the manufacturer of the device. In order to not
assign the device to the wrong manufacturer, we preferred calling
it Samsung as it is in a Samsung device.
Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
