Hi Dmitry, On Mon, Dec 12, 2016 at 4:45 PM, Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> wrote: > > Hi Ping, > > On Mon, Dec 12, 2016 at 03:46:25PM -0800, Ping Cheng wrote: > > Wacom Cintiq Pro [1] is a series of display tablets. They support > > 5 touch keys on the tablet. Those keys represent specific functions. > > They turn display off; bring up OSD; bring up On Screen Keyboard; > > bring up desktop control panel; and turn touch on/off. > > > > The most left touch key, that turns display on/off, is controlled by > > firmware. When the display is off, the mode is on. Otherwise, the > > mode is off. So, it works like a switch. That's why we introduced a > > new switch: SW_INDIRECT. > > This seems looks notification of already performed action, not input > event that requires handling. That's a good point. I'll think about it and do some more testing to see if we have a solution or not. Basically, we need to tell userland if it is a PROP_DIRECT device or not. With the same product ID, it is hard for libinput to distinguish the device between absolute and relative touch, without an event from kernel. > > Is there a better way to communicate this > fact to the kernel and user? > > > > > Other four touch keys are true software keys. We use the existing > > KEY_BUTTONCONFIG and KEY_CONTROLPANEL for OSD and control panel. But, > > we have to request two new keys: KEY_ONSCREEN_KEYBOARD > > Is there existing HID usage for this? No, I didn't find anything for ONSCREEN_KEYBOARD in the defines. tbh, I was surprised too. > > > and KEY_MUTE_DEVICE > > since none of the existing keys support those two actions. > > Hm, so it matches SW_MUTE_DEVICE. Is the action carried in software or > firmware (on device)? Will be implemented in software/userland. The key only reports an input event, which represents if it is pressed or released. However, there is a LED image to indicate each key's function. The images are static. That is, they do not change once the tablet is powered up (refer to the link for details). Thank you for your comments, Ping > > > > > > [1] http://www.wacom.com/en-us/products/pen-displays/wacom-cintiq-pro > > > > Signed-off-by: Ping Cheng <ping.cheng@xxxxxxxxx> > > --- > > drivers/hid/wacom_wac.c | 20 ++++++++++++++++++++ > > drivers/hid/wacom_wac.h | 5 +++++ > > include/linux/mod_devicetable.h | 2 +- > > include/uapi/linux/input-event-codes.h | 6 +++++- > > 4 files changed, 31 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c > > index b1a9a3c..f47be36 100644 > > --- a/drivers/hid/wacom_wac.c > > +++ b/drivers/hid/wacom_wac.c > > @@ -1578,6 +1578,26 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev, > > wacom_map_usage(input, usage, field, EV_ABS, ABS_WHEEL, 0); > > features->device_type |= WACOM_DEVICETYPE_PAD; > > break; > > + case WACOM_HID_WD_INDIRECT: > > + wacom_map_usage(input, usage, field, EV_SW, SW_INDIRECT, 0); > > + features->device_type |= WACOM_DEVICETYPE_PAD; > > + break; > > + case WACOM_HID_WD_BUTTONCONFIG: > > + wacom_map_usage(input, usage, field, EV_KEY, KEY_BUTTONCONFIG, 0); > > + features->device_type |= WACOM_DEVICETYPE_PAD; > > + break; > > + case WACOM_HID_WD_ONSCREEN_KEYBOARD: > > + wacom_map_usage(input, usage, field, EV_KEY, KEY_ONSCREEN_KEYBOARD, 0); > > + features->device_type |= WACOM_DEVICETYPE_PAD; > > + break; > > + case WACOM_HID_WD_CONTROLPANEL: > > + wacom_map_usage(input, usage, field, EV_KEY, KEY_CONTROLPANEL, 0); > > + features->device_type |= WACOM_DEVICETYPE_PAD; > > + break; > > + case WACOM_HID_WD_MUTE_DEVICE: > > + wacom_map_usage(input, usage, field, EV_KEY, KEY_MUTE_DEVICE, 0); > > + features->device_type |= WACOM_DEVICETYPE_PAD; > > + break; > > } > > > > switch (equivalent_usage & 0xfffffff0) { > > diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h > > index fb0e50a..a96184f 100644 > > --- a/drivers/hid/wacom_wac.h > > +++ b/drivers/hid/wacom_wac.h > > @@ -105,6 +105,11 @@ > > #define WACOM_HID_WD_ACCELEROMETER_Z (WACOM_HID_UP_WACOMDIGITIZER | 0x0403) > > #define WACOM_HID_WD_BATTERY_CHARGING (WACOM_HID_UP_WACOMDIGITIZER | 0x0404) > > #define WACOM_HID_WD_BATTERY_LEVEL (WACOM_HID_UP_WACOMDIGITIZER | 0x043b) > > +#define WACOM_HID_WD_INDIRECT (WACOM_HID_UP_WACOMDIGITIZER | 0x0980) > > +#define WACOM_HID_WD_MUTE_DEVICE (WACOM_HID_UP_WACOMDIGITIZER | 0x0981) > > +#define WACOM_HID_WD_CONTROLPANEL (WACOM_HID_UP_WACOMDIGITIZER | 0x0982) > > +#define WACOM_HID_WD_ONSCREEN_KEYBOARD (WACOM_HID_UP_WACOMDIGITIZER | 0x0983) > > +#define WACOM_HID_WD_BUTTONCONFIG (WACOM_HID_UP_WACOMDIGITIZER | 0x0986) > > #define WACOM_HID_WD_EXPRESSKEY00 (WACOM_HID_UP_WACOMDIGITIZER | 0x0910) > > #define WACOM_HID_WD_EXPRESSKEYCAP00 (WACOM_HID_UP_WACOMDIGITIZER | 0x0950) > > #define WACOM_HID_WD_BUTTONHOME (WACOM_HID_UP_WACOMDIGITIZER | 0x0990) > > diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h > > index ed84c07..342ddd6 100644 > > --- a/include/linux/mod_devicetable.h > > +++ b/include/linux/mod_devicetable.h > > @@ -291,7 +291,7 @@ struct pcmcia_device_id { > > #define INPUT_DEVICE_ID_LED_MAX 0x0f > > #define INPUT_DEVICE_ID_SND_MAX 0x07 > > #define INPUT_DEVICE_ID_FF_MAX 0x7f > > -#define INPUT_DEVICE_ID_SW_MAX 0x0f > > +#define INPUT_DEVICE_ID_SW_MAX 0x1f > > > > #define INPUT_DEVICE_ID_MATCH_BUS 1 > > #define INPUT_DEVICE_ID_MATCH_VENDOR 2 > > diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h > > index d6d071f..c9633c8 100644 > > --- a/include/uapi/linux/input-event-codes.h > > +++ b/include/uapi/linux/input-event-codes.h > > @@ -641,6 +641,9 @@ > > * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.) > > */ > > #define KEY_DATA 0x275 > > +/* same as SW_MUTE_DEVICE but triggered by a key */ > > +#define KEY_MUTE_DEVICE 0x278 /* set = device disabled */ > > +#define KEY_ONSCREEN_KEYBOARD 0x279 > > > > #define BTN_TRIGGER_HAPPY 0x2c0 > > #define BTN_TRIGGER_HAPPY1 0x2c0 > > @@ -781,7 +784,8 @@ > > #define SW_LINEIN_INSERT 0x0d /* set = inserted */ > > #define SW_MUTE_DEVICE 0x0e /* set = device disabled */ > > #define SW_PEN_INSERTED 0x0f /* set = pen inserted */ > > -#define SW_MAX 0x0f > > +#define SW_INDIRECT 0x10 /* set = not a direct input device */ > > +#define SW_MAX 0x1f > > #define SW_CNT (SW_MAX+1) > > > > /* > > -- > > 2.7.4 > > > > -- > Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
