Re: [PATCH] HID: usbhid: quirk for MechanicalEagle Z-77 keyboard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



By the way, I also did some research on the internet and apparently
many gaming/mechanical keyboards require similar quirks:

https://unix.stackexchange.com/questions/280564/usb-submit-urbctrl-failed-1-corsair-k65-rgb-keyboard/280574#280574

This one concerns the same chip as in my keyboard:

https://askubuntu.com/questions/811162/keyboard-not-working-after-waking-from-suspend-sleep/846019

With usbhid.quirks=0x04D9:0xA0CD:0x20000408 added to GRUB_CMDLINE_LINUX
the keyboard works fine also on unpatched kernels.

Cheers,
Vladyslav




Am 05.12.2016 um 22:56 schrieb Vladyslav Shtabovenko:
Hi,

sorry for the late reply. I prefer to test things before submitting
them here and compiling the kernel takes more than one hour on
my machine...

It sounds very weird, but if I remove the drivers/hid/hid-holtek-kbd.c
hunk and leave the other quirks, then the keyboard does not work at all:
It just does not recognized, so I cannot type anything. Does this make
any sense?

Unless it is some sort of anomaly on Fedora's 4.8.10-100 kernel, it
seems that for some reason (that I don't understand) one has to declare
the keyboard in hid-holtek-kbd, although it is then controlled by usbhid.

Cheers,
Vladyslav



Am 01.12.2016 um 15:23 schrieb Benjamin Tissoires:
On Nov 30 2016 or thereabouts, Vladyslav Shtabovenko wrote:
Hi,

my MechanicalEagle Z-77 keyboard that identifies itself as

Bus 003 Device 005: ID 04d9:a0cd Holtek Semiconductor, Inc.

has troubles getting recognized after standby. My machine is
a Thinkpad X230 in an Ultrabase docking station and everytime
the laptop wakes up from standby, the keyboard is not working
and I have to reconnect it several times until I can type again.

The problem is identical to the one described here:

http://lkml.iu.edu/hypermail/linux/kernel/1407.1/04532.html

I used the same solution as the author, i.e. added quirks for
the specific ID of the keyboard and the issues went away. Tested
this for more than three weeks with no problems or side effects
whatsoever.

Initially I sent the patch directly to Benjamin Tissoires and Jiri
Kosina.
Benjamin asked me to add the keyboard to hid_have_special_driver in
hid-core.c, to ensure that it is handled by hid-holtek instead of
hid-generic.

However, after doing so, it turned out that with
hid-holtek I obtain the same buggy behavior as before. The only
difference
was that the keyboard was sometimes recognized and sometimes not, so
it was
a bit like Russian roulette. I also noticed that the "original"
Holtek-patch
by Wangzhao Cai did not contain this addition to
hid_have_special_driver.

For me, hid-generic + quirks from the attached patch actually work
better
with my Holtek-based keyboard than hid-holtek with the same quirks.

Please find my patch attached. This is the one without the addition to
hid_have_special_driver, i.e. it fixes the problem with the keyboard
being
unrecognized after standby in 100% of cases.

Hi,

you probably also need to remove the drivers/hid/hid-holtek-kbd.c hunk
if you prefer having hid-generic hanlding your keyboard.

Cheers,
Benjamin



Cheers,
Vladyslav


From 29dec1f11e53eb87adedad7b2a7c7559ea290e46 Mon Sep 17 00:00:00 2001
From: Vladyslav Shtabovenko <dev@xxxxxxxxxxxxxxxxxxxxxxx>
Date: Sat, 26 Nov 2016 17:01:38 +0100
Subject: [PATCH] HID: usbhid: quirk for MechanicalEagle Z-77 keyboard

Hello,

my MechanicalEagle Z-77 keyboard that identifies itself as

Bus 003 Device 005: ID 04d9:a0cd Holtek Semiconductor, Inc.

has troubles getting recognized after standby. My machine is
a Thinkpad X230 in an Ultrabase docking station and everytime
the laptop wakes up from standby, the keyboard is not working
and I have to reconnect it several times until I can type again.

The problem is identical to the one described here:

http://lkml.iu.edu/hypermail/linux/kernel/1407.1/04532.html

I used the same solution as the author, i.e. added quirks for
the specific ID of the keyboard and the issues went away. Tested
this for more than three weeks with no problems or side effects
whatsoever.
Please find my patch attached.


Cheers,
Vladyslav


Signed-off-by: Vladyslav Shtabovenko <dev@xxxxxxxxxxxxxxxxxxxxxxx>
---
 drivers/hid/hid-holtek-kbd.c    | 4 +++-
 drivers/hid/hid-ids.h           | 1 +
 drivers/hid/usbhid/hid-quirks.c | 2 ++
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-holtek-kbd.c b/drivers/hid/hid-holtek-kbd.c
index 6e1a4a4..6b8593b 100644
--- a/drivers/hid/hid-holtek-kbd.c
+++ b/drivers/hid/hid-holtek-kbd.c
@@ -156,7 +156,9 @@ static int holtek_kbd_probe(struct hid_device *hdev,

 static const struct hid_device_id holtek_kbd_devices[] = {
     { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
-            USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) },
+            USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD),
+        HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
+            USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A0CD)    },
     { }
 };
 MODULE_DEVICE_TABLE(hid, holtek_kbd_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 575aa65..898e4fe 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -527,6 +527,7 @@
 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081    0xa081
 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A0C2    0xa0c2
 #define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096    0xa096
+#define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A0CD    0xa0cd

 #define USB_VENDOR_ID_IMATION        0x0718
 #define USB_DEVICE_ID_DISC_STAKKA    0xd000
diff --git a/drivers/hid/usbhid/hid-quirks.c
b/drivers/hid/usbhid/hid-quirks.c
index e6cfd32..0632939 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -159,6 +159,8 @@ static const struct hid_blacklist {
     { USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_QUAD_HD,
HID_QUIRK_NO_INIT_REPORTS },
     { USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP_V103,
HID_QUIRK_NO_INIT_REPORTS },
     { USB_VENDOR_ID_HOLTEK_ALT,
USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096,
HID_QUIRK_NO_INIT_INPUT_REPORTS },
+    { USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A0CD,
+HID_QUIRK_NO_INIT_INPUT_REPORTS },
     { USB_VENDOR_ID_MULTIPLE_1781,
USB_DEVICE_ID_RAPHNET_4NES4SNES_OLD, HID_QUIRK_MULTI_INPUT },
     { USB_VENDOR_ID_DRACAL_RAPHNET, USB_DEVICE_ID_RAPHNET_2NES2SNES,
HID_QUIRK_MULTI_INPUT },
     { USB_VENDOR_ID_DRACAL_RAPHNET, USB_DEVICE_ID_RAPHNET_4NES4SNES,
HID_QUIRK_MULTI_INPUT },
--
2.5.5



--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux