On Thu, Dec 8, 2016 at 9:15 AM, Guy Shapiro <guy.shapiro@xxxxxxxxxxxxx> wrote: > On 01/12/2016 18:13, Rob Herring wrote: >> >> On Sun, Nov 27, 2016 at 09:44:57AM +0200, Guy Shapiro wrote: >>> >>> The i.MX6UL internal touchscreen controller contains an option to >>> average upon samples. This feature reduces noise from the produced >>> touch locations. >>> >>> This patch introduces a new device tree optional property for this >>> feature. It provides control over the amount of averaged samples per >>> touch event. >>> >>> The property was inspired by a similar property on the >>> "brcm,iproc-touchscreen" binding. >>> >>> Signed-off-by: Guy Shapiro <guy.shapiro@xxxxxxxxxxxxx> >>> --- >>> .../devicetree/bindings/input/touchscreen/imx6ul_tsc.txt | 8 >> >> ++++++++ >>> >>> 1 file changed, 8 insertions(+) >>> >>> diff --git >> >> a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt >> b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt >>> >>> index 853dff9..a66069f 100644 >>> --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt >>> +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt >>> @@ -17,6 +17,13 @@ Optional properties: >>> This value depends on the touch screen. >>> - pre-charge-time: the touch screen need some time to precharge. >>> This value depends on the touch screen. >>> +- average-samples: Number of data samples which are averaged for each >> >> read. >>> >>> + Valid values 0-4 >>> + 0 = 1 sample >>> + 1 = 4 samples >>> + 2 = 8 samples >>> + 3 = 16 samples >>> + 4 = 32 samples >> >> Either this needs a vendor prefix or should be documented as a generic >> property. In the latter case, you should use actual number of samples >> (1-32) for the values. > > In the term "generic property", do you mean to document it on > bindings/input/touchscreen/touchscreen.txt ? Yes. > If so, should I add the "touchscreen-" prefix like all the other properties > in that file? Yes. > Grepping bindings/input/touchscreen/, I found two other device drivers that > implement a > similar property - "ti-tsc-adc" and "brcm,iproc-touchscreen" (The latter, > BTW, uses a non > vendor prefixed property name). Unfortunately, the brcm one doesn't look directly usable. > Do we want to move from per-vendor properties to a generic one? No. Those are set already. I just don't want to get more vendor properties. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
