On Dec 02 2016 or thereabouts, Brian Norris wrote:
> From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
>
> Document a "vdd-supply" and an initialization delay. Can be used for
> powering on/off a HID.
>
> Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Jiri Kosina <jikos@xxxxxxxxxx>
> Cc: linux-input@xxxxxxxxxxxxxxx
> Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> ---
> v2:
> * add compatible property for wacom, per Rob's request
> * name the regulator property specifically (VDD)
>
> v3:
> * remove wacom property, per Benjamin's request
> * add delay property
>
> v4: no change
> ---
> Documentation/devicetree/bindings/input/hid-over-i2c.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> index 488edcb264c4..1ea290167652 100644
> --- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> @@ -17,6 +17,11 @@ Required properties:
> - interrupt-parent: the phandle for the interrupt controller
> - interrupts: interrupt line
>
> +Optional properties:
> +- vdd-supply: phandle of the regulator that provides the supply voltage.
> +- init-delay-ms: time required by the device after power-on before it is ready
> + for communication.
Nitpick: maybe we should say that the power-on applies to the vdd-supply
parameter, not the SET_POWER HID command. I am just worried people will
misuse this parameter.
Otherwise, Acked-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
> +
> Example:
>
> i2c-hid-dev@2c {
> --
> 2.8.0.rc3.226.g39d4020
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
