Re: [PATCH v2 4/7] Input: synaptics-rmi4 - store the attn data in the driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/02/2016 03:41 AM, Benjamin Tissoires wrote:
Now that we have a proper API to set the attention data, there is
no point in keeping it in the transport driver.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>

Reviewed-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>

---

no changes in v2
---
  drivers/input/rmi4/rmi_driver.c |  5 ++---
  drivers/input/rmi4/rmi_f03.c    | 13 +++++++------
  drivers/input/rmi4/rmi_f11.c    | 12 ++++++------
  drivers/input/rmi4/rmi_f12.c    | 43 +++++++++++++++++++++--------------------
  drivers/input/rmi4/rmi_f30.c    | 11 ++++++-----
  include/linux/rmi.h             |  5 ++---
  6 files changed, 45 insertions(+), 44 deletions(-)

diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 85062e4..05a3c4b 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -155,7 +155,7 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
  	if (!data)
  		return 0;
- if (!rmi_dev->xport->attn_data) {
+	if (!data->attn_data.data) {
  		error = rmi_read_block(rmi_dev,
  				data->f01_container->fd.data_base_addr + 1,
  				data->irq_status, data->num_of_irq_regs);
@@ -223,8 +223,7 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
  	count = kfifo_get(&drvdata->attn_fifo, &attn_data);
  	if (count) {
  		*(drvdata->irq_status) = attn_data.irq_status;
-		rmi_dev->xport->attn_data = attn_data.data;
-		rmi_dev->xport->attn_size = attn_data.size;
+		drvdata->attn_data = attn_data;
  	}
ret = rmi_process_interrupt_requests(rmi_dev);
diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
index 06279cd..996dcbb 100644
--- a/drivers/input/rmi4/rmi_f03.c
+++ b/drivers/input/rmi4/rmi_f03.c
@@ -166,6 +166,7 @@ static int rmi_f03_config(struct rmi_function *fn)
  static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
  {
  	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
  	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
  	u16 data_addr = fn->fd.data_base_addr;
  	const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
@@ -176,20 +177,20 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
  	int i;
  	int ret;
- if (!rmi_dev || !rmi_dev->xport)
+	if (!rmi_dev)
  		return -ENODEV;
- if (rmi_dev->xport->attn_data) {
+	if (drvdata->attn_data.data) {
  		/* First grab the data passed by the transport device */
-		if (rmi_dev->xport->attn_size < ob_len) {
+		if (drvdata->attn_data.size < ob_len) {
  			dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
  			return 0;
  		}
- memcpy(obs, rmi_dev->xport->attn_data, ob_len);
+		memcpy(obs, drvdata->attn_data.data, ob_len);
- rmi_dev->xport->attn_data += ob_len;
-		rmi_dev->xport->attn_size -= ob_len;
+		drvdata->attn_data.data += ob_len;
+		drvdata->attn_data.size -= ob_len;
  	} else {
  		/* Grab all of the data registers, and check them for data */
  		ret = rmi_read_block(fn->rmi_dev, data_addr + RMI_F03_OB_OFFSET,
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index 44fc275..bc5e37f 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -1284,19 +1284,19 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
  	int error;
  	int valid_bytes = f11->sensor.pkt_size;
- if (rmi_dev->xport->attn_data) {
+	if (drvdata->attn_data.data) {
  		/*
  		 * The valid data in the attention report is less then
  		 * expected. Only process the complete fingers.
  		 */
-		if (f11->sensor.attn_size > rmi_dev->xport->attn_size)
-			valid_bytes = rmi_dev->xport->attn_size;
+		if (f11->sensor.attn_size > drvdata->attn_data.size)
+			valid_bytes = drvdata->attn_data.size;
  		else
  			valid_bytes = f11->sensor.attn_size;
-		memcpy(f11->sensor.data_pkt, rmi_dev->xport->attn_data,
+		memcpy(f11->sensor.data_pkt, drvdata->attn_data.data,
  			valid_bytes);
-		rmi_dev->xport->attn_data += f11->sensor.attn_size;
-		rmi_dev->xport->attn_size -= f11->sensor.attn_size;
+		drvdata->attn_data.data += f11->sensor.attn_size;
+		drvdata->attn_data.size -= f11->sensor.attn_size;
  	} else {
  		error = rmi_read_block(rmi_dev,
  				data_base_addr, f11->sensor.data_pkt,
diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c
index 82a4964..8c5360c 100644
--- a/drivers/input/rmi4/rmi_f12.c
+++ b/drivers/input/rmi4/rmi_f12.c
@@ -208,19 +208,20 @@ static int rmi_f12_attention(struct rmi_function *fn,
  {
  	int retval;
  	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
  	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
  	struct rmi_2d_sensor *sensor = &f12->sensor;
  	int valid_bytes = sensor->pkt_size;
- if (rmi_dev->xport->attn_data) {
-		if (sensor->attn_size > rmi_dev->xport->attn_size)
-			valid_bytes = rmi_dev->xport->attn_size;
+	if (drvdata->attn_data.data) {
+		if (sensor->attn_size > drvdata->attn_data.size)
+			valid_bytes = drvdata->attn_data.size;
  		else
  			valid_bytes = sensor->attn_size;
-		memcpy(sensor->data_pkt, rmi_dev->xport->attn_data,
+		memcpy(sensor->data_pkt, drvdata->attn_data.data,
  			valid_bytes);
-		rmi_dev->xport->attn_data += sensor->attn_size;
-		rmi_dev->xport->attn_size -= sensor->attn_size;
+		drvdata->attn_data.data += sensor->attn_size;
+		drvdata->attn_data.size -= sensor->attn_size;
  	} else {
  		retval = rmi_read_block(rmi_dev, f12->data_addr,
  					sensor->data_pkt, sensor->pkt_size);
@@ -323,7 +324,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
  	const struct rmi_register_desc_item *item;
  	struct rmi_2d_sensor *sensor;
  	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
-	struct rmi_transport_dev *xport = rmi_dev->xport;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
  	u16 data_offset = 0;
rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
@@ -422,7 +423,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
  	 * HID attention reports.
  	 */
  	item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
@@ -436,15 +437,15 @@ static int rmi_f12_probe(struct rmi_function *fn)
  	}
item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
@@ -456,22 +457,22 @@ static int rmi_f12_probe(struct rmi_function *fn)
  	}
item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
  		f12->data6 = item;
  		f12->data6_offset = data_offset;
  		data_offset += item->reg_size;
  	}
item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
  		f12->data9 = item;
  		f12->data9_offset = data_offset;
  		data_offset += item->reg_size;
@@ -480,27 +481,27 @@ static int rmi_f12_probe(struct rmi_function *fn)
  	}
item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
  		data_offset += item->reg_size;
item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
  		f12->data15 = item;
  		f12->data15_offset = data_offset;
  		data_offset += item->reg_size;
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
index f696137..f4b491e 100644
--- a/drivers/input/rmi4/rmi_f30.c
+++ b/drivers/input/rmi4/rmi_f30.c
@@ -99,6 +99,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
  {
  	struct f30_data *f30 = dev_get_drvdata(&fn->dev);
  	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
  	int retval;
  	int gpiled = 0;
  	int value = 0;
@@ -109,15 +110,15 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
  		return 0;
/* Read the gpi led data. */
-	if (rmi_dev->xport->attn_data) {
-		if (rmi_dev->xport->attn_size < f30->register_count) {
+	if (drvdata->attn_data.data) {
+		if (drvdata->attn_data.size < f30->register_count) {
  			dev_warn(&fn->dev, "F30 interrupted, but data is missing\n");
  			return 0;
  		}
-		memcpy(f30->data_regs, rmi_dev->xport->attn_data,
+		memcpy(f30->data_regs, drvdata->attn_data.data,
  			f30->register_count);
-		rmi_dev->xport->attn_data += f30->register_count;
-		rmi_dev->xport->attn_size -= f30->register_count;
+		drvdata->attn_data.data += f30->register_count;
+		drvdata->attn_data.size -= f30->register_count;
  	} else {
  		retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
  			f30->data_regs, f30->register_count);
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index 1d48656..ac910f7 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -272,9 +272,6 @@ struct rmi_transport_dev {
  	struct rmi_device_platform_data pdata;
struct input_dev *input;
-
-	void *attn_data;
-	int attn_size;
  };
/**
@@ -364,6 +361,8 @@ struct rmi_driver_data {
bool enabled;
  	struct mutex enabled_mutex;
+
+	struct rmi4_attn_data attn_data;
  	DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16);
  };


--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux