On Wed, Nov 23, 2016 at 12:20:41PM +0100, Benjamin Tissoires wrote:
> On Nov 20 2016 or thereabouts, Nick Dyer wrote:
> > Add support for updating firmware, triggered by a sysfs attribute.
> >
> > This patch has been tested on Synaptics S7300.
> >
> > Signed-off-by: Nick Dyer <nick@xxxxxxxxxxxxx>
> > Tested-by: Chris Healy <cphealy@xxxxxxxxx>
> > ---
> > drivers/input/rmi4/Kconfig | 11 +
> > drivers/input/rmi4/Makefile | 1 +
> > drivers/input/rmi4/rmi_bus.c | 3 +
> > drivers/input/rmi4/rmi_driver.c | 105 ++++++---
> > drivers/input/rmi4/rmi_driver.h | 24 ++
> > drivers/input/rmi4/rmi_f01.c | 6 +
> > drivers/input/rmi4/rmi_f34.c | 481 ++++++++++++++++++++++++++++++++++++++++
> > drivers/input/rmi4/rmi_f34.h | 68 ++++++
> > include/linux/rmi.h | 2 +
> > 9 files changed, 670 insertions(+), 31 deletions(-)
> > create mode 100644 drivers/input/rmi4/rmi_f34.c
> > create mode 100644 drivers/input/rmi4/rmi_f34.h
> >
> > diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
> > index 8cbd362..9a24867 100644
> > --- a/drivers/input/rmi4/Kconfig
> > +++ b/drivers/input/rmi4/Kconfig
> > @@ -74,6 +74,17 @@ config RMI4_F30
> > Function 30 provides GPIO and LED support for RMI4 devices. This
> > includes support for buttons on TouchPads and ClickPads.
> >
> > +config RMI4_F34
> > + bool "RMI4 Function 34 (Device reflash)"
> > + depends on RMI4_CORE
> > + select FW_LOADER
> > + help
> > + Say Y here if you want to add support for RMI4 function 34.
> > +
> > + Function 34 provides support for upgrading the firmware on the RMI4
> > + device via the firmware loader interface. This is triggered using a
> > + sysfs attribute.
> > +
> > config RMI4_F54
> > bool "RMI4 Function 54 (Analog diagnostics)"
> > depends on RMI4_CORE
> > diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
> > index a6e2752..0250abf 100644
> > --- a/drivers/input/rmi4/Makefile
> > +++ b/drivers/input/rmi4/Makefile
> > @@ -7,6 +7,7 @@ rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o
> > rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
> > rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
> > rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
> > +rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o
> > rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
> >
> > # Transports
> > diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
> > index 84b3212..ef7a662 100644
> > --- a/drivers/input/rmi4/rmi_bus.c
> > +++ b/drivers/input/rmi4/rmi_bus.c
> > @@ -315,6 +315,9 @@ static struct rmi_function_handler *fn_handlers[] = {
> > #ifdef CONFIG_RMI4_F30
> > &rmi_f30_handler,
> > #endif
> > +#ifdef CONFIG_RMI4_F34
> > + &rmi_f34_handler,
> > +#endif
> > #ifdef CONFIG_RMI4_F54
> > &rmi_f54_handler,
> > #endif
> > diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
> > index 4f8d197..2b17d8c 100644
> > --- a/drivers/input/rmi4/rmi_driver.c
> > +++ b/drivers/input/rmi4/rmi_driver.c
> > @@ -35,14 +35,24 @@
> > #define RMI_DEVICE_RESET_CMD 0x01
> > #define DEFAULT_RESET_DELAY_MS 100
> >
> > -static void rmi_free_function_list(struct rmi_device *rmi_dev)
> > +void rmi_free_function_list(struct rmi_device *rmi_dev)
> > {
> > struct rmi_function *fn, *tmp;
> > struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
> >
> > rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
> >
> > + mutex_lock(&data->irq_mutex);
>
> Sorry for coming late in the party, but now that I am rebasing my
> patches on top of Dmitry's branch, I realise that the mutex lock/unlock
> operations are just wrong now.
>
> irq_mutex used to protect the irq_mask of struct rmi_driver_data and
> where only used sparsely by the .config call during reset. It was also
> used by rmi_process_interrupt_requests() in the IRQ handler, but the
> chances of the conflict where low. Side note, this should be a spinlock
> given that it can be called in an interrupt context.
Ack
> But with this patch, the mutex now serves as a barrier for IRQs. It is
> now taken by a lot of functions that can stall a lot, and so the IRQ
> will not be happy to be put to sleep.
>
> Looking at the code, I realise that we should be able to avoid the whole
> locks by the firmware update if we simply disable/enable the interrupts
> before attempting the firmware update (in rmi_firmware_update()).
>
> If you agree with the general idea, I can revert those locks and simply
> call enable_irq/disable_irq in a following patch.
I don't believe the firmware update will work without the interrupts
being enabled - it uses a completion:
http://git.kernel.org/cgit/linux/kernel/git/dtor/input.git/tree/drivers/input/rmi4/rmi_f34.c?h=synaptics-rmi4#n103
I would suggest that if this is a problem, we can change the F34 to not
use the interrupt and poll instead?
cheers
Nick
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
