Re: [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 19 November 2016 18:38:49 GMT+00:00, Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> wrote:
>On Sat, Nov 12, 2016 at 02:19:30PM +0000, Jonathan Cameron wrote:
>> On 12/11/16 14:04, Jonathan Cameron wrote:
>> > On 11/11/16 19:02, H. Nikolaus Schaller wrote:
>> >> The tsc2007 chip not only has a resistive touch screen controller
>but
>> >> also an external AUX adc imput which can be used for an ambient
>> >> light sensor, battery voltage monitoring or any general purpose.
>> >>
>> >> Additionally it can measure the chip temperature.
>> >>
>> >> This extension provides an iio interface for these adc channels.
>> >>
>> >> Since it is not wasting much resources and is very
>straightforward,
>> >> we simply provide all other adc channels as optional iio
>interfaces
>> >> as weel. This can be used for debugging or special applications.
>> >>
>> >> This patch also splits the tsc2007 driver in several source files:
>> >> tsc2007.h -- constants, structs and stubs
>> >> tsc2007_core.c -- functional parts of the original driver
>> >> tsc2007_iio.c -- the optional iio stuff
>> >>
>> >> Makefile magic allows to conditionally link the iio
>> >> stuff if CONFIG_IIO=y in a way that it works with
>> >> CONFIG_TOUCHSCREEN_TSC2007=m.
>> >>
>> > 
>> > I ran a quick build test and it blows up in a number of ways
>related to
>> > the #ifdef CONFIG_IIO.
>> > 
>> > I'm not entirely sure why but
>> > #if IS_ENABLED(CONFIG_IIO) works fine.
>> Ah, I'm being sleepy today.  It's because I'm building IIO as a
>module
>> and the symbol defined would therefore be CONFIG_IIO_MODULE.
>> 
>> The IS_ENABLED macro takes care of both cases.
>
>No it doesn't. Have you tried building the driver into the kernel with
>IIO as a module?
Fair point. Is there a clean way of handling this?
>
>> > 
>> > Otherwise looks good to me
>> >> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> > Reviewed-by: Jonathan Cameron <jic23@xxxxxxxxxx>
>> >> ---
>> >>  drivers/input/touchscreen/Makefile                 |   2 +
>> >>  drivers/input/touchscreen/tsc2007.h                | 118
>++++++++++++++++
>> >>  .../touchscreen/{tsc2007.c => tsc2007_core.c}      | 119
>++++++----------
>> >>  drivers/input/touchscreen/tsc2007_iio.c            | 152
>+++++++++++++++++++++
>> >>  4 files changed, 310 insertions(+), 81 deletions(-)
>> >>  create mode 100644 drivers/input/touchscreen/tsc2007.h
>> >>  rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c}
>(85%)
>> >>  create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
>> >>
>> >> diff --git a/drivers/input/touchscreen/Makefile
>b/drivers/input/touchscreen/Makefile
>> >> index 81b8645..d932e2d 100644
>> >> --- a/drivers/input/touchscreen/Makefile
>> >> +++ b/drivers/input/touchscreen/Makefile
>> >> @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO)	+= tsc40.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE)	+= tsc200x-core.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_TSC2004)	+= tsc2004.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_TSC2005)	+= tsc2005.o
>> >> +tsc2007-y				:= tsc2007_core.o
>> >> +tsc2007-$(CONFIG_IIO)			+= tsc2007_iio.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
>> >> diff --git a/drivers/input/touchscreen/tsc2007.h
>b/drivers/input/touchscreen/tsc2007.h
>> >> new file mode 100644
>> >> index 0000000..5049bf8
>> >> --- /dev/null
>> >> +++ b/drivers/input/touchscreen/tsc2007.h
>> >> @@ -0,0 +1,118 @@
>> >> +/*
>> >> + * drivers/input/touchscreen/tsc2007.h
>> >> + *
>> >> + * Copyright (c) 2008 MtekVision Co., Ltd.
>> >> + *	Kwangwoo Lee <kwlee@xxxxxxxxxxxxxx>
>> >> + *
>> >> + * Using code from:
>> >> + *  - ads7846.c
>> >> + *	Copyright (c) 2005 David Brownell
>> >> + *	Copyright (c) 2006 Nokia Corporation
>> >> + *  - corgi_ts.c
>> >> + *	Copyright (C) 2004-2005 Richard Purdie
>> >> + *  - omap_ts.[hc], ads7846.h, ts_osk.c
>> >> + *	Copyright (C) 2002 MontaVista Software
>> >> + *	Copyright (C) 2004 Texas Instruments
>> >> + *	Copyright (C) 2005 Dirk Behme
>> >> + *
>> >> + *  This program is free software; you can redistribute it and/or
>modify
>> >> + *  it under the terms of the GNU General Public License version
>2 as
>> >> + *  published by the Free Software Foundation.
>> >> + */
>> >> +
>> >> +#include <linux/input/touchscreen.h>
>> >> +
>> >> +#define TSC2007_MEASURE_TEMP0		(0x0 << 4)
>> >> +#define TSC2007_MEASURE_AUX		(0x2 << 4)
>> >> +#define TSC2007_MEASURE_TEMP1		(0x4 << 4)
>> >> +#define TSC2007_ACTIVATE_XN		(0x8 << 4)
>> >> +#define TSC2007_ACTIVATE_YN		(0x9 << 4)
>> >> +#define TSC2007_ACTIVATE_YP_XN		(0xa << 4)
>> >> +#define TSC2007_SETUP			(0xb << 4)
>> >> +#define TSC2007_MEASURE_X		(0xc << 4)
>> >> +#define TSC2007_MEASURE_Y		(0xd << 4)
>> >> +#define TSC2007_MEASURE_Z1		(0xe << 4)
>> >> +#define TSC2007_MEASURE_Z2		(0xf << 4)
>> >> +
>> >> +#define TSC2007_POWER_OFF_IRQ_EN	(0x0 << 2)
>> >> +#define TSC2007_ADC_ON_IRQ_DIS0		(0x1 << 2)
>> >> +#define TSC2007_ADC_OFF_IRQ_EN		(0x2 << 2)
>> >> +#define TSC2007_ADC_ON_IRQ_DIS1		(0x3 << 2)
>> >> +
>> >> +#define TSC2007_12BIT			(0x0 << 1)
>> >> +#define TSC2007_8BIT			(0x1 << 1)
>> >> +
>> >> +#define	MAX_12BIT			((1 << 12) - 1)
>> >> +
>> >> +#define ADC_ON_12BIT	(TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
>> >> +
>> >> +#define READ_Y		(ADC_ON_12BIT | TSC2007_MEASURE_Y)
>> >> +#define READ_Z1		(ADC_ON_12BIT | TSC2007_MEASURE_Z1)
>> >> +#define READ_Z2		(ADC_ON_12BIT | TSC2007_MEASURE_Z2)
>> >> +#define READ_X		(ADC_ON_12BIT | TSC2007_MEASURE_X)
>> >> +#define PWRDOWN		(TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
>> >> +
>> >> +struct ts_event {
>> >> +	u16	x;
>> >> +	u16	y;
>> >> +	u16	z1, z2;
>> >> +};
>> >> +
>> >> +struct tsc2007 {
>> >> +	struct input_dev	*input;
>> >> +	char			phys[32];
>> >> +
>> >> +	struct i2c_client	*client;
>> >> +
>> >> +	u16			model;
>> >> +	u16			x_plate_ohms;
>> >> +
>> >> +	struct touchscreen_properties prop;
>> >> +
>> >> +	bool			report_resistance;
>> >> +	u16			min_x;
>> >> +	u16			min_y;
>> >> +	u16			max_x;
>> >> +	u16			max_y;
>> >> +	u16			max_rt;
>> >> +	unsigned long		poll_period; /* in jiffies */
>> >> +	int			fuzzx;
>> >> +	int			fuzzy;
>> >> +	int			fuzzz;
>> >> +
>> >> +	unsigned int		gpio;
>> >> +	int			irq;
>> >> +
>> >> +	wait_queue_head_t	wait;
>> >> +	bool			stopped;
>> >> +	bool			pendown;
>> >> +
>> >> +	int			(*get_pendown_state)(struct device *);
>> >> +	void			(*clear_penirq)(void);
>> >> +
>> >> +	struct mutex		mlock;
>> >> +	struct iio_dev		*iio_dev;	/* optional */
>> >> +};
>> >> +
>> >> +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd);
>> >> +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
>> >> +					struct ts_event *tc);
>> >> +bool tsc2007_is_pen_down(struct tsc2007 *ts);
>> >> +
>> >> +#ifdef CONFIG_IIO
>> >> +
>> >> +/* defined in tsc2007_iio.c */
>> >> +int tsc2007_iio_configure(struct tsc2007 *ts);
>> >> +void tsc2007_iio_unconfigure(struct tsc2007 *ts);
>> >> +
>> >> +#else /* CONFIG_IIO */
>> >> +
>> >> +static inline int tsc2007_iio_configure(struct tsc2007 *ts)
>> >> +{
>> >> +	return 0;
>> >> +}
>> >> +static inline void tsc2007_iio_unconfigure(struct tsc2007 *ts)
>> >> +{
>> >> +}
>> >> +
>> >> +#endif /* CONFIG_IIO */
>> >> diff --git a/drivers/input/touchscreen/tsc2007.c
>b/drivers/input/touchscreen/tsc2007_core.c
>> >> similarity index 85%
>> >> rename from drivers/input/touchscreen/tsc2007.c
>> >> rename to drivers/input/touchscreen/tsc2007_core.c
>> >> index 5e3c4bf..72775ae 100644
>> >> --- a/drivers/input/touchscreen/tsc2007.c
>> >> +++ b/drivers/input/touchscreen/tsc2007_core.c
>> >> @@ -27,80 +27,10 @@
>> >>  #include <linux/i2c.h>
>> >>  #include <linux/i2c/tsc2007.h>
>> >>  #include <linux/of_device.h>
>> >> -#include <linux/of.h>
>> >>  #include <linux/of_gpio.h>
>> >> -#include <linux/input/touchscreen.h>
>> >> -
>> >> -#define TSC2007_MEASURE_TEMP0		(0x0 << 4)
>> >> -#define TSC2007_MEASURE_AUX		(0x2 << 4)
>> >> -#define TSC2007_MEASURE_TEMP1		(0x4 << 4)
>> >> -#define TSC2007_ACTIVATE_XN		(0x8 << 4)
>> >> -#define TSC2007_ACTIVATE_YN		(0x9 << 4)
>> >> -#define TSC2007_ACTIVATE_YP_XN		(0xa << 4)
>> >> -#define TSC2007_SETUP			(0xb << 4)
>> >> -#define TSC2007_MEASURE_X		(0xc << 4)
>> >> -#define TSC2007_MEASURE_Y		(0xd << 4)
>> >> -#define TSC2007_MEASURE_Z1		(0xe << 4)
>> >> -#define TSC2007_MEASURE_Z2		(0xf << 4)
>> >> -
>> >> -#define TSC2007_POWER_OFF_IRQ_EN	(0x0 << 2)
>> >> -#define TSC2007_ADC_ON_IRQ_DIS0		(0x1 << 2)
>> >> -#define TSC2007_ADC_OFF_IRQ_EN		(0x2 << 2)
>> >> -#define TSC2007_ADC_ON_IRQ_DIS1		(0x3 << 2)
>> >> -
>> >> -#define TSC2007_12BIT			(0x0 << 1)
>> >> -#define TSC2007_8BIT			(0x1 << 1)
>> >> -
>> >> -#define	MAX_12BIT			((1 << 12) - 1)
>> >> -
>> >> -#define ADC_ON_12BIT	(TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
>> >> -
>> >> -#define READ_Y		(ADC_ON_12BIT | TSC2007_MEASURE_Y)
>> >> -#define READ_Z1		(ADC_ON_12BIT | TSC2007_MEASURE_Z1)
>> >> -#define READ_Z2		(ADC_ON_12BIT | TSC2007_MEASURE_Z2)
>> >> -#define READ_X		(ADC_ON_12BIT | TSC2007_MEASURE_X)
>> >> -#define PWRDOWN		(TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
>> >> -
>> >> -struct ts_event {
>> >> -	u16	x;
>> >> -	u16	y;
>> >> -	u16	z1, z2;
>> >> -};
>> >> -
>> >> -struct tsc2007 {
>> >> -	struct input_dev	*input;
>> >> -	char			phys[32];
>> >> -
>> >> -	struct i2c_client	*client;
>> >> -
>> >> -	u16			model;
>> >> -	u16			x_plate_ohms;
>> >> -
>> >> -	struct touchscreen_properties prop;
>> >> -
>> >> -	bool			report_resistance;
>> >> -	u16			min_x;
>> >> -	u16			min_y;
>> >> -	u16			max_x;
>> >> -	u16			max_y;
>> >> -	u16			max_rt;
>> >> -	unsigned long		poll_period; /* in jiffies */
>> >> -	int			fuzzx;
>> >> -	int			fuzzy;
>> >> -	int			fuzzz;
>> >> +#include "tsc2007.h"
>> >>  
>> >> -	unsigned		gpio;
>> >> -	int			irq;
>> >> -
>> >> -	wait_queue_head_t	wait;
>> >> -	bool			stopped;
>> >> -	bool			pendown;
>> >> -
>> >> -	int			(*get_pendown_state)(struct device *);
>> >> -	void			(*clear_penirq)(void);
>> >> -};
>> >> -
>> >> -static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
>> >> +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
>> >>  {
>> >>  	s32 data;
>> >>  	u16 val;
>> >> @@ -121,6 +51,7 @@ static inline int tsc2007_xfer(struct tsc2007
>*tsc, u8 cmd)
>> >>  
>> >>  	return val;
>> >>  }
>> >> +EXPORT_SYMBOL(tsc2007_xfer);
>> >>  
>> >>  static void tsc2007_read_values(struct tsc2007 *tsc, struct
>ts_event *tc)
>> >>  {
>> >> @@ -138,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007
>*tsc, struct ts_event *tc)
>> >>  	tsc2007_xfer(tsc, PWRDOWN);
>> >>  }
>> >>  
>> >> -static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
>> >> +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
>> >>  					struct ts_event *tc)
>> >>  {
>> >>  	u32 rt = 0;
>> >> @@ -158,8 +89,9 @@ static u32 tsc2007_calculate_resistance(struct
>tsc2007 *tsc,
>> >>  
>> >>  	return rt;
>> >>  }
>> >> +EXPORT_SYMBOL(tsc2007_calculate_resistance);
>> >>  
>> >> -static bool tsc2007_is_pen_down(struct tsc2007 *ts)
>> >> +bool tsc2007_is_pen_down(struct tsc2007 *ts)
>> >>  {
>> >>  	/*
>> >>  	 * NOTE: We can't rely on the pressure to determine the pen down
>> >> @@ -180,6 +112,7 @@ static bool tsc2007_is_pen_down(struct tsc2007
>*ts)
>> >>  
>> >>  	return ts->get_pendown_state(&ts->client->dev);
>> >>  }
>> >> +EXPORT_SYMBOL(tsc2007_is_pen_down);
>> >>  
>> >>  static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
>> >>  {
>> >> @@ -192,7 +125,10 @@ static irqreturn_t tsc2007_soft_irq(int irq,
>void *handle)
>> >>  	while (!ts->stopped && tsc2007_is_pen_down(ts)) {
>> >>  
>> >>  		/* pen is down, continue with the measurement */
>> >> +
>> >> +		mutex_lock(&ts->mlock);
>> >>  		tsc2007_read_values(ts, &tc);
>> >> +		mutex_unlock(&ts->mlock);
>> >>  
>> >>  		rt = tsc2007_calculate_resistance(ts, &tc);
>> >>  
>> >> @@ -450,7 +386,8 @@ static void tsc2007_call_exit_platform_hw(void
>*data)
>> >>  static int tsc2007_probe(struct i2c_client *client,
>> >>  			 const struct i2c_device_id *id)
>> >>  {
>> >> -	const struct tsc2007_platform_data *pdata =
>dev_get_platdata(&client->dev);
>> >> +	const struct tsc2007_platform_data *pdata =
>> >> +		dev_get_platdata(&client->dev);
>> >>  	struct tsc2007 *ts;
>> >>  	struct input_dev *input_dev;
>> >>  	int err;
>> >> @@ -472,7 +409,13 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>  	ts->client = client;
>> >>  	ts->irq = client->irq;
>> >>  	ts->input = input_dev;
>> >> +
>> >> +	err = tsc2007_iio_configure(ts);
>> >> +	if (err < 0)
>> >> +		return err;
>> >> +
>> >>  	init_waitqueue_head(&ts->wait);
>> >> +	mutex_init(&ts->mlock);
>> >>  
>> >>  	snprintf(ts->phys, sizeof(ts->phys),
>> >>  		 "%s/input0", dev_name(&client->dev));
>> >> @@ -494,7 +437,7 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>  	if (pdata) {
>> >>  		err = tsc2007_probe_pdev(client, ts, pdata, id);
>> >>  		if (err)
>> >> -			return err;
>> >> +			goto probe_err;
>> >>  		input_set_abs_params(input_dev, ABS_X, 0, ts->max_x-ts->min_x,
>> >>  							  ts->fuzzx, 0);
>> >>  		input_set_abs_params(input_dev, ABS_Y, 0, ts->max_y-ts->min_y,
>> >> @@ -504,7 +447,7 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>  	} else {
>> >>  		err = tsc2007_probe_dt(client, ts);
>> >>  		if (err)
>> >> -			return err;
>> >> +			goto probe_err;
>> >>  	}
>> >>  
>> >>  	if (pdata) {
>> >> @@ -516,7 +459,7 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>  				dev_err(&client->dev,
>> >>  					"Failed to register exit_platform_hw action, %d\n",
>> >>  					err);
>> >> -				return err;
>> >> +				goto probe_err;
>> >>  			}
>> >>  		}
>> >>  
>> >> @@ -533,7 +476,7 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>  	if (err) {
>> >>  		dev_err(&client->dev, "Failed to request irq %d: %d\n",
>> >>  			ts->irq, err);
>> >> -		return err;
>> >> +		goto probe_err;
>> >>  	}
>> >>  
>> >>  	tsc2007_stop(ts);
>> >> @@ -543,17 +486,30 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>  	if (err < 0) {
>> >>  		dev_err(&client->dev,
>> >>  			"Failed to setup chip: %d\n", err);
>> >> -		return err;	/* usually, chip does not respond */
>> >> +		goto probe_err;	/* chip does not respond */
>> >>  	}
>> >>  
>> >>  	err = input_register_device(input_dev);
>> >>  	if (err) {
>> >>  		dev_err(&client->dev,
>> >>  			"Failed to register input device: %d\n", err);
>> >> -		return err;
>> >> +		goto probe_err;
>> >>  	}
>> >>  
>> >>  	return 0;
>> >> +
>> >> +probe_err:
>> >> +	tsc2007_iio_unconfigure(ts);
>> >> +	return err;
>> >> +}
>> >> +
>> >> +static int tsc2007_remove(struct i2c_client *client)
>> >> +{
>> >> +	struct tsc2007 *ts = i2c_get_clientdata(client);
>> >> +
>> >> +	tsc2007_iio_unconfigure(ts);
>> >> +	input_unregister_device(ts->input);
>> >> +	return 0;
>> >>  }
>> >>  
>> >>  static const struct i2c_device_id tsc2007_idtable[] = {
>> >> @@ -578,6 +534,7 @@ static struct i2c_driver tsc2007_driver = {
>> >>  	},
>> >>  	.id_table	= tsc2007_idtable,
>> >>  	.probe		= tsc2007_probe,
>> >> +	.remove		= tsc2007_remove,
>> >>  };
>> >>  
>> >>  module_i2c_driver(tsc2007_driver);
>> >> diff --git a/drivers/input/touchscreen/tsc2007_iio.c
>b/drivers/input/touchscreen/tsc2007_iio.c
>> >> new file mode 100644
>> >> index 0000000..e492bba
>> >> --- /dev/null
>> >> +++ b/drivers/input/touchscreen/tsc2007_iio.c
>> >> @@ -0,0 +1,152 @@
>> >> +/*
>> >> + * drivers/input/touchscreen/tsc2007_iio.c
>> >> + *
>> >> + * Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG
>> >> + *	Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> >> + *
>> >> + *  This program is free software; you can redistribute it and/or
>modify
>> >> + *  it under the terms of the GNU General Public License version
>2 as
>> >> + *  published by the Free Software Foundation.
>> >> + */
>> >> +
>> >> +#include <linux/i2c.h>
>> >> +#include <linux/iio/iio.h>
>> >> +#include "tsc2007.h"
>> >> +
>> >> +struct tsc2007_iio {
>> >> +	struct tsc2007 *ts;
>> >> +};
>> >> +
>> >> +#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \
>> >> +{ \
>> >> +	.datasheet_name = _name, \
>> >> +	.type = _type, \
>> >> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
>> >> +			BIT(_chan_info), \
>> >> +	.indexed = 1, \
>> >> +	.channel = _chan, \
>> >> +}
>> >> +
>> >> +static const struct iio_chan_spec tsc2007_iio_channel[] = {
>> >> +	TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> +	TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> +	TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> +	TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> +	TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> +	TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /*
>Ohms? */
>> >> +	TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
>> >> +	TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
>> >> +	TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),
>> >> +};
>> >> +
>> >> +static int tsc2007_read_raw(struct iio_dev *indio_dev,
>> >> +	struct iio_chan_spec const *chan, int *val, int *val2, long
>mask)
>> >> +{
>> >> +	struct tsc2007_iio *iio = iio_priv(indio_dev);
>> >> +	struct tsc2007 *tsc = iio->ts;
>> >> +	int adc_chan = chan->channel;
>> >> +	int ret = 0;
>> >> +
>> >> +	if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))
>> >> +		return -EINVAL;
>> >> +
>> >> +	if (mask != IIO_CHAN_INFO_RAW)
>> >> +		return -EINVAL;
>> >> +
>> >> +	mutex_lock(&tsc->mlock);
>> >> +
>> >> +	switch (chan->channel) {
>> >> +	case 0:
>> >> +		*val = tsc2007_xfer(tsc, READ_X);
>> >> +		break;
>> >> +	case 1:
>> >> +		*val = tsc2007_xfer(tsc, READ_Y);
>> >> +		break;
>> >> +	case 2:
>> >> +		*val = tsc2007_xfer(tsc, READ_Z1);
>> >> +		break;
>> >> +	case 3:
>> >> +		*val = tsc2007_xfer(tsc, READ_Z2);
>> >> +		break;
>> >> +	case 4:
>> >> +		*val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));
>> >> +		break;
>> >> +	case 5: {
>> >> +		struct ts_event tc;
>> >> +
>> >> +		tc.x = tsc2007_xfer(tsc, READ_X);
>> >> +		tc.z1 = tsc2007_xfer(tsc, READ_Z1);
>> >> +		tc.z2 = tsc2007_xfer(tsc, READ_Z2);
>> >> +		*val = tsc2007_calculate_resistance(tsc, &tc);
>> >> +		break;
>> >> +	}
>> >> +	case 6:
>> >> +		*val = tsc2007_is_pen_down(tsc);
>> >> +		break;
>> >> +	case 7:
>> >> +		*val = tsc2007_xfer(tsc,
>> >> +				    (ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));
>> >> +		break;
>> >> +	case 8:
>> >> +		*val = tsc2007_xfer(tsc,
>> >> +				    (ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));
>> >> +		break;
>> >> +	}
>> >> +
>> >> +	/* Prepare for next touch reading - power down ADC, enable
>PENIRQ */
>> >> +	tsc2007_xfer(tsc, PWRDOWN);
>> >> +
>> >> +	mutex_unlock(&tsc->mlock);
>> >> +
>> >> +	ret = IIO_VAL_INT;
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +static const struct iio_info tsc2007_iio_info = {
>> >> +	.read_raw = tsc2007_read_raw,
>> >> +	.driver_module = THIS_MODULE,
>> >> +};
>> >> +
>> >> +int tsc2007_iio_configure(struct tsc2007 *ts)
>> >> +{
>> >> +	int err;
>> >> +	struct iio_dev *indio_dev;
>> >> +	struct tsc2007_iio *iio;
>> >> +
>> >> +	indio_dev = devm_iio_device_alloc(&ts->client->dev,
>> >> +		sizeof(struct tsc2007_iio));
>> >> +	if (!indio_dev) {
>> >> +		dev_err(&ts->client->dev, "iio_device_alloc failed\n");
>> >> +		return -ENOMEM;
>> >> +	}
>> >> +
>> >> +	iio = iio_priv(indio_dev);
>> >> +	iio->ts = ts;
>> >> +	ts->iio_dev = (void *) indio_dev;
>> >> +
>> >> +	indio_dev->name = "tsc2007";
>> >> +	indio_dev->dev.parent = &ts->client->dev;
>> >> +	indio_dev->info = &tsc2007_iio_info;
>> >> +	indio_dev->modes = INDIO_DIRECT_MODE;
>> >> +	indio_dev->channels = tsc2007_iio_channel;
>> >> +	indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
>> >> +
>> >> +	err = iio_device_register(indio_dev);
>> >> +	if (err < 0) {
>> >> +		dev_err(&ts->client->dev, "iio_device_register() failed: %d\n",
>> >> +			err);
>> >> +		return err;
>> >> +	}
>> >> +
>> >> +	return 0;
>> >> +}
>> >> +EXPORT_SYMBOL(tsc2007_iio_configure);
>> >> +
>> >> +void tsc2007_iio_unconfigure(struct tsc2007 *ts)
>> >> +{
>> >> +	struct iio_dev *indio_dev = ts->iio_dev;
>> >> +
>> >> +	iio_device_unregister(indio_dev);
>> >> +}
>> >> +EXPORT_SYMBOL(tsc2007_iio_unconfigure);
>> >>
>> > 
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe
>linux-iio" in
>> > the body of a message to majordomo@xxxxxxxxxxxxxxx
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> > 
>> 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux