On 10/26/2016 06:18 PM, Rob Herring wrote: > On Thu, Oct 20, 2016 at 02:59:17PM -0500, Franklin S Cooper Jr wrote: >> On systems with a fixed display/touchscreen orientation it is important to >> pass in the "correct" x and y coordinates based on the orientation. >> Currently, to support landscape and portrait touchscreen-swapped-x-y >> simply does the following: >> >> Assuming touchscreen is as follows: >> X: 1280 Y:800 programmed in touchscreen controller and also interchange >> bit cleared. Assuming ts mounted in portrait mode. >> >> 1280 (X) >> ------ >> | | >> | | 800 (Y) >> | | >> | | >> ------ >> >> 800 (Y) >> ------ >> | | >> | | 1280 (X) >> | | >> | | >> ------ >> >> However, the above isn't really what we want especially in distros that >> assumes a fixed orientation. In this case what we really want is to >> interchange the x and y coordinates so the Y coordinate can return a max >> value of 1280 and X can return a max value of 800. >> >> 800 (X) >> ------ >> | | >> | | 1280 (Y) >> | | >> | | >> ------ >> >> Since the driver is limited to the value reported by the touchscreen >> controller this issue can't be fixed purely in the driver. Therefore, >> add a new DT property that supports interchanging X and Y coordinates >> internally within the hardware. > > I'm not sure I follow why existing properties don't cover this. > >> >> Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx> >> --- >> .../devicetree/bindings/input/touchscreen/goodix.txt | 2 ++ >> drivers/input/touchscreen/goodix.c | 13 +++++++++++++ >> 2 files changed, 15 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt >> index ebc7cb7..b8be2ab 100644 >> --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt >> +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt >> @@ -25,6 +25,8 @@ Optional properties: >> - touchscreen-inverted-y : Y axis is inverted (boolean) >> - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) >> (swapping is done after inverting the axis) >> + - touchscreen-inter-x-y : X and Y maximum values programmed in the device >> + are interchanged internally in hardware. (boolean) > > Minimally this should be vendor specific and have a vendor prefix I > think. Would "goodix,inter-x-y" work? > > Rob > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
