It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 Last submission was a RFC in here: http://www.gossamer-threads.com/lists/linux/kernel/2446863 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 The driving ideas are still the same, and I put them in [1] for memory. This is the first post RFC submission. In order to make a full demonstration of the framework, wm97xx was converted to an MFD, see [2] for the "why". As this serie is a complete wm9713 change towards the new AC97 bus, here is the patch organization : - 1/9, 2/9, 3/9 and 5/9: the new AC97 bus, for Mark and Takashi to review - 4/9: wm9713 conversion, this one has ugly #ifdefs, should be reviewed more carefully - 6/9: prerequisite for final 9/9, for Marek and Sebastian to approve => this one is independent and can flow through Sebastian's tree in this next-cycle if accepted - 7/9: prerequisite for final 9/9, for Mark/Dmitry => this one is also independent and can flow in this cycle if accepted - 8/9: prerequisite for final 9/9, for Lee to review => this one has a dependency on 2/9, so it probably can't fit in this next-cycle - 9/9: this last one depends on all the patches before, so it can't fit in this next-cycle As a sum-up, I'd like to push for review for this -next cycle at least the patches 1, 2, 3, 5, 6 and 9. Happy review. Robert Jarzmik (9): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: add new ac97 bus support ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support power_supply: wm97xx_battery: use power_supply_get_drvdata Input: wm97xx: split out touchscreen registering mfd: wm97xx-core: core support for wm97xx Codec Input: wm97xx: add new AC97 bus support drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/wm97xx-core.c | 247 +++++++++++----- drivers/mfd/Kconfig | 14 + drivers/mfd/Makefile | 1 + drivers/mfd/wm97xx-core.c | 282 ++++++++++++++++++ drivers/power/supply/wm97xx_battery.c | 25 +- include/linux/mfd/wm97xx.h | 31 ++ include/sound/ac97/codec.h | 115 +++++++ include/sound/ac97/compat.h | 21 ++ include/sound/ac97/controller.h | 85 ++++++ include/sound/ac97/regs.h | 262 ++++++++++++++++ include/sound/ac97_codec.h | 239 +-------------- include/sound/pxa2xx-lib.h | 15 +- sound/Kconfig | 2 + sound/Makefile | 1 + sound/ac97/Kconfig | 19 ++ sound/ac97/Makefile | 8 + sound/ac97/ac97_core.h | 10 + sound/ac97/bus.c | 510 ++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 + sound/ac97/snd_ac97_compat.c | 105 +++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 39 ++- sound/soc/Kconfig | 4 + sound/soc/codecs/Kconfig | 3 +- sound/soc/codecs/wm9713.c | 37 ++- sound/soc/pxa/Kconfig | 5 +- sound/soc/pxa/pxa2xx-ac97.c | 22 +- 28 files changed, 1738 insertions(+), 382 deletions(-) create mode 100644 drivers/mfd/wm97xx-core.c create mode 100644 include/linux/mfd/wm97xx.h create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4 [1] RFC PATCH reminder: Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. [2] As a corollary, wm97xx is changed into a MFD device, which at least spawns: - the touchscreen device - the ac97 codec - the problem to solve was stated in http://www.gossamer-threads.com/lists/linux/kernel/2510113#2510113 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
