Add support for updating firmware, triggered by a sysfs attribute.
This patch has been tested on Synaptics S7300.
Signed-off-by: Nick Dyer <nick@xxxxxxxxxxxxx>
Tested-by: Chris Healy <cphealy@xxxxxxxxx>
---
drivers/input/rmi4/Kconfig | 11 +
drivers/input/rmi4/Makefile | 1 +
drivers/input/rmi4/rmi_bus.c | 3 +
drivers/input/rmi4/rmi_driver.c | 89 ++++++--
drivers/input/rmi4/rmi_driver.h | 24 ++
drivers/input/rmi4/rmi_f01.c | 6 +
drivers/input/rmi4/rmi_f34.c | 494 ++++++++++++++++++++++++++++++++++++++++
drivers/input/rmi4/rmi_f34.h | 68 ++++++
include/linux/rmi.h | 1 +
9 files changed, 673 insertions(+), 24 deletions(-)
create mode 100644 drivers/input/rmi4/rmi_f34.c
create mode 100644 drivers/input/rmi4/rmi_f34.h
diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
index 4c8a558..9f10b1f 100644
--- a/drivers/input/rmi4/Kconfig
+++ b/drivers/input/rmi4/Kconfig
@@ -62,6 +62,17 @@ config RMI4_F30
Function 30 provides GPIO and LED support for RMI4 devices. This
includes support for buttons on TouchPads and ClickPads.
+config RMI4_F34
+ bool "RMI4 Function 34 (Device reflash)"
+ depends on RMI4_CORE
+ select FW_LOADER
+ help
+ Say Y here if you want to add support for RMI4 function 34.
+
+ Function 34 provides support for upgrading the firmware on the RMI4
+ device via the firmware loader interface. This is triggered using a
+ sysfs attribute.
+
config RMI4_F54
bool "RMI4 Function 54 (Analog diagnostics)"
depends on RMI4_CORE
diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
index 0bafc85..5f165ad 100644
--- a/drivers/input/rmi4/Makefile
+++ b/drivers/input/rmi4/Makefile
@@ -7,6 +7,7 @@ rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o
rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
+rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o
rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
# Transports
diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
index 3c6a1b5..178d388 100644
--- a/drivers/input/rmi4/rmi_bus.c
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -314,6 +314,9 @@ static struct rmi_function_handler *fn_handlers[] = {
#ifdef CONFIG_RMI4_F30
&rmi_f30_handler,
#endif
+#ifdef CONFIG_RMI4_F34
+ &rmi_f34_handler,
+#endif
#ifdef CONFIG_RMI4_F54
&rmi_f54_handler,
#endif
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index adb3ee8..545f7db 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -33,14 +33,21 @@
#define RMI_DEVICE_RESET_CMD 0x01
#define DEFAULT_RESET_DELAY_MS 100
-static void rmi_free_function_list(struct rmi_device *rmi_dev)
+void rmi_free_function_list(struct rmi_device *rmi_dev)
{
struct rmi_function *fn, *tmp;
struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
+ mutex_lock(&data->irq_mutex);
+
data->f01_container = NULL;
+ data->f34_container = NULL;
+ data->irq_status = NULL;
+ data->fn_irq_bits = NULL;
+ data->current_irq_mask = NULL;
+ data->new_irq_mask = NULL;
/* Doing it in the reverse order so F01 will be removed last */
list_for_each_entry_safe_reverse(fn, tmp,
@@ -48,7 +55,10 @@ static void rmi_free_function_list(struct rmi_device *rmi_dev)
list_del(&fn->node);
rmi_unregister_function(fn);
}
+
+ mutex_unlock(&data->irq_mutex);
}
+EXPORT_SYMBOL_GPL(rmi_free_function_list);
static int reset_one_function(struct rmi_function *fn)
{
@@ -145,24 +155,25 @@ int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
if (!data)
return 0;
+ mutex_lock(&data->irq_mutex);
+ if (!data->irq_status || !data->f01_container) {
+ mutex_unlock(&data->irq_mutex);
+ return 0;
+ }
+
if (!rmi_dev->xport->attn_data) {
error = rmi_read_block(rmi_dev,
data->f01_container->fd.data_base_addr + 1,
data->irq_status, data->num_of_irq_regs);
if (error < 0) {
dev_err(dev, "Failed to read irqs, code=%d\n", error);
+ mutex_unlock(&data->irq_mutex);
return error;
}
}
- mutex_lock(&data->irq_mutex);
bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
data->irq_count);
- /*
- * At this point, irq_status has all bits that are set in the
- * interrupt status register and are enabled.
- */
- mutex_unlock(&data->irq_mutex);
/*
* It would be nice to be able to use irq_chip to handle these
@@ -178,6 +189,8 @@ int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
if (data->input)
input_sync(data->input);
+ mutex_unlock(&data->irq_mutex);
+
return 0;
}
EXPORT_SYMBOL_GPL(rmi_process_interrupt_requests);
@@ -207,12 +220,18 @@ static int rmi_suspend_functions(struct rmi_device *rmi_dev)
struct rmi_function *entry;
int retval;
+ mutex_lock(&data->irq_mutex);
+
list_for_each_entry(entry, &data->function_list, node) {
retval = suspend_one_function(entry);
- if (retval < 0)
+ if (retval < 0) {
+ mutex_unlock(&data->irq_mutex);
return retval;
+ }
}
+ mutex_unlock(&data->irq_mutex);
+
return 0;
}
@@ -241,16 +260,22 @@ static int rmi_resume_functions(struct rmi_device *rmi_dev)
struct rmi_function *entry;
int retval;
+ mutex_lock(&data->irq_mutex);
+
list_for_each_entry(entry, &data->function_list, node) {
retval = resume_one_function(entry);
- if (retval < 0)
+ if (retval < 0) {
+ mutex_unlock(&data->irq_mutex);
return retval;
+ }
}
+ mutex_unlock(&data->irq_mutex);
+
return 0;
}
-static int enable_sensor(struct rmi_device *rmi_dev)
+int rmi_enable_sensor(struct rmi_device *rmi_dev)
{
int retval = 0;
@@ -260,6 +285,7 @@ static int enable_sensor(struct rmi_device *rmi_dev)
return rmi_process_interrupt_requests(rmi_dev);
}
+EXPORT_SYMBOL_GPL(rmi_enable_sensor);
/**
* rmi_driver_set_input_params - set input device id and other data.
@@ -455,10 +481,9 @@ static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
}
-static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
- int (*callback)(struct rmi_device *rmi_dev,
- void *ctx,
- const struct pdt_entry *entry))
+int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
+ int (*callback)(struct rmi_device *rmi_dev,
+ void *ctx, const struct pdt_entry *entry))
{
int page;
int retval = RMI_SCAN_DONE;
@@ -471,6 +496,7 @@ static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
return retval < 0 ? retval : 0;
}
+EXPORT_SYMBOL_GPL(rmi_scan_pdt);
int rmi_read_register_desc(struct rmi_device *d, u16 addr,
struct rmi_register_descriptor *rdesc)
@@ -691,19 +717,15 @@ static int rmi_count_irqs(struct rmi_device *rmi_dev,
int *irq_count = ctx;
*irq_count += pdt->interrupt_source_count;
- if (pdt->function_number == 0x01) {
+ if (pdt->function_number == 0x01)
data->f01_bootloader_mode =
rmi_check_bootloader_mode(rmi_dev, pdt);
- if (data->f01_bootloader_mode)
- dev_warn(&rmi_dev->dev,
- "WARNING: RMI4 device is in bootloader mode!\n");
- }
return RMI_SCAN_CONTINUE;
}
-static int rmi_initial_reset(struct rmi_device *rmi_dev,
- void *ctx, const struct pdt_entry *pdt)
+int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
+ const struct pdt_entry *pdt)
{
int error;
@@ -738,6 +760,7 @@ static int rmi_initial_reset(struct rmi_device *rmi_dev,
/* F01 should always be on page 0. If we don't find it there, fail. */
return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
}
+EXPORT_SYMBOL_GPL(rmi_initial_reset);
static int rmi_create_function(struct rmi_device *rmi_dev,
void *ctx, const struct pdt_entry *pdt)
@@ -779,6 +802,8 @@ static int rmi_create_function(struct rmi_device *rmi_dev,
if (pdt->function_number == 0x01)
data->f01_container = fn;
+ else if (pdt->function_number == 0x34)
+ data->f34_container = fn;
list_add_tail(&fn->node, &data->function_list);
@@ -819,6 +844,7 @@ static int rmi_driver_remove(struct device *dev)
{
struct rmi_device *rmi_dev = to_rmi_device(dev);
+ rmi_f34_remove_sysfs(rmi_dev);
rmi_free_function_list(rmi_dev);
return 0;
@@ -845,7 +871,7 @@ static inline int rmi_driver_of_probe(struct device *dev,
}
#endif
-static int rmi_probe_interrupts(struct rmi_driver_data *data)
+int rmi_probe_interrupts(struct rmi_driver_data *data)
{
struct rmi_device *rmi_dev = data->rmi_dev;
struct device *dev = &rmi_dev->dev;
@@ -867,6 +893,10 @@ static int rmi_probe_interrupts(struct rmi_driver_data *data)
dev_err(dev, "IRQ counting failed with code %d.\n", retval);
return retval;
}
+
+ if (data->f01_bootloader_mode)
+ dev_warn(&rmi_dev->dev, "Device in bootloader mode.\n");
+
data->irq_count = irq_count;
data->num_of_irq_regs = (data->irq_count + 7) / 8;
@@ -884,14 +914,17 @@ static int rmi_probe_interrupts(struct rmi_driver_data *data)
return retval;
}
+EXPORT_SYMBOL_GPL(rmi_probe_interrupts);
-static int rmi_init_functions(struct rmi_driver_data *data)
+int rmi_init_functions(struct rmi_driver_data *data)
{
struct rmi_device *rmi_dev = data->rmi_dev;
struct device *dev = &rmi_dev->dev;
int irq_count;
int retval;
+ mutex_lock(&data->irq_mutex);
+
irq_count = 0;
rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
@@ -916,12 +949,16 @@ static int rmi_init_functions(struct rmi_driver_data *data)
goto err_destroy_functions;
}
+ mutex_unlock(&data->irq_mutex);
+
return 0;
err_destroy_functions:
rmi_free_function_list(rmi_dev);
+ mutex_unlock(&data->irq_mutex);
return retval;
}
+EXPORT_SYMBOL_GPL(rmi_init_functions);
static int rmi_driver_probe(struct device *dev)
{
@@ -1026,6 +1063,10 @@ static int rmi_driver_probe(struct device *dev)
if (retval)
goto err;
+ retval = rmi_f34_create_sysfs(rmi_dev);
+ if (retval)
+ goto err;
+
if (data->input) {
rmi_driver_set_input_name(rmi_dev, data->input);
if (!rmi_dev->xport->input) {
@@ -1039,7 +1080,7 @@ static int rmi_driver_probe(struct device *dev)
if (data->f01_container->dev.driver)
/* Driver already bound, so enable ATTN now. */
- return enable_sensor(rmi_dev);
+ return rmi_enable_sensor(rmi_dev);
return 0;
diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
index 8dfbebe..e627a3a 100644
--- a/drivers/input/rmi4/rmi_driver.h
+++ b/drivers/input/rmi4/rmi_driver.h
@@ -95,12 +95,36 @@ bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
bool rmi_is_physical_driver(struct device_driver *);
int rmi_register_physical_driver(void);
void rmi_unregister_physical_driver(void);
+void rmi_free_function_list(struct rmi_device *rmi_dev);
+int rmi_enable_sensor(struct rmi_device *rmi_dev);
+int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
+ int (*callback)(struct rmi_device *rmi_dev, void *ctx,
+ const struct pdt_entry *entry));
+int rmi_probe_interrupts(struct rmi_driver_data *data);
+int rmi_init_functions(struct rmi_driver_data *data);
+int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
+ const struct pdt_entry *pdt);
char *rmi_f01_get_product_ID(struct rmi_function *fn);
+#ifdef CONFIG_RMI4_F34
+int rmi_f34_create_sysfs(struct rmi_device *rmi_dev);
+void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev);
+#else
+static inline int rmi_f34_create_sysfs(struct rmi_device *rmi_dev)
+{
+ return 0;
+}
+
+static inline void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev)
+{
+}
+#endif /* CONFIG_RMI_F34 */
+
extern struct rmi_function_handler rmi_f01_handler;
extern struct rmi_function_handler rmi_f11_handler;
extern struct rmi_function_handler rmi_f12_handler;
extern struct rmi_function_handler rmi_f30_handler;
+extern struct rmi_function_handler rmi_f34_handler;
extern struct rmi_function_handler rmi_f54_handler;
#endif
diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
index b5d2dfc..b64d1cd 100644
--- a/drivers/input/rmi4/rmi_f01.c
+++ b/drivers/input/rmi4/rmi_f01.c
@@ -62,6 +62,8 @@ struct f01_basic_properties {
#define RMI_F01_STATUS_CODE(status) ((status) & 0x0f)
/* The device has lost its configuration for some reason. */
#define RMI_F01_STATUS_UNCONFIGURED(status) (!!((status) & 0x80))
+/* The device is in bootloader mode */
+#define RMI_F01_STATUS_BOOTLOADER(status) ((status) & 0x40)
/* Control register bits */
@@ -593,6 +595,10 @@ static int rmi_f01_attention(struct rmi_function *fn,
return error;
}
+ if (RMI_F01_STATUS_BOOTLOADER(device_status))
+ dev_warn(&fn->dev,
+ "Device in bootloader mode, please update firmware\n");
+
if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
dev_warn(&fn->dev, "Device reset detected.\n");
error = rmi_dev->driver->reset_handler(rmi_dev);
diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c
new file mode 100644
index 0000000..e4c1319
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f34.c
@@ -0,0 +1,494 @@
+/*
+ * Copyright (c) 2007-2016, Synaptics Incorporated
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+#include <asm/unaligned.h>
+
+#include "rmi_driver.h"
+#include "rmi_f34.h"
+
+static int rmi_f34_write_bootloader_id(struct f34_data *f34)
+{
+ struct rmi_function *fn = f34->fn;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ u8 bootloader_id[F34_BOOTLOADER_ID_LEN];
+ int ret;
+
+ ret = rmi_read_block(rmi_dev, fn->fd.query_base_addr,
+ bootloader_id, sizeof(bootloader_id));
+ if (ret) {
+ dev_err(&fn->dev, "%s: Reading bootloader ID failed: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: writing bootloader id '%c%c'\n",
+ __func__, bootloader_id[0], bootloader_id[1]);
+
+ ret = rmi_write_block(rmi_dev,
+ fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET,
+ bootloader_id, sizeof(bootloader_id));
+ if (ret) {
+ dev_err(&fn->dev, "Failed to write bootloader ID: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rmi_f34_command(struct f34_data *f34, u8 command,
+ unsigned int timeout, bool write_bl_id)
+{
+ struct rmi_function *fn = f34->fn;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ int ret;
+
+ if (write_bl_id) {
+ ret = rmi_f34_write_bootloader_id(f34);
+ if (ret)
+ return ret;
+ }
+
+ init_completion(&f34->v5.cmd_done);
+
+ ret = rmi_read(rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
+ if (ret) {
+ dev_err(&f34->fn->dev,
+ "%s: Failed to read cmd register: %d (command %#02x)\n",
+ __func__, ret, command);
+ return ret;
+ }
+
+ f34->v5.status |= command & 0x0f;
+
+ ret = rmi_write(rmi_dev, f34->v5.ctrl_address, f34->v5.status);
+ if (ret < 0) {
+ dev_err(&f34->fn->dev,
+ "Failed to write F34 command %#02x: %d\n",
+ command, ret);
+ return ret;
+ }
+
+ if (!wait_for_completion_timeout(&f34->v5.cmd_done,
+ msecs_to_jiffies(timeout))) {
+
+ ret = rmi_read(rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
+ if (ret) {
+ dev_err(&f34->fn->dev,
+ "%s: cmd %#02x timed out: %d\n",
+ __func__, command, ret);
+ return ret;
+ }
+
+ if (f34->v5.status & 0x7f) {
+ dev_err(&f34->fn->dev,
+ "%s: cmd %#02x timed out, status: %#02x\n",
+ __func__, command, f34->v5.status);
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
+{
+ struct f34_data *f34 = dev_get_drvdata(&fn->dev);
+ int ret;
+
+ ret = rmi_read(f34->fn->rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n",
+ __func__, f34->v5.status, ret);
+
+ if (!ret && !(f34->v5.status & 0x7f))
+ complete(&f34->v5.cmd_done);
+
+ return 0;
+}
+
+static int rmi_f34_write_blocks(struct f34_data *f34, const void *data,
+ int block_count, u8 command)
+{
+ struct rmi_function *fn = f34->fn;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ u16 address = fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET;
+ u8 start_address[] = { 0, 0 };
+ int i;
+ int ret;
+
+ ret = rmi_write_block(rmi_dev, fn->fd.data_base_addr,
+ start_address, sizeof(start_address));
+ if (ret) {
+ dev_err(&fn->dev, "Failed to write initial zeros: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < block_count; i++) {
+ ret = rmi_write_block(rmi_dev, address,
+ data, f34->v5.block_size);
+ if (ret) {
+ dev_err(&fn->dev,
+ "failed to write block #%d: %d\n", i, ret);
+ return ret;
+ }
+
+ ret = rmi_f34_command(f34, command, F34_IDLE_WAIT_MS, false);
+ if (ret) {
+ dev_err(&fn->dev,
+ "Failed to write command for block #%d: %d\n",
+ i, ret);
+ return ret;
+ }
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "wrote block %d of %d\n",
+ i + 1, block_count);
+
+ data += f34->v5.block_size;
+ }
+
+ return 0;
+}
+
+static int rmi_f34_write_firmware(struct f34_data *f34, const void *data)
+{
+ return rmi_f34_write_blocks(f34, data, f34->v5.fw_blocks,
+ F34_WRITE_FW_BLOCK);
+}
+
+static int rmi_f34_write_config(struct f34_data *f34, const void *data)
+{
+ return rmi_f34_write_blocks(f34, data, f34->v5.config_blocks,
+ F34_WRITE_CONFIG_BLOCK);
+}
+
+int rmi_f34_enable_flash(struct f34_data *f34)
+{
+ return rmi_f34_command(f34, F34_ENABLE_FLASH_PROG,
+ F34_ENABLE_WAIT_MS, true);
+}
+
+static int rmi_f34_flash_firmware(struct f34_data *f34,
+ const struct rmi_f34_firmware *syn_fw)
+{
+ struct rmi_function *fn = f34->fn;
+ int ret;
+
+ if (syn_fw->image_size) {
+ dev_info(&fn->dev, "Erasing firmware...\n");
+ ret = rmi_f34_command(f34, F34_ERASE_ALL,
+ F34_ERASE_WAIT_MS, true);
+ if (ret)
+ return ret;
+
+ dev_info(&fn->dev, "Writing firmware (%d bytes)...\n",
+ syn_fw->image_size);
+ ret = rmi_f34_write_firmware(f34, syn_fw->data);
+ if (ret)
+ return ret;
+ }
+
+ if (syn_fw->config_size) {
+ /*
+ * We only need to erase config if we haven't updated
+ * firmware.
+ */
+ if (!syn_fw->image_size) {
+ dev_info(&fn->dev, "Erasing config...\n");
+ ret = rmi_f34_command(f34, F34_ERASE_CONFIG,
+ F34_ERASE_WAIT_MS, true);
+ if (ret)
+ return ret;
+ }
+
+ dev_info(&fn->dev, "Writing config (%d bytes)...\n",
+ syn_fw->config_size);
+ ret = rmi_f34_write_config(f34,
+ &syn_fw->data[syn_fw->image_size]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int rmi_f34_update_firmware(struct f34_data *f34, const struct firmware *fw)
+{
+ const struct rmi_f34_firmware *syn_fw;
+ int ret;
+
+ syn_fw = (const struct rmi_f34_firmware *)fw->data;
+ BUILD_BUG_ON(offsetof(struct rmi_f34_firmware, data) !=
+ F34_FW_IMAGE_OFFSET);
+
+ rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+ "FW size:%d, checksum:%08x, image_size:%d, config_size:%d\n",
+ (int)fw->size,
+ le32_to_cpu(syn_fw->checksum),
+ le32_to_cpu(syn_fw->image_size),
+ le32_to_cpu(syn_fw->config_size));
+
+ rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+ "FW bootloader_id:%02x, product_id:%.*s, info: %02x%02x\n",
+ syn_fw->bootloader_version,
+ (int)sizeof(syn_fw->product_id), syn_fw->product_id,
+ syn_fw->product_info[0], syn_fw->product_info[1]);
+
+ if (syn_fw->image_size &&
+ syn_fw->image_size != f34->v5.fw_blocks * f34->v5.block_size) {
+ dev_err(&f34->fn->dev,
+ "Bad firmware image: fw size %d, expected %d\n",
+ syn_fw->image_size,
+ f34->v5.fw_blocks * f34->v5.block_size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ if (syn_fw->config_size &&
+ syn_fw->config_size != f34->v5.config_blocks * f34->v5.block_size) {
+ dev_err(&f34->fn->dev,
+ "Bad firmware image: config size %d, expected %d\n",
+ syn_fw->config_size,
+ f34->v5.config_blocks * f34->v5.block_size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ if (syn_fw->image_size && !syn_fw->config_size) {
+ dev_err(&f34->fn->dev, "Bad firmware image: no config data\n");
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ dev_info(&f34->fn->dev, "Firmware image OK\n");
+ mutex_lock(&f34->v5.flash_mutex);
+
+ ret = rmi_f34_flash_firmware(f34, syn_fw);
+
+ mutex_unlock(&f34->v5.flash_mutex);
+
+out:
+ return ret;
+}
+
+int rmi_f34_check_supported(struct rmi_function *fn)
+{
+ u8 version = fn->fd.function_version;
+
+ /* Only version 0 currently supported */
+ if (version == 0)
+ return 0;
+
+ dev_warn(&fn->dev, "F34 V%d not supported!\n", version);
+ return -ENODEV;
+}
+
+static int rmi_firmware_update(struct rmi_driver_data *data,
+ const struct firmware *fw)
+{
+ struct device *dev = &data->rmi_dev->dev;
+ struct f34_data *f34;
+ int ret;
+
+ if (!data->f34_container) {
+ dev_warn(dev, "%s: No F34 present!\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = rmi_f34_check_supported(data->f34_container);
+ if (ret)
+ return ret;
+
+ f34 = dev_get_drvdata(&data->f34_container->dev);
+
+ /* Enter flash mode */
+ ret = rmi_f34_enable_flash(f34);
+ if (ret)
+ return ret;
+
+ /* Tear down functions and re-probe */
+ rmi_free_function_list(data->rmi_dev);
+
+ ret = rmi_probe_interrupts(data);
+ if (ret)
+ return ret;
+
+ ret = rmi_init_functions(data);
+ if (ret)
+ return ret;
+
+ if (!data->f01_bootloader_mode || !data->f34_container) {
+ dev_warn(dev, "%s: No F34 present or not in bootloader!\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ f34 = dev_get_drvdata(&data->f34_container->dev);
+
+ /* Perform firmware update */
+ ret = rmi_f34_update_firmware(f34, fw);
+
+ dev_info(&f34->fn->dev, "Firmware update complete, status:%d\n", ret);
+
+ /* Re-probe */
+ rmi_dbg(RMI_DEBUG_FN, dev, "Re-probing device\n");
+ rmi_free_function_list(data->rmi_dev);
+
+ ret = rmi_scan_pdt(data->rmi_dev, NULL, rmi_initial_reset);
+ if (ret < 0)
+ dev_warn(dev, "RMI reset failed!\n");
+
+ ret = rmi_probe_interrupts(data);
+ if (ret)
+ return ret;
+
+ ret = rmi_init_functions(data);
+ if (ret)
+ return ret;
+
+ if (data->f01_container->dev.driver)
+ /* Driver already bound, so enable ATTN now. */
+ return rmi_enable_sensor(data->rmi_dev);
+
+ rmi_dbg(RMI_DEBUG_FN, dev, "%s complete\n", __func__);
+
+ return ret;
+}
+
+static ssize_t rmi_driver_update_fw_store(struct device *dev,
+ struct device_attribute *dattr,
+ const char *buf, size_t count)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ char fw_name[NAME_MAX];
+ const struct firmware *fw;
+ size_t copy_count = count;
+ int ret;
+
+ if (count == 0 || count >= NAME_MAX)
+ return -EINVAL;
+
+ if (buf[count - 1] == '\0' || buf[count - 1] == '\n')
+ copy_count -= 1;
+
+ strncpy(fw_name, buf, copy_count);
+ fw_name[copy_count] = '\0';
+
+ ret = request_firmware(&fw, fw_name, dev);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "Flashing %s\n", fw_name);
+
+ ret = rmi_firmware_update(data, fw);
+
+ release_firmware(fw);
+
+ return ret ?: count;
+}
+
+static DEVICE_ATTR(update_fw, 0200, NULL, rmi_driver_update_fw_store);
+
+static struct attribute *rmi_firmware_attrs[] = {
+ &dev_attr_update_fw.attr,
+ NULL
+};
+
+static struct attribute_group rmi_firmware_attr_group = {
+ .attrs = rmi_firmware_attrs,
+};
+
+static int rmi_f34_probe(struct rmi_function *fn)
+{
+ struct f34_data *f34;
+ unsigned char f34_queries[9];
+ bool has_config_id;
+ int ret;
+
+ ret = rmi_f34_check_supported(fn);
+ if (ret)
+ return ret;
+
+ f34 = devm_kzalloc(&fn->dev, sizeof(struct f34_data), GFP_KERNEL);
+ if (!f34)
+ return -ENOMEM;
+
+ f34->fn = fn;
+ dev_set_drvdata(&fn->dev, f34);
+
+ ret = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
+ f34_queries, sizeof(f34_queries));
+ if (ret) {
+ dev_err(&fn->dev, "%s: Failed to query properties\n",
+ __func__);
+ return ret;
+ }
+
+ snprintf(f34->bootloader_id, sizeof(f34->bootloader_id),
+ "%c%c", f34_queries[0], f34_queries[1]);
+
+ mutex_init(&f34->v5.flash_mutex);
+ init_completion(&f34->v5.cmd_done);
+
+ f34->v5.block_size = get_unaligned_le16(&f34_queries[3]);
+ f34->v5.fw_blocks = get_unaligned_le16(&f34_queries[5]);
+ f34->v5.config_blocks = get_unaligned_le16(&f34_queries[7]);
+ f34->v5.ctrl_address = fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET +
+ f34->v5.block_size;
+ has_config_id = f34_queries[2] & (1 << 2);
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Bootloader ID: %s\n",
+ f34->bootloader_id);
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Block size: %d\n",
+ f34->v5.block_size);
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "FW blocks: %d\n",
+ f34->v5.fw_blocks);
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "CFG blocks: %d\n",
+ f34->v5.config_blocks);
+
+ if (has_config_id) {
+ ret = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr,
+ f34_queries, sizeof(f34_queries));
+ if (ret) {
+ dev_err(&fn->dev, "Failed to read F34 config ID\n");
+ return ret;
+ }
+
+ snprintf(f34->configuration_id, sizeof(f34->configuration_id),
+ "%02x%02x%02x%02x",
+ f34_queries[0], f34_queries[1],
+ f34_queries[2], f34_queries[3]);
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Configuration ID: %s\n",
+ f34->configuration_id);
+ }
+
+ return 0;
+}
+
+int rmi_f34_create_sysfs(struct rmi_device *rmi_dev)
+{
+ return sysfs_create_group(&rmi_dev->dev.kobj, &rmi_firmware_attr_group);
+}
+
+void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev)
+{
+ sysfs_remove_group(&rmi_dev->dev.kobj, &rmi_firmware_attr_group);
+}
+
+struct rmi_function_handler rmi_f34_handler = {
+ .driver = {
+ .name = "rmi4_f34",
+ },
+ .func = 0x34,
+ .probe = rmi_f34_probe,
+ .attention = rmi_f34_attention,
+};
diff --git a/drivers/input/rmi4/rmi_f34.h b/drivers/input/rmi4/rmi_f34.h
new file mode 100644
index 0000000..6cee528
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f34.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2007-2016, Synaptics Incorporated
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_F34_H
+#define _RMI_F34_H
+
+/* F34 image file offsets. */
+#define F34_FW_IMAGE_OFFSET 0x100
+
+/* F34 register offsets. */
+#define F34_BLOCK_DATA_OFFSET 2
+
+/* F34 commands */
+#define F34_WRITE_FW_BLOCK 0x2
+#define F34_ERASE_ALL 0x3
+#define F34_READ_CONFIG_BLOCK 0x5
+#define F34_WRITE_CONFIG_BLOCK 0x6
+#define F34_ERASE_CONFIG 0x7
+#define F34_ENABLE_FLASH_PROG 0xf
+
+#define F34_STATUS_IN_PROGRESS 0xff
+#define F34_STATUS_IDLE 0x80
+
+#define F34_IDLE_WAIT_MS 500
+#define F34_ENABLE_WAIT_MS 300
+#define F34_ERASE_WAIT_MS 5000
+
+#define F34_BOOTLOADER_ID_LEN 2
+
+struct rmi_f34_firmware {
+ __le32 checksum;
+ u8 pad1[3];
+ u8 bootloader_version;
+ __le32 image_size;
+ __le32 config_size;
+ u8 product_id[10];
+ u8 product_info[2];
+ u8 pad2[228];
+ u8 data[];
+};
+
+struct f34v5_data {
+ u16 block_size;
+ u16 fw_blocks;
+ u16 config_blocks;
+ u16 ctrl_address;
+ u8 status;
+
+ struct completion cmd_done;
+ struct mutex flash_mutex;
+};
+
+struct f34_data {
+ struct rmi_function *fn;
+
+ unsigned char bootloader_id[5];
+ unsigned char configuration_id[9];
+
+ struct f34v5_data v5;
+};
+
+#endif /* _RMI_F34_H */
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index e0aca14..a283a67 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -330,6 +330,7 @@ struct rmi_driver_data {
struct rmi_device *rmi_dev;
struct rmi_function *f01_container;
+ struct rmi_function *f34_container;
bool f01_bootloader_mode;
u32 attn_count;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
