Hello from ;-) Chuwi tablets warrior. Actually have done all requested, .cfg, bin, working module, etc are located : https://gitlab.com/SergK/chuwi_hi12/tree/master. Many thanks and regards, Serge Kolotylo. On Wed, Sep 14, 2016 at 9:29 AM, Tirdea, Irina <irina.tirdea@xxxxxxxxx> wrote: > > >> -----Original Message----- >> From: linux-input-owner@xxxxxxxxxxxxxxx [mailto:linux-input-owner@xxxxxxxxxxxxxxx] On Behalf Of Brad Baker >> Sent: 13 September, 2016 6:05 >> To: Tirdea, Irina >> Cc: bastien nocera; linux-input@xxxxxxxxxxxxxxx >> Subject: Re: Goodix touchscreen works intermittently, fails reading config info. >> >> Irina, a little more info on the symptoms. The user reports the >> touchscreen works when restarting but fails when powering on. He says >> pretty much 100% of the time. The log is the same... >> > > Hi Brad, > > Thanks for all the information you provided. I have already replied on the > Bugzilla thread with some patches that enable reset for the device. > > Regards, > Irina > > >> http://pastebin.com/25haaPQd >> [ 10.246074] goodix_backport: loading out-of-tree module taints kernel. >> [ 10.246172] goodix_backport: module verification failed: signature >> and/or required key missing - tainting kernel >> [ 10.263788] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060 >> [ 10.270135] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186, >> x_max: 0, y_max: 0, touch_num: 0, trigger_type: 0 >> [ 10.270141] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults >> [ 10.270258] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186, >> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0 >> [ 10.270608] input: Goodix Capacitive TouchScreen as >> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6 >> > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
