Hi Steve,
On Thu, Oct 06, 2016 at 04:28:14PM +0000, Steve Twiss wrote:
> Hi Guenter,
>
> Thanks for your reply.
>
> On 06 October 2016 14:28, Guenter Roeck, wrote:
>
> > To: Steve Twiss; LINUX-KERNEL; LINUX-WATCHDOG; Wim Van Sebroeck
> > Subject: Re: [PATCH V1 04/10] watchdog: da9061: watchdog driver
>
> [...]
>
> > > @@ -180,6 +180,11 @@ static const struct watchdog_info da9062_watchdog_info = {
> > > .identity = "DA9062 WDT",
> > > };
> > >
> > > +static const struct watchdog_info da9061_watchdog_info = {
> > > + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> > > + .identity = "DA9061 WDT",
> >
> > This adds a lot of complexity to the driver just to be able to display "DA9061".
> > Why not just change the existing identity to "DA9061/DA9062 WDT" ?
>
> This is true.
> I am using the compatible string to pick a different configuration .data block:
>
> { .compatible = "dlg,da9062-watchdog", .data = &da9062_watchdog_info },
> { .compatible = "dlg,da9061-watchdog", .data = &da9061_watchdog_info },
>
> when the only real difference between the DA9061 and DA9062 watchdog driver
> is the name. Functionally they are identical in this case.
> This was a similar comment in Dialog's internal review on this exact same point.
> "Why not just report one thing?"
>
> My answer to that was because it would allow to distinguish between different chips.
> The watchdog driver would report the correct chip type, despite the driver always
> being for DA9062.
>
> This exact same thing would happen with da9063-onkey and da9062-thermal also.
> For the ONKEY it is marginally confused by needing to support 63, but for 62 and 61
> it is the same thing. Only the name is different.
>
> I have TO:'d Dmitry Torokhov; Eduardo Valentin; Zhang Rui, for that reason.
>
> But, it is just my opinion to keep the "name" different.
> This will not be my decision if accepted into the Linux kernel, but I would like to
> at least be consistent for DA9061 and DA9062 so ... is this an issue?
>
Yes, for me it is. The driver is still the same, and I don't see the point
of increasing code size and making the driver less readable just to be able
to report a slightly different driver identification string. And each time
a similar HW is added we would go through the same effort, again for no good
reason.
FWIW the driver doesn't really need to be updated in the first place.
A compatible statement listing both da9061 and da9062 would do it. Plus,
on top of that, even your change would not guarantee that the output is correct.
A DT entry with lists da9061 compatibility on a da9062 system would report the
"wrong" name. And still work. So I really don't see the point.
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
