On Wed 28 Sep 17:37 PDT 2016, Guenter Roeck wrote: > Instantiating the rmi4 I2C transport driver without interrupts assigned > (for example using manual i2c instantiation from the command line) > caused the driver to fail to load, but it does not clean up its > regulator or transport device registrations. Result is a crash at a later > time, for example when rebooting the system. > > Fixes: 946c8432aab0 ("Input: synaptics-rmi4 - support regulator supplies") Sorry for that. > Fixes: fdf51604f104 ("Input: synaptics-rmi4 - add I2C transport driver") > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Regards, Bjorn > Cc: Andrew Duggan <aduggan@xxxxxxxxxxxxx> > Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > drivers/input/rmi4/rmi_i2c.c | 13 ++++++++++--- > 1 file changed, 10 insertions(+), 3 deletions(-) > > diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c > index 6f2e0e4f0296..d57b227ccd25 100644 > --- a/drivers/input/rmi4/rmi_i2c.c > +++ b/drivers/input/rmi4/rmi_i2c.c > @@ -285,23 +285,30 @@ static int rmi_i2c_probe(struct i2c_client *client, > retval = rmi_set_page(rmi_i2c, 0); > if (retval) { > dev_err(&client->dev, "Failed to set page select to 0.\n"); > - return retval; > + goto error_disable; > } > > retval = rmi_register_transport_device(&rmi_i2c->xport); > if (retval) { > dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n", > client->addr); > - return retval; > + goto error_disable; > } > > retval = rmi_i2c_init_irq(client); > if (retval < 0) > - return retval; > + goto error_unregister; > > dev_info(&client->dev, "registered rmi i2c driver at %#04x.\n", > client->addr); > return 0; > + > +error_unregister: > + rmi_unregister_transport_device(&rmi_i2c->xport); > +error_disable: > + regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), > + rmi_i2c->supplies); > + return retval; > } > > static int rmi_i2c_remove(struct i2c_client *client) > -- > 2.5.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html