Re: [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrew, Dmitry,

On Wednesday 24 August 2016 01:31 AM, Dmitry Torokhov wrote:
> On Tue, Aug 23, 2016 at 10:27:59AM -0500, Andrew F. Davis wrote:
>> On 08/23/2016 01:16 AM, Vignesh R wrote:
>>> Add a driver to read group of GPIO lines and provide its status as a
>>> numerical value as input event to the system. This will help in
>>> intefacing devices, that can be connected over GPIOs, that provide input
>>> to the system by driving GPIO lines connected to them like a rotary dial
>>> or a switch.
>>>
>>> For example, a rotary switch can be connected to four GPIO lines. The
>>> status of the GPIO lines reflect the actual position of the rotary
>>> switch dial. For example, if dial points to 9, then the four GPIO lines
>>> connected to the switch will read HLLH(0b'1001 = 9). This value
>>> can be reported as an ABS_* event to the input subsystem.
>>>
>>> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
>>> Acked-by: Rob Herring <robh@xxxxxxxxxx>
>>> ---
>>>
>>> v2: Use decoder,max-value instead of gpio-decoder,max-value.
>>>
>>>  .../devicetree/bindings/input/gpio-decoder.txt     |  23 ++++
>>>  drivers/input/misc/Kconfig                         |  12 ++
>>>  drivers/input/misc/Makefile                        |   1 +
>>>  drivers/input/misc/gpio_decoder.c                  | 130 +++++++++++++++++++++
>>>  4 files changed, 166 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/input/gpio-decoder.txt
>>>  create mode 100644 drivers/input/misc/gpio_decoder.c
>>>
>>> diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt
>>> new file mode 100644
>>> index 000000000000..f27f083a9075
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt
>>> @@ -0,0 +1,23 @@
>>> +* GPIO Decoder DT bindings
>>> +
>>> +Required Properties:
>>> +- compatible: should be "gpio-decoder"
>>> +- gpios: a spec of gpios (atleast two) to be decoded to a number with
>>
>>                               ^^ two words

Ok.

>>
>>> +  first entry representing the MSB.
>>> +
>>> +Optional Properties:
>>> +- decoder,max-value: Maximum possible value that can be reported by
>>> +  the gpios.

I will change this to decoder-max-value as suggested previously.

>>> +- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y).
>>> +  Defaults to 0 (ABS_X).
>>> +
>>> +Example:
>>> +	gpio-decoder0 {
>>> +		compatible = "gpio-decoder";
>>> +		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
>>> +			<&pca9536 2 GPIO_ACTIVE_HIGH>,
>>> +			<&pca9536 1 GPIO_ACTIVE_HIGH>,
>>> +			<&pca9536 0 GPIO_ACTIVE_HIGH>;
>>> +		linux,axis = <0>; /* ABS_X */
>>> +		decoder,max-value = <9>;
>>> +	};
>>> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
>>> index efb0ca871327..c44513cac3b7 100644
>>> --- a/drivers/input/misc/Kconfig
>>> +++ b/drivers/input/misc/Kconfig
>>> @@ -292,6 +292,18 @@ config INPUT_GPIO_TILT_POLLED
>>>  	  To compile this driver as a module, choose M here: the
>>>  	  module will be called gpio_tilt_polled.
>>>  
>>> +config INPUT_GPIO_DECODER
>>> +	tristate "Polled GPIO Decoder Input driver"
>>> +	depends on GPIOLIB && OF
>>> +	select INPUT_POLLDEV
>>> +	help
>>> +	 Say Y here if you want driver to read status of multiple GPIO
>>> +	 lines and report the encoded value as an absolute integer to
>>> +	 input subsystem.
>>> +
>>> +	 To compile this driver as a module, choose M here: the module
>>> +	 will will be called gpio_decoder.
>>> +
>>>  config INPUT_IXP4XX_BEEPER
>>>  	tristate "IXP4XX Beeper support"
>>>  	depends on ARCH_IXP4XX
>>> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
>>> index 6a1e5e20fc1c..0b6d025f0487 100644
>>> --- a/drivers/input/misc/Makefile
>>> +++ b/drivers/input/misc/Makefile
>>> @@ -35,6 +35,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
>>>  obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
>>>  obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
>>>  obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)	+= gpio_tilt_polled.o
>>> +obj-$(CONFIG_INPUT_GPIO_DECODER)	+= gpio_decoder.o
>>>  obj-$(CONFIG_INPUT_HISI_POWERKEY)	+= hisi_powerkey.o
>>>  obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
>>>  obj-$(CONFIG_INPUT_IMS_PCU)		+= ims-pcu.o
>>> diff --git a/drivers/input/misc/gpio_decoder.c b/drivers/input/misc/gpio_decoder.c
>>> new file mode 100644
>>> index 000000000000..eec0fda6f562
>>> --- /dev/null
>>> +++ b/drivers/input/misc/gpio_decoder.c
>>> @@ -0,0 +1,130 @@
>>> +/*
>>> + * gpio-decoder.c
>>> + *
>>
>> ^ the name of the file often changes without this being updated, it
>> really doesn't add anything anyway, would recommend dropping it.

Ok.

>>
>>> + * A generic driver to reads multiple gpio lines and translate the
>>> + * encoded numeric value into an input event.
>>> + *
>>> + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation version 2.
>>> + *
>>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>>> + * kind, whether express or implied; without even the implied warranty
>>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/device.h>
>>> +#include <linux/gpio/consumer.h>
>>> +#include <linux/input.h>
>>> +#include <linux/input-polldev.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/platform_device.h>
>>> +
>>> +struct gpio_decoder {
>>> +	struct input_polled_dev *poll_dev;
>>> +	struct gpio_descs *input_gpios;
>>> +	struct device *dev;
>>> +	u32 axis;
>>> +	u32 last_stable;
>>> +};
>>> +
>>> +static unsigned int gpio_decoder_get_gpios_state(struct gpio_decoder
>>> +						 *decoder)
>>> +{
>>> +	struct gpio_descs *gpios = decoder->input_gpios;
>>> +	unsigned int ret = 0;
>>> +	int i, val;
>>> +
>>> +	for (i = 0; i < gpios->ndescs; i++) {
>>> +		val = gpiod_get_value_cansleep(gpios->desc[i]);
>>> +		ret = ret << 1 | val;
>>
>> Just to be safe, could you mask val with 0x1 here.
> 
> We also want to check for negative. So I guess:
> 
> 		val = gpiod_get_value_cansleep(gpios->desc[i]);
> 		if (val >= 0)
> 			ret = (ret << 1) | !!val;
> 
> ?

Agreed.

> 
>>
>>> +	}
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static void gpio_decoder_poll_gpios(struct input_polled_dev *poll_dev)
>>> +{
>>> +	struct gpio_decoder *decoder = poll_dev->private;
>>> +	unsigned int state = gpio_decoder_get_gpios_state(decoder);
>>> +
>>> +	if (state != decoder->last_stable) {
>>> +		input_report_abs(poll_dev->input, decoder->axis, state);
>>> +		input_sync(poll_dev->input);
>>> +		decoder->last_stable = state;
>>> +	}
>>> +}
>>> +
>>> +static int gpio_decoder_probe(struct platform_device *pdev)
>>> +{
>>> +	struct device *dev = &pdev->dev;
>>> +	struct gpio_decoder *decoder;
>>> +	struct input_polled_dev *poll_dev;
>>> +	u32  max;
>>> +	int err;
>>> +
>>> +	decoder = devm_kzalloc(dev, sizeof(struct gpio_decoder), GFP_KERNEL);
>>> +	if (!decoder)
>>> +		return -ENOMEM;
>>> +
>>> +	device_property_read_u32(dev, "linux,axis", &decoder->axis);
>>> +	decoder->input_gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
>>> +	if (IS_ERR(decoder->input_gpios)) {
>>> +		dev_err(dev, "unable to acquire input gpios\n");
>>> +		return PTR_ERR(decoder->input_gpios);
>>> +	}
>>> +	if (decoder->input_gpios->ndescs < 2) {
>>> +		dev_err(dev, "not enough gpios found\n");
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	if (device_property_read_u32(dev, "decoder,max-value", &max))
>>> +		max = BIT(decoder->input_gpios->ndescs);
>>> +
>>> +	decoder->dev = dev;
>>> +	poll_dev = devm_input_allocate_polled_device(decoder->dev);
>>> +	if (!poll_dev)
>>> +		return -ENOMEM;
>>> +
>>> +	poll_dev->private = decoder;
>>> +	poll_dev->poll = gpio_decoder_poll_gpios;
>>> +	decoder->poll_dev = poll_dev;
>>> +
>>> +	poll_dev->input->name = pdev->name;
>>> +	poll_dev->input->id.bustype = BUS_HOST;
>>> +	poll_dev->input->dev.parent = dev;
> 
> No need to set for devices allocated with
> devm_input_allocate_polled_device.

Will drop this.

> 
>>> +	input_set_abs_params(poll_dev->input, decoder->axis, 0, max, 0, 1);
>>> +
>>> +	err = input_register_polled_device(poll_dev);
>>> +	if (err) {
>>> +		dev_err(dev, "failed to register polled  device\n");
>>> +		return err;
>>> +	}
>>> +	platform_set_drvdata(pdev, decoder);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct of_device_id gpio_decoder_of_match[] = {
>>> +	{ .compatible = "gpio-decoder", },
>>> +	{ },
>>> +};
>>> +MODULE_DEVICE_TABLE(of, gpio_decoder_of_match);
>>> +
>>> +static struct platform_driver gpio_decoder_driver = {
>>> +	.probe		= gpio_decoder_probe,
>>> +	.driver		= {
>>> +		.name	= "gpio-decoder",
>>> +		.of_match_table = of_match_ptr(gpio_decoder_of_match),
>>
>> When the struct 'gpio_decoder_of_match' is always defined (not
>> conditional on OF support), then 'of_match_ptr' does nothing and can be
>> dropped here.
> 
> There is nothing in this driver that makes it OF-specific. I'd leave
> of_match_ptr() as is, added #ifdef CONFIG_OF guard around
> gpio_decoder_of_match, 
>and changed "depends on GPIOLIB && OF" to "depends on GPIOLIB || COMPILE_TEST".
> 

Agreed. Thanks for the review!


-- 
Regards
Vignesh
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux