Re: [PATCH] input: touchscreen: silead: Add regulator support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



HI,

On 22-08-16 23:11, Dmitry Torokhov wrote:
Hi Hans,

On Tue, Aug 16, 2016 at 09:35:24PM +0200, Hans de Goede wrote:
On some tablets the touchscreen controller is powered by seperate
regulators, add support for this.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 .../bindings/input/touchscreen/silead_gsl1680.txt  |  2 +
 drivers/input/touchscreen/silead.c                 | 51 ++++++++++++++++++++--
 2 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
index 37a9370..65eb4c7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
@@ -22,6 +22,8 @@ Optional properties:
 - touchscreen-inverted-y  : See touchscreen.txt
 - touchscreen-swapped-x-y : See touchscreen.txt
 - silead,max-fingers	  : maximum number of fingers the touchscreen can detect
+- vddio-supply		  : regulator phandle for controller VDDIO
+- avdd-supply		  : regulator phandle for controller AVDD

 Example:

diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index 7379fe1..04992c5 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -29,6 +29,7 @@
 #include <linux/input/touchscreen.h>
 #include <linux/pm.h>
 #include <linux/irq.h>
+#include <linux/regulator/consumer.h>

 #include <asm/unaligned.h>

@@ -72,6 +73,8 @@ enum silead_ts_power {
 struct silead_ts_data {
 	struct i2c_client *client;
 	struct gpio_desc *gpio_power;
+	struct regulator *vddio;
+	struct regulator *avdd;
 	struct input_dev *input;
 	char fw_name[64];
 	struct touchscreen_properties prop;
@@ -463,21 +466,52 @@ static int silead_ts_probe(struct i2c_client *client,
 	if (client->irq <= 0)
 		return -ENODEV;

+	data->vddio = devm_regulator_get_optional(dev, "vddio");

No need for devm_regulator_get_optional(), devm_regulator_get() will
give you dummy regulator that you can enable/disable.
regulator_get_optional() is only need if you have truly optional
functionality in controller and you need to adjust behavior depending on
presence of a regulator.

I prefer using get_optional and not getting the dmesg output about
using a dummy regulator, that tends to leads to users asking
questions and dealing with not having the regulator is easy,
but if you want me to drop the _optional bit and turn any
errors into hard errors I can do that for v2.

+	if (IS_ERR(data->vddio)) {
+		if (PTR_ERR(data->vddio) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		data->vddio = NULL;
+	}
+
+	data->avdd = devm_regulator_get_optional(dev, "avdd");
+	if (IS_ERR(data->avdd)) {
+		if (PTR_ERR(data->avdd) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		data->avdd = NULL;
+	}
+
+	/*
+	 * Enable regulators at probe and disable them at remove, we need
+	 * to keep the chip powered otherwise it forgets its firmware.
+	 */
+	if (data->vddio) {
+		error = regulator_enable(data->vddio);
+		if (error)
+			return error;
+	}
+
+	if (data->avdd) {
+		error = regulator_enable(data->avdd);
+		if (error)
+			goto disable_vddio;
+	}

Hmm, so you are enabling regulators and leave them on. That is not
great. I'd rather we powered the device up during probe(), but then shut
it off and waited for ->open() to be called. And power it down in
->close(). You also need to handle it in suspend and resume.

The problem is the chip needs firmware (actually config data and
lookup tables with info about the digitizer) and loading that takes
aprox. 1 second so keeping the regulator on is better IMHO.

As for power usage the device also has an enable pin, which we already
drive high on open / drive low on close (and suspend/resume), with this
pin low the current usage of the device is very minimal.

Actually of the 20 tablets I've with a gsl chip only 2 have taken the
trouble to hook it up to a separate regulator. All the others just
have it hooked to their default 3.3V rail. So re-loading the
firmware on open / resume would penalize 18 of these with a 1 second
delay, for a very minimal current saving on 2 of these.

IMHO, esp. adding 1s delay to resume is not acceptable.

So all in all I would like you to take this as is :) But if you still
want a v2 let me know.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux