Hi,
On 27-07-16 23:35, Dmitry Torokhov wrote:
On Tue, Jul 19, 2016 at 11:44:25AM -0700, Dmitry Torokhov wrote:
On Sat, Jul 16, 2016 at 12:56:05PM -0500, Rob Herring wrote:
On Mon, Jul 11, 2016 at 05:51:44PM +0200, Hans de Goede wrote:
From: Robert Dolca <robert.dolca@xxxxxxxxx>
This driver adds support for Silead touchscreens. It has been tested
with GSL1680 and GSL3680 touch panels.
It supports ACPI and device tree enumeration. Screen resolution,
the maximum number of fingers supported and firmware name are
configurable.
Signed-off-by: Robert Dolca <robert.dolca@xxxxxxxxx>
Signed-off-by: Daniel Jansen <djaniboe@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v6:
-Default to 5 fingers if max-fingers is not specified
-Improve devicetree binding doc: improve wake-gpios description, use
"See touchscreen.txt" where applicable
---
.../bindings/input/touchscreen/silead_gsl1680.txt | 36 ++
drivers/input/touchscreen/Kconfig | 13 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/silead.c | 652 +++++++++++++++++++++
4 files changed, 702 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
create mode 100644 drivers/input/touchscreen/silead.c
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
new file mode 100644
index 0000000..1e58d37
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
@@ -0,0 +1,36 @@
+* GSL 1680 touchscreen controller
+
+Required properties:
+- compatible : "silead,gsl1680"
+- reg : I2C slave address of the chip (0x40)
+- interrupt-parent : a phandle pointing to the interrupt controller
+ serving the interrupt for this chip
+- interrupts : interrupt specification for the gsl1680 interrupt
+- power-gpios : Specification for the pin connected to the gsl1680's
+ shutdown input. This needs to be driven high to take the
+ gsl1680 out of its low power state
+- touchscreen-size-x : See touchscreen.txt
+- touchscreen-size-y : See touchscreen.txt
+- touchscreen-max-fingers : maximum number of fingers the touchscreen can detect
If you name it like a standard property, then it should be documented in
touchscreen.txt.
Actually this is very much Silead-specific wart, I'd rather we called it
"max-fingers" or "silead,max-fingers" to illustrate that it is not at
all a generic property.
Rob, will you be OK with it?
Rob, ping? I'd like to get it into the tree and this is only outstanding
question.
I think that your suggestion to make this "silead,max-fingers" is a good idea,
I will do a v8 with this soon (or feel free to fixup v7 yourself).
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
