On 2016-06-24 12:44, Anthony Felice wrote: > This adds nodes to enable tcon0 and dcu0 for the Vybrid Tower. These > are used to drive the Vybrid Tower TWR-LCD-RGB display. Also, a node > for the nec nl4827hc19-05b panel on the TWR-LCD-RGB display has been > added. So my pixel clock polarity changes which will be part of 4.7 work for Tower? I could never actually test that since I don't have the display here... https://patchwork.kernel.org/patch/8874971/ This patch looks good to me: Acked-by: Stefan Agner <stefan@xxxxxxxx> -- Stefan > > Signed-off-by: Anthony Felice <tony.felice@xxxxxxxxxxx> > --- > arch/arm/boot/dts/vf610-twr.dts | 48 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > > diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts > index cdc1007..ad1aff9 100644 > --- a/arch/arm/boot/dts/vf610-twr.dts > +++ b/arch/arm/boot/dts/vf610-twr.dts > @@ -66,6 +66,10 @@ > clock-frequency = <50000000>; > }; > > + panel: panel { > + compatible = "nec,nl4827hc19-05b"; > + }; > + > regulators { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -134,6 +138,13 @@ > <&clks VF610_CLK_ENET_EXT>; > }; > > +&dcu0 { > + fsl,panel = <&panel>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_dcu0>; > + status = "okay"; > +}; > + > &dspi0 { > bus-num = <0>; > pinctrl-names = "default"; > @@ -210,6 +221,39 @@ > > &iomuxc { > vf610-twr { > + pinctrl_dcu0: dcu0grp { > + fsl,pins = < > + VF610_PAD_PTE0__DCU0_HSYNC 0x42 > + VF610_PAD_PTE1__DCU0_VSYNC 0x42 > + VF610_PAD_PTE2__DCU0_PCLK 0x42 > + VF610_PAD_PTE4__DCU0_DE 0x42 > + VF610_PAD_PTE5__DCU0_R0 0x42 > + VF610_PAD_PTE6__DCU0_R1 0x42 > + VF610_PAD_PTE7__DCU0_R2 0x42 > + VF610_PAD_PTE8__DCU0_R3 0x42 > + VF610_PAD_PTE9__DCU0_R4 0x42 > + VF610_PAD_PTE10__DCU0_R5 0x42 > + VF610_PAD_PTE11__DCU0_R6 0x42 > + VF610_PAD_PTE12__DCU0_R7 0x42 > + VF610_PAD_PTE13__DCU0_G0 0x42 > + VF610_PAD_PTE14__DCU0_G1 0x42 > + VF610_PAD_PTE15__DCU0_G2 0x42 > + VF610_PAD_PTE16__DCU0_G3 0x42 > + VF610_PAD_PTE17__DCU0_G4 0x42 > + VF610_PAD_PTE18__DCU0_G5 0x42 > + VF610_PAD_PTE19__DCU0_G6 0x42 > + VF610_PAD_PTE20__DCU0_G7 0x42 > + VF610_PAD_PTE21__DCU0_B0 0x42 > + VF610_PAD_PTE22__DCU0_B1 0x42 > + VF610_PAD_PTE23__DCU0_B2 0x42 > + VF610_PAD_PTE24__DCU0_B3 0x42 > + VF610_PAD_PTE25__DCU0_B4 0x42 > + VF610_PAD_PTE26__DCU0_B5 0x42 > + VF610_PAD_PTE27__DCU0_B6 0x42 > + VF610_PAD_PTE28__DCU0_B7 0x42 > + >; > + }; > + > pinctrl_adc0_ad5: adc0ad5grp { > fsl,pins = < > VF610_PAD_PTC30__ADC0_SE5 0xa1 > @@ -370,6 +414,10 @@ > status = "okay"; > }; > > +&tcon0 { > + status = "okay"; > +}; > + > &uart1 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_uart1>; -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
