Add i2c_hid_shutdown for i2c-hid driver to send suspend cmd &
disable irq before device shutdown.
Some HW design is that the power to i2c hid device won't down
after device shutdown. Also the i2c-hid driver do not send suspend
cmd to the hid i2c device and disable its irq before shutdown.So
if We touch the touchscreen or some other i2c hid device ,the power
consumtion will be go up even when the device is in shutdown state.
Though the root cause maybe a HW issue. But it seems that it is a
good pratice to set power sleep for i2c-hid device before shutdown.
Signed-off-by: Guohua Zhong <ghzhong@xxxxxxxxxxxxxxxxx>
---
drivers/hid/i2c-hid/i2c-hid.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 2e021ba..d6ea97b 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -1106,6 +1106,12 @@ static int i2c_hid_remove(struct i2c_client *client)
return 0;
}
+static void i2c_hid_shutdown(struct i2c_client *client)
+{
+ i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ disable_irq(client->irq);
+}
+
#ifdef CONFIG_PM_SLEEP
static int i2c_hid_suspend(struct device *dev)
{
@@ -1230,7 +1236,7 @@ static struct i2c_driver i2c_hid_driver = {
.probe = i2c_hid_probe,
.remove = i2c_hid_remove,
-
+ .shutdown = i2c_hid_shutdown,
.id_table = i2c_hid_id_table,
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
