On Tue, Jun 14, 2016 at 6:01 PM, Bastien Nocera <hadess@xxxxxxxxxx> wrote: > On Tue, 2016-06-14 at 17:08 +0100, Grant Likely wrote: >> On Tue, Jun 14, 2016 at 4:12 PM, Bastien Nocera <hadess@xxxxxxxxxx> >> wrote: >> > On Tue, 2016-06-14 at 14:44 +0100, Grant Likely wrote: >> > > On Fri, Jun 10, 2016 at 4:27 PM, Bastien Nocera <hadess@xxxxxxxxx >> > > t> >> > > wrote: >> > > > On Fri, 2016-06-10 at 08:23 -0700, Srinivas Pandruvada wrote: >> > > > > On Fri, 2016-06-10 at 17:04 +0200, Bastien Nocera wrote: >> > > > > > > >> > > > > >> > > > > [...] >> > > > > >> > > > > > Are there any errors when setting the triggers? >> > > > > > >> > > > > Is there any debug option in this service to give more >> > > > > verbose >> > > > > output? >> > > > >> > > > Add: >> > > > Environment="G_MESSAGES_DEBUG=all" >> > > > >> > > > To the service file. You should see the debug in systemctl: >> > > > systemctl status iio-sensor-proxy.service >> > > > >> > > > Or in journalctl if there's too much data: >> > > > journalctl --reverse -u iio-sensor-proxy.service >> > > >> > > Still no joy on the sensors. The proxy starts up and detects the >> > > sensors, but I don't see any sensor events occurring: >> > >> > Could you try again with the current master of iio-sensor-proxy? >> > Make >> > sure to install the file in the same location as in your distro >> > provided package. >> > >> > I've added more debug/warnings to a few cases where it would have >> > silently failed in the past. >> > >> > In particular, I don't see any messages that would be coming out >> > of: >> > https://github.com/hadess/iio-sensor-proxy/blob/master/src/iio-buff >> > er-utils.c#L512 >> > >> > Could it be that the sub-directory is populated after the device is >> > created in the kernel, causing a race? >> > >> > Either that, or the contents of the scan_elements/ directory is not >> > the >> > one expected by this code. >> > >> > The output of this command should us that: >> > ls /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9- >> > A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR- >> > 200073.8.auto/iio:device1/scan_elements >> >> Hmmm, this is interesting. I fetched, built and ran the latest >> iio-sensor-proxy. It quit with the following error. However, >> immediately afterwards, I ran the Debian packaged version (1.1-1), >> and >> the sensors started to work. Something in the latest master activates >> the sensors enough for the older version to work. > > There's no changes in that code other than me introducing a bug that'd > make it throw a warning when the sensor was already enabled. Fixed now. > > Could you try again, but make sure to replace the existing iio-sensor- > proxy so it's started on boot, when the device appears. If you see the > warning again, please attach the output out from "ls" as requested in > the earlier mail. Oops, missed that the first time. Here you go: root@gladys:~# ls /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1/scan_elements in_accel_x_en in_accel_y_en in_accel_z_en in_accel_x_index in_accel_y_index in_accel_z_index in_accel_x_type in_accel_y_type in_accel_z_type > If it doesn't warn on startup, and it fails to work, then we're > probably looking at a bug in the kernel... Here is the output. The latest master still doesn't work. However, it has the same behaviour that running the broken version of iio-sensors-proxy (207b5bbd8) will cause the good one start working (92fa6ea9e). -- Logs begin at Tue 2016-06-14 22:19:47 BST, end at Tue 2016-06-14 22:20:52 BST. -- Jun 14 22:19:48 gladys systemd[1]: Starting IIO Sensor Proxy service... Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Found accel_3d at /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Found device /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1 of type accelerometer at IIO Buffer accelerometer Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Found magn_3d at /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Found device /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6 of type compass at IIO Buffer Compass Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Found associated trigger at /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/trigger1 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1/scan_elements/in_accel_x_en Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1/scan_elements/in_accel_y_en Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0001/HID-SENSOR-200073.8.auto/iio:device1/scan_elements/in_accel_z_en Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Got type for in_accel_x: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Got type for in_accel_y: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Got type for in_accel_z: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Built channel array for in_accel_x: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Built channel array for in_accel_y: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Built channel array for in_accel_z: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Found associated trigger at /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/trigger6 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6/scan_elements/in_magn_x_en Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6/scan_elements/in_magn_y_en Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6/scan_elements/in_magn_z_en Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Enabled sensor /sys/devices/pci0000:00/0000:00:13.0/{33AECD58-B679-4E54-9BD9-A04D34F0C226}/001E:8086:22D8.0003/HID-SENSOR-200083.27.auto/iio:device6/scan_elements/in_rot_from_north_magnetic_tilt_comp_en Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Got type for in_magn_x: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Got type for in_magn_y: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Got type for in_magn_z: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Got type for in_rot_from_north_magnetic_tilt_comp: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Built channel array for in_magn_x: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Built channel array for in_magn_y: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:19:48 gladys systemd[1]: Started IIO Sensor Proxy service. Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Built channel array for in_magn_z: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Built channel array for in_rot_from_north_magnetic_tilt_comp: is signed: 1, bytes: 4, bits_used: 32, shift: 0, mask: 0x0, be: 0 Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Handling driver refcounting method 'ClaimAccelerometer' for accelerometer device Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Handling driver refcounting method 'ReleaseLight' for ambient light sensor device Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: Handling driver refcounting method 'ClaimAccelerometer' for accelerometer device Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:44 gladys iio-sensor-proxy[577]: ** (process:577): DEBUG: No new data available Jun 14 22:20:47 gladys systemd[1]: Stopping IIO Sensor Proxy service... Jun 14 22:20:47 gladys iio-sensor-proxy[577]: ** (process:577): Jun 14 22:20:47 gladys systemd[1]: Stopped IIO Sensor Proxy service. > > Cheers -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
