Hi Stephen,
thanks for the submission.
On May 23 2016 or thereabouts, Stephen Just wrote:
> This change creates a second input device which will handle input from
> a Surface Pen. The Surface Pen supplies a different packet header than
> touch events, so it is simple to handle one or the other.
>
> This patch handles both the newer Surface Pen with one button, and the
> older variant with a second button to switch to Eraser mode.
Oh... Would you mind sharing an evemu-record of such older variant with
the Eraser mode? We might need to deal with that differently in
libinput...
>
> Signed-off-by: Stephen Just <stephenjust@xxxxxxxxx>
> ---
> drivers/input/touchscreen/surface3_spi.c | 102 +++++++++++++++++++++++++++++++
> 1 file changed, 102 insertions(+)
>
> diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c
> index 204a162..52a2cde 100644
> --- a/drivers/input/touchscreen/surface3_spi.c
> +++ b/drivers/input/touchscreen/surface3_spi.c
> @@ -28,11 +28,13 @@
> #define SURFACE3_PACKET_SIZE 264
>
> #define SURFACE3_REPORT_TOUCH 0xd2
> +#define SURFACE3_REPORT_PEN 0x16
>
> struct surface3_ts_data {
> struct spi_device *spi;
> struct gpio_desc *gpiod_rst[2];
> struct input_dev *input_dev;
> + struct input_dev *pen_input_dev;
>
> u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned;
> };
> @@ -49,6 +51,14 @@ struct surface3_ts_data_finger {
> u32 padding;
> } __packed;
>
> +struct surface3_ts_data_pen {
> + u8 status;
> + __le16 x;
> + __le16 y;
> + __le16 pressure;
> + u8 padding;
> +} __packed;
> +
> static int surface3_spi_read(struct surface3_ts_data *ts_data)
> {
> struct spi_device *spi = ts_data->spi;
> @@ -114,6 +124,52 @@ static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *dat
> input_sync(ts_data->input_dev);
> }
>
> +static void surface3_spi_report_pen(struct surface3_ts_data *ts_data,
> + struct surface3_ts_data_pen *pen)
> +{
> + int st = pen->status;
> + int prox = st & 0x01;
> + int rubber = st & 0x18;
> +
> + input_report_key(ts_data->pen_input_dev,
> + BTN_TOUCH,
> + (st & 0x12));
> +
> + input_report_key(ts_data->pen_input_dev,
> + BTN_TOOL_PEN,
> + prox && !rubber);
> +
> + input_report_key(ts_data->pen_input_dev,
> + BTN_TOOL_RUBBER,
> + prox && rubber);
> +
> + if (st) {
> + input_report_key(ts_data->pen_input_dev,
> + BTN_STYLUS,
> + st & 0x04);
> +
> + input_report_abs(ts_data->pen_input_dev,
> + ABS_X,
> + get_unaligned_le16(&pen->x));
> + input_report_abs(ts_data->pen_input_dev,
> + ABS_Y,
> + get_unaligned_le16(&pen->y));
> + input_report_abs(ts_data->pen_input_dev,
> + ABS_PRESSURE,
> + get_unaligned_le16(&pen->pressure));
> + }
> +}
> +
> +static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data)
> +{
> + struct surface3_ts_data_pen *pen;
> +
> + pen = (struct surface3_ts_data_pen *)&data[15];
> +
> + surface3_spi_report_pen(ts_data, pen);
> + input_sync(ts_data->pen_input_dev);
> +}
> +
> static void surface3_spi_process(struct surface3_ts_data *ts_data)
> {
> const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01};
> @@ -127,6 +183,8 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data)
>
> if (data[9] == SURFACE3_REPORT_TOUCH)
> surface3_spi_process_touch(ts_data, data);
> + else if (data[9] == SURFACE3_REPORT_PEN)
> + surface3_spi_process_pen(ts_data, data);
nitpicking: a switch/case would present better :)
The series is
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Cheers,
Benjamin
> else
> dev_err(&ts_data->spi->dev,
> "%s unknown packet type: %x, ignoring...\n",
> @@ -224,6 +282,46 @@ static int surface3_spi_create_touch_input(struct surface3_ts_data *data)
> return 0;
> }
>
> +static int surface3_spi_create_pen_input(struct surface3_ts_data *data)
> +{
> + struct input_dev *input;
> + int error;
> +
> + input = devm_input_allocate_device(&data->spi->dev);
> + if (!input)
> + return -ENOMEM;
> +
> + data->pen_input_dev = input;
> +
> + __set_bit(INPUT_PROP_DIRECT, input->propbit);
> + __set_bit(INPUT_PROP_POINTER, input->propbit);
> + input_set_abs_params(input, ABS_X, 0, 9600, 0, 0);
> + input_abs_set_res(input, ABS_X, 40);
> + input_set_abs_params(input, ABS_Y, 0, 7200, 0, 0);
> + input_abs_set_res(input, ABS_Y, 48);
> + input_set_abs_params(input, ABS_PRESSURE, 0, 1024, 0, 0);
> + input_set_capability(input, EV_KEY, BTN_TOUCH);
> + input_set_capability(input, EV_KEY, BTN_STYLUS);
> + input_set_capability(input, EV_KEY, BTN_TOOL_PEN);
> + input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER);
> +
> + input->name = "Surface3 SPI Pen Input";
> + input->phys = "input/ts";
> + input->id.bustype = BUS_SPI;
> + input->id.vendor = 0x045e; /* Microsoft */
> + input->id.product = 0x0002;
> + input->id.version = 0x0000;
> +
> + error = input_register_device(input);
> + if (error) {
> + dev_err(&data->spi->dev,
> + "Failed to register input device: %d", error);
> + return error;
> + }
> +
> + return 0;
> +}
> +
> static int surface3_spi_probe(struct spi_device *spi)
> {
> struct surface3_ts_data *data;
> @@ -255,6 +353,10 @@ static int surface3_spi_probe(struct spi_device *spi)
> if (error)
> return error;
>
> + error = surface3_spi_create_pen_input(data);
> + if (error)
> + return error;
> +
> error = devm_request_threaded_irq(&spi->dev, spi->irq,
> NULL, surface3_spi_irq_handler,
> IRQF_ONESHOT,
> --
> 2.8.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
