Am 2016-05-23 um 14:26 schrieb Oliver Neukum:
> On Mon, 2016-05-23 at 13:39 +0200, Martin Kepplinger wrote:
>
>> It's *really* fun to use as an input tablet though! So let's support this
>> for everybody.
>
> Hi,
>
> I am afraid there are a few issues.
Thanks for having a look, comments below.
>
> 1. Why the kernel thread?
I provide switching to the xy tablet mode by pressing a button during
runtime. So usb_control_msg() is called from the thread, not the
interrupt routine.
We don't get in the way of any user app. If we leave that functionality
out, users may have to un- and replug in the device after using
userspace apps that transfer data or the like.
> 2. This driver has questionable power management.
I think I do it how others do it. Suspend/resume works. Anything
specific required here?
thanks!
martin
>
> Regards
> Oliver
>
>> +static int pegasus_probe(struct usb_interface *intf,
>> + const struct usb_device_id *id)
>> +{
>> + struct usb_device *dev = interface_to_usbdev(intf);
>> + struct usb_endpoint_descriptor *endpoint;
>> + struct pegasus *pegasus;
>> + struct input_dev *input_dev;
>> + int error;
>> + int pipe, maxp;
>> +
>> + /* we control interface 0 */
>> + if (intf->cur_altsetting->desc.bInterfaceNumber == 1)
>> + return -ENODEV;
>> +
>> + endpoint = &intf->cur_altsetting->endpoint[0].desc;
>> +
>> + pegasus = kzalloc(sizeof(*pegasus), GFP_KERNEL);
>> + input_dev = input_allocate_device();
>> + if (!pegasus || !input_dev) {
>> + error = -ENOMEM;
>> + goto err_free_mem;
>> + }
>> +
>> + pegasus->usbdev = dev;
>> + pegasus->dev = input_dev;
>> +
>> + pegasus->data = usb_alloc_coherent(dev, endpoint->wMaxPacketSize,
>> + GFP_KERNEL, &pegasus->data_dma);
>> + if (!pegasus->data) {
>> + error = -ENOMEM;
>> + goto err_free_mem;
>> + }
>> +
>> + pegasus->irq = usb_alloc_urb(0, GFP_KERNEL);
>> + if (!pegasus->irq) {
>> + error = -ENOMEM;
>> + goto err_free_mem;
>> + }
>> +
>> + pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
>> + maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
>> + pegasus->data_len = maxp;
>> +
>> + usb_fill_int_urb(pegasus->irq, dev, pipe, pegasus->data, maxp,
>> + pegasus_irq, pegasus, endpoint->bInterval);
>> +
>> + pegasus->irq->transfer_dma = pegasus->data_dma;
>> + pegasus->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
>> +
>> + if (dev->manufacturer)
>> + strlcpy(pegasus->name, dev->manufacturer,
>> + sizeof(pegasus->name));
>> +
>> + if (dev->product) {
>> + if (dev->manufacturer)
>> + strlcat(pegasus->name, " ", sizeof(pegasus->name));
>> + strlcat(pegasus->name, dev->product, sizeof(pegasus->name));
>> + }
>> +
>> + if (!strlen(pegasus->name))
>> + snprintf(pegasus->name, sizeof(pegasus->name),
>> + "USB Pegasus Device %04x:%04x",
>> + le16_to_cpu(dev->descriptor.idVendor),
>> + le16_to_cpu(dev->descriptor.idProduct));
>> +
>> + usb_make_path(dev, pegasus->phys, sizeof(pegasus->phys));
>> + strlcat(pegasus->phys, "/input0", sizeof(pegasus->phys));
>> +
>> + usb_set_intfdata(intf, pegasus);
>> +
>> + input_dev->name = pegasus->name;
>> + input_dev->phys = pegasus->phys;
>> + usb_to_input_id(dev, &input_dev->id);
>> + input_dev->dev.parent = &intf->dev;
>> +
>> + input_set_drvdata(input_dev, pegasus);
>> +
>> + input_dev->open = pegasus_open;
>> + input_dev->close = pegasus_close;
>> +
>> + __set_bit(EV_ABS, input_dev->evbit);
>> + __set_bit(EV_KEY, input_dev->evbit);
>> +
>> + __set_bit(ABS_X, input_dev->absbit);
>> + __set_bit(ABS_Y, input_dev->absbit);
>> +
>> + __set_bit(BTN_TOUCH, input_dev->keybit);
>> + __set_bit(BTN_RIGHT, input_dev->keybit);
>> + __set_bit(BTN_TOOL_PEN, input_dev->keybit);
>> +
>> + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
>> + __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>> +
>> + input_set_abs_params(input_dev, ABS_X, -1500, 1500, 8, 0);
>> + input_set_abs_params(input_dev, ABS_Y, 1600, 3000, 8, 0);
>> +
>> + error = input_register_device(pegasus->dev);
>> + if (error)
>> + goto err_free_dma;
>> +
>> + pegasus_thread = kthread_run(pegasus_threadf, pegasus,
>> + "pegasus_notetaker_thread");
>
> Why is that needed?
See comment above.
>
>> + if (IS_ERR(pegasus_thread)) {
>> + error = -ENOMEM;
>> + goto err_free_dma;
>> + }
>> +
>> + return 0;
>> +
>> +err_free_dma:
>> + usb_free_coherent(dev, pegasus->data_len,
>> + pegasus->data, pegasus->data_dma);
>> +
>> + usb_free_urb(pegasus->irq);
>> +err_free_mem:
>> + kfree(pegasus);
>> + usb_set_intfdata(intf, NULL);
>> +
>> + return error;
>> +}
>> +
>> +static void pegasus_disconnect(struct usb_interface *intf)
>> +{
>> + struct pegasus *pegasus = usb_get_intfdata(intf);
>> +
>> + input_unregister_device(pegasus->dev);
>> + if (pegasus_thread) {
>> + if (kthread_stop(pegasus_thread) == -EINTR)
>> + dev_err(&pegasus->usbdev->dev,
>> + "wake_up_proc was never called\n");
>> + }
>> +
>> + usb_free_urb(pegasus->irq);
>> + usb_free_coherent(interface_to_usbdev(intf),
>> + pegasus->data_len, pegasus->data,
>> + pegasus->data_dma);
>> + kfree(pegasus);
>> + usb_set_intfdata(intf, NULL);
>> +}
>> +
>> +static const struct usb_device_id pegasus_ids[] = {
>> + { USB_DEVICE(USB_VENDOR_ID_PEGASUSTECH,
>> + USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100) },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(usb, pegasus_ids);
>> +
>> +static struct usb_driver pegasus_driver = {
>> + .name = "pegasus_notetaker",
>> + .probe = pegasus_probe,
>> + .disconnect = pegasus_disconnect,
>> + .id_table = pegasus_ids,
>> +};
>> +
>> +module_usb_driver(pegasus_driver);
>> +
>> +MODULE_AUTHOR("Martin Kepplinger <martink@xxxxxxxxx>");
>> +MODULE_DESCRIPTION("Pegasus Mobile Notetaker Pen tablet driver");
>> +MODULE_LICENSE("GPL");
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
