On Sun, Feb 14, 2016 at 02:31:21PM +0100, Linus Walleij wrote: > commit e4b88e19897f1039fd83f1630517becafc0dd163 > "Input: stmpe-ts - enforce device tree only mode" > removed platform data but accidentally stripped away useful > kerneldoc, so reintroduce it. > > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Applied, thank you. > --- > drivers/input/touchscreen/stmpe-ts.c | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c > index e414d43e5159..2a78e27b4495 100644 > --- a/drivers/input/touchscreen/stmpe-ts.c > +++ b/drivers/input/touchscreen/stmpe-ts.c > @@ -63,6 +63,37 @@ > #define STMPE_TS_NAME "stmpe-ts" > #define XY_MASK 0xfff > > +/** > + * struct stmpe_touch - stmpe811 touch screen controller state > + * @stmpe: pointer back to STMPE MFD container > + * @idev: registered input device > + * @work: a work item used to scan the device > + * @dev: a pointer back to the MFD cell struct device* > + * @sample_time: ADC converstion time in number of clock. > + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, > + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), > + * recommended is 4. > + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) > + * @ref_sel: ADC reference source > + * (0 -> internal reference, 1 -> external reference) > + * @adc_freq: ADC Clock speed > + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) > + * @ave_ctrl: Sample average control > + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) > + * @touch_det_delay: Touch detect interrupt delay > + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, > + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) > + * recommended is 3 > + * @settling: Panel driver settling time > + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, > + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) > + * recommended is 2 > + * @fraction_z: Length of the fractional part in z > + * (fraction_z ([0..7]) = Count of the fractional part) > + * recommended is 7 > + * @i_drive: current limit value of the touchscreen drivers > + * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) > + */ > struct stmpe_touch { > struct stmpe *stmpe; > struct input_dev *idev; > -- > 2.4.3 > -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html