On Tue, Feb 02, 2016 at 05:45:05PM -0800, Andrew Duggan wrote: > 2D sensors have several parameter which can be set in the platform data. > This patch adds support for getting those values from devicetree. > > Signed-off-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx> > --- > .../bindings/input/rmi4/rmi_2d_sensor.txt | 56 +++++++++++ > .../bindings/input/touchscreen/touchscreen.txt | 2 + > drivers/input/rmi4/rmi_2d_sensor.c | 108 +++++++++++++++++++++ > drivers/input/rmi4/rmi_2d_sensor.h | 3 + > drivers/input/rmi4/rmi_f11.c | 7 +- > 5 files changed, 175 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt > > diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt > new file mode 100644 > index 0000000..470d326 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt > @@ -0,0 +1,56 @@ > +Synaptics RMI4 2D Sensor Device Binding > + > +The Synaptics RMI4 core is able to support RMI4 devices using different > +transports and different functions. This file describes the device tree > +bindings for devices which contain 2D sensors using Function 11 or > +Function 12. Complete documentation for transports and other functions > +can be found in: > +Documentation/devicetree/bindings/input/rmi4. > + > +RMI4 Function 11 and Function 12 are for 2D touch position sensing. > +Additional documentation for F11 can be found at: > +http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf > + > +Optional Touch Properties: > +Description in Documentation/devicetree/bindings/input/touch > +- touchscreen-inverted-x > +- touchscreen-inverted-y > +- touchscreen-swapped-x-y > +- touchscreen-mm-x > +- touchscreen-mm-y > + > +Optional Properties: > +- syna,clip-x-low: Sets a minimum value for X. > +- syna,clip-y-low: Sets a minimum value for Y. > +- syna,clip-x-high: Sets a maximum value for X. > +- syna,clip-y-high: Sets a maximum value for Y. > +- syna,offset-x: Add an offset to X. > +- syna,offset-y: Add an offset to Y. > +- syna,delta-x-threshold: Set the minimum distance on the X axis required > + to generate an interrupt in reduced reporting > + mode. > +- syna,delta-y-threshold: Set the minimum distance on the Y axis required > + to generate an interrupt in reduced reporting > + mode. > +- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad. > +- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to > + disable reporing absolute position data. > +- syna,rezero-wait-msec: Time in miliseconds to wait after issuing a rezero > + command. s/msec/ms/ Sorry. > + > + > +Example of a RMI4 I2C device with F11: > +Example: > + &i2c1 { > + rmi4-i2c-dev@2c { > + compatible = "syna,rmi4-i2c"; > + > + ... > + > + rmi4-f11@11 { > + reg = <0x11>; > + touchscreen-inverted-y; > + syna,sensor-type = <2>; > + }; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt > index ac23caf..d6674de 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt > @@ -18,6 +18,8 @@ Optional properties for Touchscreens: > - touchscreen-inverted-y : Y axis is inverted (boolean) > - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) > Swapping is done after inverting the axis > + - touchscreen-mm-x : horizontal length in mm of the touchscreen > + - touchscreen-mm-y : vertical length in mm of the touchscreen In keeping with units on the end, make it touchscreen-x-mm Otherwise, Acked-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
