On Sun, Jan 10, 2016 at 06:36:08PM +0100, Oreste Salerno wrote: > Signed-off-by: Oreste Salerno <oreste.salerno@xxxxxxxxxx> > --- > .../bindings/input/touchscreen/cyttsp.txt | 82 +++++++++++++ > drivers/input/touchscreen/cyttsp_core.c | 134 +++++++++++++++++++-- > include/linux/input/cyttsp.h | 3 + > 3 files changed, 212 insertions(+), 7 deletions(-) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt > new file mode 100644 > index 0000000..2dc5c65 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt > @@ -0,0 +1,82 @@ > +* Cypress cyttsp touchscreen controller > + > +Required properties: > +- compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi" > +- reg : Device I2C address or SPI chip select number > +- spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi) > +- interrupt-parent : the phandle for the gpio controller > + (see interrupt binding[0]). > +- interrupts : (gpio) interrupt to which the chip is connected > + (see interrupt binding[0]). > +- reset-gpios : the reset gpio the chip is connected to > + (see GPIO binding[1] for more details). > +- touchscreen-size-x : horizontal resolution of touchscreen (in pixels) > +- touchscreen-size-y : vertical resolution of touchscreen (in pixels) > +- bootloader-key : the 8-byte bootloader key that is required to switch > + the chip from bootloader mode (default mode) to > + application mode. > + This property has to be specified as an array of 8 > + '/bits/ 8' values. > + > +Optional properties: > +- active-distance : the distance in pixels beyond which a touch must move > + before movement is detected and reported by the device. > + Valid values: 0-15. Wouldn't this be the same as touchscreen-fuzz-(x|y) which is the replacement for the deprecated moving-threshold? > +- active-interval-ms : the minimum period in ms between consecutive > + scanning/processing cycles when the chip is in active mode. > + Valid values: 0-255. > +- lowpower-interval-ms : the minimum period in ms between consecutive > + scanning/processing cycles when the chip is in low-power mode. > + Valid values: 0-2550 > +- touch-timeout-ms : minimum time in ms spent in the active power state while no > + touches are detected before entering low-power mode. > + Valid values: 0-2550 > + Otherwise, looks fine. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
