Commit c7f0522 reports incorrect touchring values to userspace. This is due to its incorrect handling of the 'touched' bit present in the 'ring1' and 'ring2' variables. Instead of using this bit when determining if a value should be sent, the ABS_WHEEL and ABS_INPUT check (different?!) portions of the position bits. Furthermore, the full values of 'ring1' and 'ring2' are reported to userspace, despite the 'touched' flag needing to be trimmed beforehand. This commit addresses both issues. Signed-off-by: Jason Gerecke <jason.gerecke@xxxxxxxxx> --- drivers/hid/wacom_wac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 94dffde..23212af 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -560,8 +560,8 @@ static int wacom_intuos_pad(struct wacom_wac *wacom) input_report_abs(input, ABS_RX, strip1); input_report_abs(input, ABS_RY, strip2); - input_report_abs(input, ABS_WHEEL, ring1 & 0x7f ? ring1 : 0); - input_report_abs(input, ABS_THROTTLE, ring2 & 0x07 ? ring2 : 0); + input_report_abs(input, ABS_WHEEL, (ring1 & 0x80) ? (ring1 & 0x7f) : 0); + input_report_abs(input, ABS_THROTTLE, (ring2 & 0x80) ? (ring2 & 0x7f) : 0); input_report_key(input, wacom->tool[1], prox ? 1 : 0); input_report_abs(input, ABS_MISC, prox ? PAD_DEVICE_ID : 0); -- 2.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
