Re: [PATCH 09/10] Input: synaptics-rmi4: Add device tree support to the SPI transport driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 25, 2015 at 04:10:25PM -0800, Andrew Duggan wrote:
> Add devicetree binding for SPI devices.
> 
> Signed-off-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/input/rmi4/rmi_spi.txt     | 57 ++++++++++++++++++++++
>  drivers/input/rmi4/rmi_spi.c                       | 44 ++++++++++++++++-
>  2 files changed, 100 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
> new file mode 100644
> index 0000000..f20366b6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
> @@ -0,0 +1,57 @@
> +Synaptics RMI4 SPI Device Binding
> +
> +The Synaptics RMI4 core is able to support RMI4 devices using differnet
> +transports and differnet functions. This file describes the device tree
> +bindings for devices using the SPI tranport driver. Complete documentation
> +for other transports and functions cen be found ini
> +Documentation/devicetree/bindings/input/rmi4.
> +
> +Required Properties:
> +- compatible: syna,rmi-spi
> +- reg: Chip select address for the device
> +- #address-cells: Set to 1 to indicate that the function child nodes
> +		    consist of only on uint32 value.
> +- #size-cells: Set to 0 to indicate that the function child nodes do not
> +		have a size property.
> +
> +Optional Properties:
> +- interrupts: interrupt which the rmi device is connected to.
> +- interrupt-parent: The interrupt controller.
> +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> +
> +- syna,spi-read-delay: millisecond delay between read byte transfers.
> +- syna,spi-write-delay: millisecond delay between write byte transfers.

These could possibly be common SPI properties, but they would need to be 
somewhat better defined as every access on SPI is a read and a write. 
What if you have a read then write or write then read? Just a time 
between transfers would probably make more sense.

Minimally, they should have -msec suffix.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux