On Thu, 2015-11-19 at 14:26 +0200, Irina Tirdea wrote: > After power on, it is recommended that the driver resets the device. > The reset procedure timing is described in the datasheet and is used > at device init (before writing device configuration) and > for power management. It is a sequence of setting the interrupt > and reset pins high/low at specific timing intervals. This procedure > also includes setting the slave address to the one specified in the > ACPI/device tree. This fails on a 4.3 kernel with an ACPI device (WinBook TW100): Goodix-TS: probe of i2c-GDIX1001:00 failed with error -16 Can you please document which upstream commit is necessary to make this behave properly? I'll test again with a newer kernel. Cheers -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
