On Sun, Aug 02, 2015 at 11:09:48AM +0200, Geert Uytterhoeven wrote: > The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is > not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer > functionality only, can still be compiled if GPIOLIB is not enabled. > > Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where > appropriate. > > Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> > Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Applied, thank you. > --- > v2: > - Add Acked-by. > --- > drivers/input/keyboard/Kconfig | 4 ++-- > drivers/input/misc/Kconfig | 11 ++++++----- > drivers/input/mouse/Kconfig | 2 +- > drivers/input/touchscreen/Kconfig | 8 ++++---- > 4 files changed, 13 insertions(+), 12 deletions(-) > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index 82a8fb50afacb253..da53ae6a93346c90 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -187,7 +187,7 @@ config KEYBOARD_EP93XX > > config KEYBOARD_GPIO > tristate "GPIO Buttons" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > This driver implements support for buttons connected > to GPIO pins of various CPUs (and some other chips). > @@ -253,7 +253,7 @@ config KEYBOARD_TCA8418 > > config KEYBOARD_MATRIX > tristate "GPIO driven matrix keypad support" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > select INPUT_MATRIXKMAP > help > Enable support for GPIO driven matrix keypad. > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig > index d4f0a817e858262b..dade381c7da80eb9 100644 > --- a/drivers/input/misc/Kconfig > +++ b/drivers/input/misc/Kconfig > @@ -259,7 +259,7 @@ config INPUT_APANEL > config INPUT_GP2A > tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver" > depends on I2C > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip > hooked to an I2C bus. > @@ -269,7 +269,7 @@ config INPUT_GP2A > > config INPUT_GPIO_BEEPER > tristate "Generic GPIO Beeper support" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say Y here if you have a beeper connected to a GPIO pin. > > @@ -278,7 +278,7 @@ config INPUT_GPIO_BEEPER > > config INPUT_GPIO_TILT_POLLED > tristate "Polled GPIO tilt switch" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > select INPUT_POLLDEV > help > This driver implements support for tilt switches connected > @@ -569,7 +569,7 @@ config INPUT_PWM_BEEPER > > config INPUT_GPIO_ROTARY_ENCODER > tristate "Rotary encoders connected to GPIO pins" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say Y here to add support for rotary encoders connected to GPIO lines. > Check file:Documentation/input/rotary-encoder.txt for more > @@ -776,7 +776,8 @@ config INPUT_SOC_BUTTON_ARRAY > > config INPUT_DRV260X_HAPTICS > tristate "TI DRV260X haptics support" > - depends on INPUT && I2C && GPIOLIB > + depends on INPUT && I2C > + depends on GPIOLIB || COMPILE_TEST > select INPUT_FF_MEMLESS > select REGMAP_I2C > help > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig > index d7820d1152d2ef2d..17f97e5e11e7cd2e 100644 > --- a/drivers/input/mouse/Kconfig > +++ b/drivers/input/mouse/Kconfig > @@ -341,7 +341,7 @@ config MOUSE_VSXXXAA > > config MOUSE_GPIO > tristate "GPIO mouse" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > select INPUT_POLLDEV > help > This driver simulates a mouse on GPIO lines of various CPUs (and some > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index 860d426c480e2088..059edeb7f04a0d40 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -118,7 +118,7 @@ config TOUCHSCREEN_ATMEL_MXT > config TOUCHSCREEN_AUO_PIXCIR > tristate "AUO in-cell touchscreen using Pixcir ICs" > depends on I2C > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say Y here if you have a AUO display with in-cell touchscreen > using Pixcir ICs. > @@ -142,7 +142,7 @@ config TOUCHSCREEN_BU21013 > > config TOUCHSCREEN_CHIPONE_ICN8318 > tristate "chipone icn8318 touchscreen controller" > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > depends on I2C > depends on OF > help > @@ -156,7 +156,7 @@ config TOUCHSCREEN_CHIPONE_ICN8318 > config TOUCHSCREEN_CY8CTMG110 > tristate "cy8ctmg110 touchscreen" > depends on I2C > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say Y here if you have a cy8ctmg110 capacitive touchscreen on > an AAVA device. > @@ -1030,7 +1030,7 @@ config TOUCHSCREEN_TPS6507X > config TOUCHSCREEN_ZFORCE > tristate "Neonode zForce infrared touchscreens" > depends on I2C > - depends on GPIOLIB > + depends on GPIOLIB || COMPILE_TEST > help > Say Y here if you have a touchscreen using the zforce > infraread technology from Neonode. > -- > 1.9.1 > -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
