Add support for different configurations of charger's registers so the same driver could be used on other devices (e.g. MAX77843). Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx> Acked-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/regulator/max77693.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c index 38722c8311a5..236851ab575a 100644 --- a/drivers/regulator/max77693.c +++ b/drivers/regulator/max77693.c @@ -33,7 +33,13 @@ #include <linux/regulator/of_regulator.h> #include <linux/regmap.h> -#define CHGIN_ILIM_STEP_20mA 20000 +/* Charger regulator differences between MAX77693 and MAX77843 */ +struct chg_reg_data { + unsigned int linear_reg; + unsigned int linear_mask; + unsigned int uA_step; + unsigned int min_sel; +}; /* * CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA @@ -42,25 +48,26 @@ */ static int max77693_chg_get_current_limit(struct regulator_dev *rdev) { + const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev); unsigned int chg_min_uA = rdev->constraints->min_uA; unsigned int chg_max_uA = rdev->constraints->max_uA; unsigned int reg, sel; unsigned int val; int ret; - ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, ®); + ret = regmap_read(rdev->regmap, reg_data->linear_reg, ®); if (ret < 0) return ret; - sel = reg & CHG_CNFG_09_CHGIN_ILIM_MASK; + sel = reg & reg_data->linear_mask; /* the first four codes for charger current are all 60mA */ - if (sel <= 3) + if (sel <= reg_data->min_sel) sel = 0; else - sel -= 3; + sel -= reg_data->min_sel; - val = chg_min_uA + CHGIN_ILIM_STEP_20mA * sel; + val = chg_min_uA + reg_data->uA_step * sel; if (val > chg_max_uA) return -EINVAL; @@ -70,20 +77,20 @@ static int max77693_chg_get_current_limit(struct regulator_dev *rdev) static int max77693_chg_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA) { + const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev); unsigned int chg_min_uA = rdev->constraints->min_uA; int sel = 0; - while (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel < min_uA) + while (chg_min_uA + reg_data->uA_step * sel < min_uA) sel++; - if (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel > max_uA) + if (chg_min_uA + reg_data->uA_step * sel > max_uA) return -EINVAL; /* the first four codes for charger current are all 60mA */ - sel += 3; + sel += reg_data->min_sel; - return regmap_write(rdev->regmap, - MAX77693_CHG_REG_CHG_CNFG_09, sel); + return regmap_write(rdev->regmap, reg_data->linear_reg, sel); } /* end of CHARGER regulator ops */ @@ -145,6 +152,13 @@ static const struct regulator_desc regulators[] = { }, }; +static const struct chg_reg_data max77693_chg_reg_data = { + .linear_reg = MAX77693_CHG_REG_CHG_CNFG_09, + .linear_mask = CHG_CNFG_09_CHGIN_ILIM_MASK, + .uA_step = 20000, + .min_sel = 3, +}; + static int max77693_pmic_probe(struct platform_device *pdev) { struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent); @@ -153,6 +167,7 @@ static int max77693_pmic_probe(struct platform_device *pdev) config.dev = iodev->dev; config.regmap = iodev->regmap; + config.driver_data = (void *)&max77693_chg_reg_data; for (i = 0; i < ARRAY_SIZE(regulators); i++) { struct regulator_dev *rdev; @@ -170,7 +185,7 @@ static int max77693_pmic_probe(struct platform_device *pdev) } static const struct platform_device_id max77693_pmic_id[] = { - {"max77693-pmic", 0}, + { "max77693-pmic", TYPE_MAX77693 }, {}, }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html