On Thu, Jul 9, 2015 at 4:49 PM, SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx> wrote: >>>> The gpiod_put() function performs also input parameter validation >>>> by forwarding its single input pointer to the gpiod_free() function. >>>> Thus the test around the calls is not needed. >>>> >>>> This issue was detected by using the Coccinelle software. >>>> >>>> Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx> >>> >>> As Dan correctly pointed out, this is not as straightforward as it might >>> seem on a firsr sight, because there is a WARN_ON() that might start >>> triggering in case of !ihid->desc. >>> >>> Adding Benjamin. I am not applying this without his Ack. >>> >> >> I think the gpiod case is the exception rather than the common rule >> (most i2c-hid device we saw until recently were using irqs, not >> gpios). So if I understand correctly, removing the check on ihid->desc >> would raise a warning for most devices. This is IMO not a good thing, >> so I would say NACK. >> >> Mika might have a different opinion though. > > The proposed update candidates are contained in the source > file "drivers/hid/i2c-hid/i2c-hid.c" from Linux next-20150708. > > * i2c_hid_remove() function: > Can it be tolerated here that the pointer "ihid->desc" might be eventually null? > > * i2c_hid_probe() function: > Is this implementation structured in such a way that a pointer for valid data > will be usually passed for "ihid->desc" if the statements after the jump > label "err" will be reached? > Again, in both case it is completely normal to have "ihid->desc == NULL" given that this field is only retrieved in case of an ACPI device which does not declares an IRQ but a GPIO. Most ACPI devices I saw are using a simple IRQ, and the OF instantiations of the driver will definitively have ihid->desc null. So I do not want to have a warning for most of i2c-hid devices out there (because I will have to explain that this is completely normal again and again). Cheers, Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
